Liquid handling properties of hollow viscose rayon/super absorbent fibers nonwovens for reusable incontinence products

To develop reusable incontinence products, blend nonwovens of hollow viscose rayon (HVR) and super absorbent fibers (SAFs) were prepared using a needle-punching process and their liquid handling properties, such as the fluid absorption capacity, fluid retention capacity, fluid absorption under load, moisture evaporation rate, and repeated water absorption were investigated. As the SAF content in the HVR/SAF blend nonwovens was increased, the fluid absorption capacity, fluid retention capacity, and fluid absorption under load increased, whereas the moisture evaporation rate decreased. SAF had a more significant effect on fluid retention than fluid absorption. In the case of HVR/SAF(8/2) and HVR/SAF(7/3), more than 100 % of the fluid absorption capacity was retained even after 5 cycles of repeated water absorption tests. Overall, the HVR/SAF blend nonwovens are good candidates for reusable incontinence products.     

Injection molding of vertebral fixed cage implant

A vertebral cage is a hollow medical device which is used in spine surgery. By implanting the cage into the spine column, it is possible to restore disc and relieve pressure on the nerve roots. Most cages have been made of titanium alloys but they detract the biocompatibility. Currently PEEK (polyether ether ketone) is applied to various implants because it has good properties like heat resistance, chemical resistance, strength, and especially biocompatibility. A new shape of vertebral cage is designed and injection molding of PEEK is considered for production. Before injection molding of the cage, it is needed to evaluate process conditions and properties of the final product. Variables affecting the shrinkage of the cage are considered, e.g., injection time, packing pressure, mold temperature, and melt temperature. By using the numerical simulation program, MOLDFLOW, several cases are studied. Data files obtained by MOLDFLOW analysis are used for stress analysis with ABAQUS, and shrinkage and residual stress fields are predicted. With these results, optimum process conditions are determined.     

Durable press finish of cotton via dual curing using UV light and heat

Continuous photografting/crosslinking of polyethyleneglycol dimethacrylate oligomers onto cotton using a water-soluble benzophenone photoinitiator was investigated. Photografting increased with increasing irradiation dose, oligomer concentration and photoinitiator concentration. Maximum grafting efficiency of DM 400 and 600 were 83% and 79%, respectively. The photografting increased the wrinkle resistance of cotton implying surface crosslinking of cotton. Both surface crosslinking and bulk crosslinking of cotton were accomplished via dual curing of a mixed formulation containing both a thermally curable component (BTCA/SHP) and a UV-curable component. The wrinkle resistance of the crosslinked cotton was found to be higher when cured by thermal curing after UV curing rather than by UV curing after thermal curing due to the facile post-polymerization of the UV active component. The presence of crosslinks in the dually crosslinked cotton was verified with FT-IR and thermogravimetric analysis.     

Allosteric supramolecular triple-layer catalysts

Allosteric regulation of organometallic catalysts could allow for greater control over reactions. We report an allosteric supramolecular structure in which a monometallic catalytic site has been buried in the middle layer of a triple-layer complex. Small molecules and elemental anions can open and close this complex and reversibly expose and conceal the catalytic center. The ring-opening polymerization of ε-caprolactone can be turned on by the in situ opening of the triple-layer complex and then completely turned off by reforming it through the abstraction of Cl(-), the allosteric effector agent, without appreciable loss of catalytic activity. This process can regulate the molecular weights of the resulting polymers.     

Dyeing of cotton and polyester/cotton blend with disperse dyes using sodium 2-(2,3-dibromopropionylamino)-5-(4,6-dichloro-1,3,5-triazinylamino)-benzenesulfonate

The cotton fabrics were pretreated by sodium 2-(2,3-dibromopropionylamino)-5-(4,6-dichloro-1,3,5-triazinylamino)-benzenesulfonate (DBDCBS) at alkaline condition of room temperature and then dyed with four disperse dyes having amino groups (C.I. Disperse Yellow 9, C.I. Disperse Red 11, C.I. Disperse Blue 56 and C.I. Disperse Violet 1) at acidic condition of high temperature. A novel hetero-bifunctional bridge compound,DBDCBS, has two reactive groups such as dichloro-s-triazinyl group andα, β-dibromopropionylamido group. The first has reactivity towards hydroxy group of cellulosic fiber and the second shows reactivity towards amino groups of disperse dye containing amino groups. The results indicate that it is possible to dye polyester/cotton blend at one-bath dyeing using one kind of disperse dye containing amino groups. Therefore, two kinds of dyeing methods such as two-bath process one-bath dyeing and one-bath process one-bath dyeing were investigated and their dyeabilities were compared. The differences between these two methods were negligibly small so that perfect one-bath one-step dyeing of polyester/cotton blend by one kind of disperse dye was achieved.     

One-step continuous coating of silver nanoparticles on well aligned fibers of PAI/PTACM

Highly aligned ultrafine fibers of Poly (amide-co-imide) PAI (torlon)/Poly (trimellitic anhydride chloride-co-4, 4′-methylene dianiline) (PTACM) blends have been prepared by using mechano-electrospinning. Employing a mixed solvent system of DMSO and THF alongwith water coagulation bath as a medium, continuous fibers with improved mechanical properties have been obtained. The continuity of the fibers is strongly dependent on the solvent mixing ratio of DMSO and THF (6:4). Continuous fibers with the most uniform diameter are obtained when a 30 % of PAI and PTACM (1:1) resins by weight is used in the blending solution. The aligned fibers are further coated with silver nanoparticles using a one-step process by passing the electrospunned fibers through PEG solution and a silver precursor solution followed by reduction in a continuous process. The advantage of our method lies in a uniform silver coating on a single fiber that can be coated continuously on a larger length scale (～Km). The mechanical properties of these fibers are dramatically improved after their alignment. Better electrical conductivity is obtained for these fibers after they are coated with silver nanoparticles. The highly aligned silver decorated fibers utilizes a novel electroless continuous process using Polyethylene glycol (PEG), which shows good binding properties and can be used for various bio and electronic applications.     

Film preparation by melt- or compression-process using poly(vinyl chloride) powder swollen with dimethylformamide

A melt-process was used to prepare high molecular weight Poly(vinyl chloride) (PVC) films without the use of a conventional plasticizer and heat stabilizer. Rigid PVC powder was swollen with dimethylformamide containing 4∼10 vol% water to reduce its melting temperature. The swollen powder was pressed at a relatively low temperature of 75∼125 °C to form a film shape, and then washed and dried. The visible light transmittance, X-ray diffraction, density and the tensile properties of the resulting films were examined to estimate the success or failure of film formation. The films could be produced by not only the melt-process but also a compression-process using the rigid, highly swollen PVC powder. The resulting films had no voids, which are generally observed in PVC products formed by a solution process. The minimum temperature for these processes decreased with decreasing water content in the mixture: The minimum temperatures according to the water content in the mixture to produce faultless films through the melt-process were 4 %–105 °C, 6 %–115 °C, 8 and 10 %–125 °C, while those through the compression process were 4 %–95 °C, 6 and 8 %–105 °C, 10 %–115 °C.     

Anticancer Activity of Mannose-Specific Lectin,BPL2, from Marine Green Alga Bryopsis plumosa

Lectin is a carbohydrate-binding protein that recognizes specific cells by binding to cell-surface polysaccharides. Tumor cells generally show various glycosylation patterns, making them distinguishable from non-cancerous cells. Consequently, lectin has been suggested as a good anticancer agent. Herein, the anticancer activity of Bryopsis plumosa lectins (BPL1, BPL2, and BPL3) was screened and tested against lung cancer cell lines (A549, H460, and H1299). BPL2 showed high anticancer activity compared to BPL1 and BPL3. Cell viability was dependent on BPL2 concentration and incubation time. The IC₅₀ value for lung cancer cells was 50 μg/mL after 24 h of incubation in BPL2 containing medium; however, BPL2 (50 μg/mL) showed weak toxicity in non-cancerous cells (MRC5). BPL2 affected cancer cell growth while non-cancerous cells were less affected. Further, BPL2 (20 μg/mL) inhibited cancer cell invasion and migration (rates were ˂20%). BPL2 induced the downregulation of epithelial-to-mesenchymal transition-related genes (Zeb1, vimentin, and Twist). Co-treatment with BPL2 and gefitinib (10 μg/mL and 10 μM, respectively) showed a synergistic effect compared with monotherapy. BPL2 or gefitinib monotherapy resulted in approximately 90% and 70% cell viability, respectively, with concomitant treatment showing 40% cell viability. Overall, BPL2 can be considered a good candidate for development into an anticancer agent.     

A review on microbial and toxic risk analysis procedure for reclaimed wastewater irrigation on paddy rice field proposed for South Korea

Water shortage has become a major agricultural concern, and “The Sustainable Water Resources Research Program” in Korea is currently addressing this problem through the development of treatment systems for reclaiming wastewater and the assessment of human health risks associated with its reuse. Through this program, started in 2001, many studies have examined various water resources. Reclaiming wastewater is one way to alleviate water-shortage pressures, and one of the major potential uses of reclaimed water is irrigation. However, the main concern with reusing reclaimed wastewater is the increased likelihood of human contact that might result in exposure to pathogens and increased health risks. Relatively few studies have examined the toxic risks using reclaimed wastewater for irrigation in rice paddy fields. This study provides an overview of methods for quantitative microbial risk assessment and toxic risk assessment of heavy metal concentrations developed in the previous studies that can be applied to the evaluation of rice paddy fields irrigated with reclaimed wastewater in South Korea.