Crystallographic structure of the octameric histone core of the nucleosome at a resolution of 3.3 A

The structure of the (H2A-H2B-H3-H4)2 histone octamer has been determined by means of x-ray crystallographic techniques at a resolution of 3.3 angstroms. The octamer is a prolate ellipsoid 110 angstroms long and 65 to 70 angstroms in diameter, and its general shape is that of a rugby ball. The size and shape are radically different from those determined in earlier studies. The most striking feature of the histone octamer is its tripartite organization, that is, a central (H3-H4)2 tetramer flanked by two H2A-H2B dimers. The DNA helix, placed around the octamer in a path suggested by the features on the surface of the protein, appears like a spring holding the H2A-H2B dimers at either end of the (H3-H4)2 tetramer.     

Evapotranspiration and crop coefficient of Populus euphratica Oliv forest during the growing season in the extreme arid region northwest China

Based on successive observation, fifteen-day evapotranspiration (ET_c) of Populus euphratica Oliv forest, in the extreme arid region northwest China, was estimated by application of Bowen ratio-energy balance method (BREB) during the growing season in 2005. During the growing season in 2005, total ET_c was 446.96 mm. From the beginning of growing season, the ET_c increased gradually, and reached its maximum value of 6.724 mm d⁻¹ in the last fifteen days of June. Hereafter the ET_c dropped rapidly, and reached its minimum value of 1.215 mm d⁻¹ at the end of growing season. The variation pattern of crop coefficient (K_c) was similar to that of ET_c. From the beginning of growing season, the K_c value increased rapidly, and reached its maximum value of 0.623 in the last fifteen days of June. Afterward, with slowing growth of P. euphratica, the value dropped rapidly to the end of growing season. According to this study, the ET_c of P. euphratica forest is affected not only by meteorological factors, but by water content in soil.     

Field performance of embryogenic cell suspension-derived banana plants (Musa AAA, cv. Grande naine)

Growth and yield characteristics of two different clones of banana plants (Musa AAA cv. Grande naine) originating from four months old embryogenic cell suspensions were studied. These characteristics were compared with those plants produced by the conventional in vitro budding multiplication method. Two types of variants were observed during the acclimatization phase among 500 embryogenic cell suspension derived plants. The first type related to banana plants with `variegated or deformed leaves' were also observed in in vitro budding derived plants. The second type concerned `fasciated-leafed' plants. During the field growth, these two variant types produced plants morphologically similar to the other plants. Thus, none of the cell suspension derived plants exhibited off-type traits in the field. A Fisher block model was used to compare the field performances of the two clones produced through the two in vitro propagation techniques. The analysis of variance showed that there were no significant differences between the plants produced by either micropropagation techniques for the plant height and circumference, the length of the reference leaf, the number of nodal clusters of the inflorescence and of fruits, the bunch weight, the period of time between planting and flowering, and between planting and harvesting. This study showed that banana plants with an agronomical behaviour similar to those produced by the conventional in vitro budding method could be regenerated from embryogenic cell suspension. This revised version was published online in July 2006 with corrections to the Cover Date.     

Assessment of cytoplasmic effects of cytoplasmic male-sterile lines in upland cotton

Paired A- and B-lines, cytoplasmic male-sterile (CMS)-lines and main-tainer lines, respectively, were crossed with R-lines (restorer) to produce A × R, R × B and B × R hybrids, which were used in 1993 and 1996 to predict the performance of three lypes of CMS cotton lines available in China. A significant difference in yield and yield components was revealed between paired A × R and B × R hybrids. This difference was greatly influenced by both CMS cytoplasm and the interaction between cytoplasm and nuclear genotypes. It is suggested that there are detrimental effects of CMS cytoplasm on yield and yield components. General combining ability of near-isogenic CMS lines was also affected by this negative effect. The detrimental effect was closely related to an increased number of immature seeds per boll, which might be caused by partial female sterility associated with CMS cytoplasm. The possibility of developing specific combinations of CMS Upland × Upland restorer hybrids that express enough heterosis for yield to overcome the detrimental effect of the CMS cytoplasm is discussed.     

QTL mapping for agronomic and fibre traits using two interspecific chromosome substitution lines of Upland cotton

CS‐B14Sh and CS‐B22Sh are cotton interspecific chromosome substitution (CS)‐B lines, in which a pair of short arms of chromosome 14 and chromosome 22 were introgressed from Gossypium barbadense doubled‐haploid line 3‐79 with the background of Gossypium hirsutum line TM‐1, respectively. These two CS‐B lines were crossed with TM‐1, and segregating progenies (F₂ and F_2:3, respectively) were obtained. Phenotypic data of lint yield, yield‐related traits and fibre‐quality traits were collected from two trials. In the cross CS‐B14SH X TM‐1, QTL for boll weight (BW), lint percentage (LP), fibre upper half mean length (UHML), micronaire reading (MIC), and fibre breaking tensile strength (STR) were repeatedly detected. Alleles from 3‐79 decreased BW and MIC, but increased UHML and STR. In the cross CS‐B22Sh X TM‐1, QTL for BW, LP, UHML, MIC, STR, fibre elongation (EL),seed weight(SW), node of first fruiting branch (NFB) and fibre uniformity index (UI) were repeatedly detected, and alleles from 3‐79 decreased UHML, UI and STR, but increased NFB, SW, MIC and EL. QTL clusters were found in both populations.     

Use of component analysis in QTL mapping of complex crop traits: a case study on yield in barley

Genes contributing to the quantitative variation of a complex crop trait can be numerous. However, using existing approaches, the number of quantitative trait loci (QTL) detected for a trait is limited. Therefore, rather than looking for QTL for a complex trait itself, determining QTL for underlying component traits might give more information. In this study the potential of component analysis in QTL mapping of complex traits was examined using grain yield in spring barley as an example. Grain yield was divided into three components: number of spikes/m², number of kernels/spike, and 1000‐kernel weight. These traits were measured for individuals of a recombinant inbred‐line population in field trials conducted over 2 years. By the use of an approximate multiple QTL model, one to eight QTL were detected for each trait in a year. Some QTL were mapped to similar positions in both years. Almost all QTL for yield were found at the position of or in close proximity to QTL for its component traits. A number of QTL for component traits were not detected when yield itself was subjected to QTL analysis. However, relative to the QTL for yield itself, all component‐trait QTL did not explain the variation in yield better. The results in relation to the potential of using component analysis in studying complex crop traits are discussed.     

大豆锈病初次侵染源调查及其作用分析

本调查基本确定了大豆锈病（Phakop-sora pachyrhiza syd）在南方的越冬范围为北纬23°55’以南；经综合分析锈病发生时期、锈病专性寄生性和气流传播特性、栽培葛、野生葛和大豆种植时期、生长季节、锈病发生实况与接种鉴定结果，基本确定南方的栽培葛（Pueraria lobata ohwi）和野葛（P．lobata（wild）ohwi）是大豆锈病病原菌的越冬寄主，其上发生的锈病是本地大豆锈病的主要初次侵染源之一；该区域发生的病原茵成为向北传播扩散的起始源；为今后大豆锈病的监测、预测预报与治理提供了可靠的依据。     

Mixotrophy in a Local Strain of Nannochloropsis granulata for Renewable High-Value Biomass Production on the West Coast of Sweden

A local strain of Nannochloropsis granulata (Ng) has been reported as the most productive microalgal strain in terms of both biomass yield and lipid content when cultivated in photobioreactors that simulate the light and temperature conditions during the summer on the west coast of Sweden. To further increase the biomass and the biotechnological potential of this strain in these conditions, mixotrophic growth (i.e., the simultaneous use of photosynthesis and respiration) with glycerol as an external carbon source was investigated in this study and compared with phototrophic growth that made use of air enriched with 1–2% CO₂. The addition of either glycerol or CO₂-enriched air stimulated the growth of Ng and theproduction of high-value long-chain polyunsaturated fatty acids (EPA) as well as the carotenoid canthaxanthin. Bioassays in human prostate cell lines indicated the highest antitumoral activity for Ng extracts and fractions from mixotrophic conditions. Metabolomics detected betaine lipids specifically in the bioactive fractions, suggesting their involvement in the observed antitumoral effect. Genes related to autophagy were found to be upregulated by the most bioactive fraction, suggesting a possible therapeutic target against prostate cancer progression. Taken together, our results suggest that the local Ng strain can be cultivated mixotrophically in summer conditions on the west coast of Sweden for the production of high-value biomass containing antiproliferative compounds, carotenoids, and EPA.     

Genetic gains in grain yield, net photosynthesis and stomatal conductance achieved in Henan Province of China between 1981 and 2008

Knowledge of the changes in agronomic and photosynthetic traits associated with genetic gains in grain yield potential is essential for an improved understanding of yield-limiting factors and for determining future breeding strategies. The objectives of this study were to identify agronomic and photosynthetic traits associated with genetic gains in grain yield of facultative wheat (Triticum aestivum L.) between 1981 and 2008 in Henan Province, the most important wheat producing area in China. During the 2006-2007 and 2007-2008 crop seasons, a yield potential trial comprising 18 leading and new cultivars released between 1981 and 2008 was conducted at two locations, using a completely randomised block design of three replicates. Results showed that average annual genetic gain in grain yield was 0.60% or 51.30 kg ha⁻¹ yr⁻¹, and the significant genetic improvement in grain yield was directly attributed to increased thousand grain weight which also contributed to the significant increase in harvest index. The genetic gains in rates of net photosynthesis at 10, 20 and 30 days after anthesis were 1.10% (R² = 0.46, P < 0.01), 0.68% (R² = 0.31, P < 0.05) and 6.77% (R² = 0.34, P < 0.05), respectively. The rates of net photosynthesis at 10 (r = 0.58, P < 0.05), 20 (r = 0.59, P < 0.05) and 30 (r = 0.65, P < 0.01) days after anthesis were closely and positively correlated with grain yield. A slight decrease in leaf temperature and an increase in stomatal conductance after anthesis were also observed. Grain yield was closely and positively associated with stomatal conductance (r = 0.69, P < 0.01) and transpiration rate (r = 0.63, P < 0.01) at 30 days after anthesis. Therefore, improvement of those traits was the likely basis of increasing grain yield in Henan Province between 1981 and 2008. The genetic improvement in yield was primarily attributed to the utilization of two elite parents Yumai 2 and Zhou 8425B. The future challenge of wheat breeding in this region is to maintain the genetic gain in grain yield and to improve grain quality, without increasing inputs for the wheat-maize double cropping system.     

Giant piezoelectricity on Si for hyperactive MEMS

Microelectromechanical systems (MEMS) incorporating active piezoelectric layers offer integrated actuation, sensing, and transduction. The broad implementation of such active MEMS has long been constrained by the inability to integrate materials with giant piezoelectric response, such as Pb(Mg(1/3)Nb(2/3))O(3)-PbTiO(3) (PMN-PT). We synthesized high-quality PMN-PT epitaxial thin films on vicinal (001) Si wafers with the use of an epitaxial (001) SrTiO(3) template layer with superior piezoelectric coefficients (e(31,f) = -27 ± 3 coulombs per square meter) and figures of merit for piezoelectric energy-harvesting systems. We have incorporated these heterostructures into microcantilevers that are actuated with extremely low drive voltage due to thin-film piezoelectric properties that rival bulk PMN-PT single crystals. These epitaxial heterostructures exhibit very large electromechanical coupling for ultrasound medical imaging, microfluidic control, mechanical sensing, and energy harvesting.