The effect of alternating temperature on the rest break process of male flowers of Cryptomeria japonica D. Don

In order to develop a model for predicting the period of male flower anthesis in Cryptomeria japonica, it is requisite to clarify the rest break process in male flowers. In this study, the effect of alternating temperatures in a daily cycle on rest break was investigated using twigs bearing male flowers from three clones of C. japonica. Four temperature treatments with the same daily mean of 8°C were applied to sample twigs over a period of 35 days: (1) 8°C constant (TR-A); (2) 7°–10°C alternating (TR-B); (3) 5.5°–13°C alternating (TR-C); and (4) 4°–16°C alternating (TR-D). After treatment, the sample twigs were forced to bloom at a constant temperature of 16°C, and the cumulative effective temperatures (CETs) required for anthesis were compared. While the CETs for anthesis were the same for TR-A and TR-B, that for TR-C was significantly higher. After TR-D, almost no male flower bloomed, indicating that this treatment was ineffective in breaking rest. When considering these results on an hour basis, it was a reasonable interpretation that 13°C had no effect on breaking rest while the temperatures below 10°C were all equally effective. On the other hand, temperatures of 16°C or above were considered to have an antagonizing effect that cancels the effects of chilling temperatures below 10°C. These results suggest that the effects of high temperatures during the daytime in chilling periods should be properly incorporated into a model of the process by which rest of male flowers is broken.     

Performance of coated carbide tools when grooving wood-based materials: effect of work materials and coating materials on the wear resistance of coated carbide tools

This paper presents the performance of coated carbide tools when grooving various density hardboards and wood-chip cement boards. Work materials of low density (about 0.8g/cm³) and high density (about 1.2g/cm³) were tested. The coating materials studied were chromium carbide, titanium carbonitride, and titanium carbide, which were synthesized on P30 carbide substrate using a chemical vapor deposition method; titanium nitride, chromium nitride, and titanium carbonitride were synthesized using the physical vapor deposition method. Cutting tests were performed during grooving at a cutting speed of 1000m/min and a feed rate of 0.1 mm/rev. The results of the study show that the coated carbide tools are more advantageous in reducing the progression of tool wear and retaining lower normal force and noise level when cutting both hardboard and wood-chip cement board of high density than was the uncoated carbide tool. The wear rate of the coated carbide tools for the wood-chip cement board increased more rapidly than that of the hardboard with increasing densities. Though the coated carbide tools suffered more wear with the low-density wood-chip cement board than with hardboard, their normal force and noise level were always lower for the low-density wood-chip cement board.Part of this paper was presented at the 11th Annual Meeting of the Chugoku Shikoku branch of the Japan Wood Research Society, Matsue, Shimane, September 25, 1999     

Effects of chemical treatments on ultra-high-yield pulping 1. Fiber separation

Summary Specially designed wood blocks from Norway spruce were used to study the nature of the fracture surfaces developed in shear using a tensile tester. In the case of the control (water-soaked blocks), the fracture in the latewood takes place mainly in the S₁ layer while in the earlywood the fracture occurs across the double cell wall. After dilute alkali treatment, some earlywood cells also fracture in the S₁ layer. For sulfite-treated samples, on the other hand, both earlywood and latewood fracture in the middle lamella.Financial support from the Empire State Paper Research Associates (ESPRA) is greatly appreciated     

Change in river water chemistry as affected by the confluence of forest drainage water in dairy farming area on Hokkaido Island, Northern Japan

We evaluated i) the difference in river water chemistry between a watershed mainly consisting of pasture and a watershed mainly consisting of forest, and ii) how the chemistry of river draining the pasture is influenced by that of the river draining the forest. We selected one river (designated as the T-river) draining the pasture (3,587 ha), and two rivers draining a forest (738 and 879 ha) in eastern Hokkaido, northern Japan. During higher river flow due to precipitation and thawing, the concentrations of NO ₃ ⁻ , SO ₄ ²⁻ , K⁺, Fe, and Al increased, suggesting the relative importance of the shallow soil layer as their source. On the other hand, Na⁺, Mg²⁺, Ca²⁺, and Si decreased, suggesting the relative importance of the source in a deep soil layer. The concentrations of NO ₃ ⁻ , Cl⁻, SO ₄ ²⁻ , K⁺, Na⁺, Mg²⁺, Ca²⁺, and Fe were higher in the T-river than in the forest drainage waters, suggesting the contribution of the excretion components from the milk cows. The Si concentration exhibited the opposite pattern. The concentrations of NO ₃ ⁻ , Cl⁻, SO ₄ ²⁻ , K⁺, Na⁺, Mg²⁺, Ca²⁺ (p<0.001), and Fe (p<0.05) in the T-river decreased after the confluence of the forest drainage waters, while Si concentration increased (p<0.001). The reason for the change in river chemistry was the confluence of the forest drainage waters. These findings suggested the environmental role of the forest in the dilution of the polluted river. Prof. S. Ohata, and Prof. H. Takeda, Graduate School of Agriculture, Kyoto University, facilitated this study. Prof. T. Sakai, Graduate School of Informatics, Kyoto University, offered this study some convenience. Dr. M. Sakimoto, and Dr. M. Katsuyama, Graduate School of Agriculture, Kyoto University, offered useful advise.     

Volatile organic compounds from wood and their influences on museum artifact materials II: Inference of causal substances of deterioration based on intercomparison of laser Raman spectra of deteriorated products

Volatile organic compounds (VOCs) from wood and their effects on artifacts are of intense interest to museum staff who must strictly manage the preservation environment. In this study, the causal substances of deterioration were inferred by comparison with laser Raman (LR) spectra of deterioration products. The artifact samples were deteriorated using VOCs from woods (WV test), and using specific substances that occur in wood VOCs (SV test). The deteriorated samples were analyzed by LR spectroscopy and the results of the WV and SV tests were compared. Hinokitiol and acetic acid were found to be two of the main causal substances of deterioration in western red cedar. Deterioration of iron and copper by spruce did not appear to be caused by acetic acid, as is generally assumed, but by some other unknown compound(s). Sensitivity to wood-based VOC components depended on the type of artifact. In western red cedar, mitsudasou (litharge) was very sensitive to acetic acid, while other artifacts were sensitive to hinokitiol. The LR method used in this study is very useful for the inference of causal substances of deterioration based on the detection of small amounts of deteriorated products such as those generated by deterioration due to wood VOCs. Part of this article was presented at the 25th Annual Meeting of the Japan Society for the Conservation of Cultural Property, Kyoto, June 2003     

Estimation of the fine root biomass in a Japanese cedar (Cryptomeria japonica) plantation using minirhizotrons

We estimated fine root biomass in a Japanese cedar (Cryptomeria japonica) plantation using a min-irhizotron technique. Since data obtained from minirhizo-trons are limited to the length and diameter of fine roots observed on minirhizotron tubes, data conversion is necessary to determine the fine root biomass per unit soil volume or unit stand area. We first examined the regression between diameter squared and weight per unit length of fine roots in soil core samples, and calculated the fine root biomass on minirhizotron tubes from their length and diameter. Then we determined conversion factors based on the ratio of the fine root biomass in soil core samples to that on minirhizotron tubes. We examined calculation methods, using a single conversion factor for total fine root biomass in the soil for depths of 0–40cm (Cal1), or using four conversion factors for fine roots in the soil at 10-cm intervals (Cal2). Cal1 overestimated fine root biomass in the lower soil or underestimated that in the upper soil, while fine root biomass calculated using Cal2 better matched that in soil core samples. These results suggest that minirhizotron data should be converted separately for different soil depths to better estimate fine root biomass.     

Abrasive wear properties of compressed sugi wood

We examined the abrasive wear properties and the effect of abrasive grain size on the rate of wear when sugi wood (Cryptomeria japonica D.Don), compressed to various densities, was rubbed with abrasive paper. The results showed that the wear resistance of compressed wood increased linearly with the increased compression ratio; and under the condition of a low compression ratio it tended to be higher in comparison with the strength of compressed wood. The critical grain size effect, which can be witnessed during the abrasive wear of metals and plastics, was seen when low pressure was applied to the abrasive material. At higher pressures, the wear rate of the compressed wood increased with grain size, but the critical grain size effect was not observed. The pressure required to create the critical grain size effect was found to be higher than that needed for other types of uncompressed wood with the same yield properties.Part of this report was presented at the 50th Annual Meeting of the Japan Wood Research Society, Kyoto, April 2000     

Nitrification Inhibitors from the root tissues of Brachiaria humidicola, a tropical grass

Nitrification inhibitory activity was found in root tissue extracts of Brachiaria humidicola, a tropical pasture grass. Two active inhibitory compounds were isolated by activity-guided fractionation, using recombinant Nitrosomonas europaea containing luxAB genes derived from the bioluminescent marine gram-negative bacterium Vibrio harveyi. The compounds were identified as methyl-p-coumarate and methyl ferulate, respectively. Their nitrification inhibitory properties were confirmed in chemically synthesized preparations of each. The IC50 values of chemically synthesized preparations were 19.5 and 4.4 microM, respectively. The ethyl, propyl, and butyl esters of p-coumaric and ferulic acids inhibited nitrification, whereas the free acid forms did not show inhibitory activity.     

Persorption of luminal antigenic molecule and its specific antibody via apoptotic epithelial cells of intestinal villi and Peyer's patches into peripheral blood in rats

The possibility of persorption of bovine serum albumin (BSA) molecules from mucous epithelial cells and its mechanism were investigated in rats orally pre-immunized by BSA for 14 consecutive days. In the small and large intestines, both the BSA antigen (BSA-Ag) and its specific antibody (SpAb) were absorbed by the epithelial cells at the late apoptotic stage (ApoEp), and were subsequently transcytosed by membranes of the small vesicles. The basal cytoplasms containing highly-concentrated BSA-Ag and SpAb were occasionally fragmented into small cytoplasmic droplets that were secreted into the lamina propria. In Peyer's patches, both BSA-Ag and SpAb were more actively absorbed and transcytosed toward the dome area by the ApoEp of the dome apex than by the M cells. BSA-Ag and SpAb were finally persorbed into the portal blood and lymph, but were never secreted into the bile. They were also engulfed by macrophage-like cells in the villous lamina propria, mesenteric lymph node and spleen, and by hepatocytes in the liver. These findings suggest that sensitized soluble luminal antigens are taken up by ApoEp in the small intestine and are finally persorbed into the peripheral blood. The uptake of luminal antigen might be mediated by its luminal SpAb.     

Killing of feline T-lymphocytes by gamma-rays and energetic carbon ions

High linear energy transfer (LET) heavy charged particles have previously been applied clinically to human cancer radiotherapy because of their excellent physical properties of selective dose distribution and higher relative biological effectiveness (RBE) for human; however, such an approach has yet to be applied to cat patients. The present study investigates the biological effectiveness of low-LET gamma-rays (0.2 keV/micro m) compared to high-LET carbon ions (114 keV/micro m) in feline T- lymphocyte FeT-J cells. Clonogenic survival analysis revealed that the RBE value of carbon ions was 2.98 relative to a 10% survival dose (D(10)) by gamma-rays, and that the inactivation cross-section in cells exposed to gamma-rays and carbon ions was 0.023 and 38.9 micro m(2), respectively. Terminal deoxynucleotidyl transferase (TdT)-mediated dUTP-biotin nick end labeling (TUNEL) analysis revealed that TUNEL-positive frequency in carbon-irradiation cells is higher than for gamma-irradiated cells against exposure to the same physical doses, but that very little difference in TUNEL-positive frequency is observed between cells exposed to the respective D(10) dose of gamma-rays. Our data thus indicate that carbon ions are more effective for cell killing than gamma-rays at the same physical doses, but kill cells to an extent that is comparable to gamma-rays at the same biological doses. Carbon ion radiotherapy is therefore a promising modality for cat patients.