ROOT ZONE TEMPERATURE INFLUENCES ZINC REQUIREMENT OF MAIZE CULTIVARS ON A CALCAREOUS LOAM SOIL

The zinc (Zn) requirement of a maize (Zea mays L.) hybrid (‘FHY-396’) and an indigenous variety (‘EV-7004’) was measured at low (22.4 ± 5°C) and high (28.8 ± 5°C) root-zone temperatures (RZT). Four Zn rates (0, 3, 9 and 27 mg kg^?1 soil) were applied to a calcareous loam soil in pots for the glasshouse study. Shoot and root dry matter yields were significantly more at the higher RZT. Regardless the RZT, maximum relative shoot dry matter yield in hybrid and variety was produced, respectively, at 9 and 3 mg Zn kg^?1 soil. Zinc concentration in roots and shoots of both the cultivars increased with Zn rates and it was significantly more at the higher RZT. Cultivars differed in critical Zn concentration (C_ZnC) required for maximum shoot dry matter yield. The C_ZnC ranged from 25 to 39 μg Zn g^?1 plant tissue for optimum growth of both the cultivars at low and high RZT.     

Lead Toxicity in Cereals and Its Management Strategies: a Critical Review

Cereal grains such as wheat, rice, and maize are widely consumed as a staple food worldwide. Lead (Pb) is one of the non-essential trace elements and its toxicity in crops especially cereals is a widespread problem. The present review highlighted Pb toxicity in cereal and management strategies to reduce its uptake in plants. Lead toxicity reduced the cereal growth, photosynthesis, nutritional value, yield, and grain quality. The response of cereals to excess varies with plant species, levels of Pb in soil, and growth conditions. Reducing Pb bioavailability in the soil is a viable approach due to its non-degradability either by microbes, chemicals, or other means. Cultivation of low Pb-accumulating cultivars may reduce the risk of Pb toxicity in plants and humans via the food chain. Use of plant growth regulators, microbes, organic, and inorganic amendments might be promising techniques for further decreasing Pb contents in shoot and grains. Soil amendments along with selecting low Pb-accumulating cultivars might be a feasible approach to get cereal grains with low Pb concentrations. Furthermore, most of the studies have been conducted under controlled conditions either in hydroponic or pots and less is known about the effects of Pb management approaches under ambient field conditions.     

Soil available potassium affected by rice straw incorporation and potassium fertilizer application under a rice–oilseed rape rotation system

Data from 147 field trials were collected to study the influence of straw incorporation on soil potassium (K) under an intensive rice–oilseed rape rotation system, while pot experiments were conducted to evaluate the effects of rice straw incorporation on soil K availability. A significant correlation was observed between the soil available K and the relative yield (RRY) and the relative K uptake (RKU) of oilseed rape, with R² values ranging from 0.07 to 0.08 and from 0.10 to 0.11, respectively, when data were fitted to a logarithmic equation model. In approximately 30% of trials, RRY reached 90%, while soil test available K values were below the critical limit, indicating that soil K values at the time of sampling (within 1 week of rice harvest) underestimated the actual soil K supply capacity. The pot experiment results showed that soil available K was affected by straw incorporation and soil type in the fallow period. The NH₄OAc‐K and NaBPh₄‐K concentrations of soils increased at first, and then, plateaued after 28 days. Straw incorporation significantly influenced the critical soil K concentration, which is important for making accurate K fertilizer recommendation. These results suggested that straw K should be seriously considered in making K fertilizer recommendations. Extending the sampling time from 1 to 3 weeks after the harvesting of rice to stabilize the effects of straw incorporation may help achieve a more accurate evaluation of soil available K.     

Site-Specific Nitrogen Management in Rice Using Remote Sensing and Geostatistics

Proper doses of nitrogenous fertilizer are most important for rice production system because a large part of the nitrogen may be lost if it is not applied judiciously. A study was conducted covering five blocks of Balasore and two blocks of Bhadrak districts. Soil samples were collected randomly, and field visit was conducted during peak vegetative stage of rice. Two approaches have been used in this study for estimating the site-specific nitrogen (N) requirement in the study area. In one approach, geostatisical analysis and kriging was used to develop the soil test–based N recommendation map by which a minimum of 72 kg N ha^?1 and maximum of 94 kg N ha^?1 were recommended. In a second approach, remote sensing was used and N recommendation map was developed using the moderate-resolution imaging spectroradiometer (MODIS) leaf area index (LAI) and normalized difference vegetation index (NDVI) satellite data, and a minimum requirement of 60 kg N ha^?1 and maximum of 120 kg N ha^?1 was estimated through this approach.     

Efficiency of rice bran for the removal of selected organics from water: kinetic and thermodynamic investigations

The sorption efficiency of indigenous rice (Oryza sativa) bran for the removal of organics, that is, benzene, toluene, ethylbenzene, and cumene (BTEC), from aqueous solutions has been studied. The sorption of BTEC by rice bran is observed over a wide pH range of 1-10, indicating its high applicability to remove these organics from various industrial effluents. Rice bran effectively adsorbs BTEC of 10 microg mL(-1) sorbate concentration from water at temperatures of 283-323 +/- 2 K. The effect of pH, agitation time between solid and liquid phases, sorbent dose, its particle size, and temperature on the sorption of BTEC onto rice bran has been studied. The pore area and average pore diameter of rice bran by BET method are found to be 19 +/- 0.7 m(2) g(-1) and 52.8 +/- 1.3 nm. The rice bran exhibits appreciable sorption of the order of 85 +/- 3.5, 91 +/- 1.8, 94 +/- 1.4, and 96 +/- 1.2% for 10 microg mL(-1) concentration of benzene, toluene, ethylbenzene, and cumene, respectively, in 60 min of agitation time using 0.1 g of rice bran at pH 6 and 303 K. The sorption data follow Freundlich, Langmuir, and Dubinin-Radushkevich (D-R) models. Sorption capacities have been computed for BTEC by Freundlich (32 +/- 3, 61 +/- 14, 123 +/- 28, and 142 +/- 37 m mol g(-1)), Langmuir (6.6 +/- 0.1, 7.5 +/- 0.13, 9.5 +/- 0.22, and 9.4 +/- 0.18 m mol g(-1)), and D-R isotherms (11 +/- 0.5, 16 +/- 1.3, 30 +/- 2.2, and 33 +/- 2.5 m mol g(-1)), respectively. The Lagergren equation is employed for the kinetics of the sorption of BTEC onto rice bran and first-order rate constants (0.03 +/- 0.002, 0.04 +/- 0.003, 0.04 +/- 0.003, and 0.05 +/- 0.004 min(-1)) have been computed for BTEC at their concentration of 100 mug mL(-1) at 303 K. Studies on the variation of sorption with temperatures (283-323 K) at 100 mug mL(-1) sorbate concentration gave thermodynamic constants DeltaH (kJ mol(-1)), DeltaG (kJ mol(-1)), and DeltaS (J mol(-1) K(-1)). The results indicate that the sorption of organics onto rice bran is exothermic and spontaneous in nature under the optimized experimental conditions selected. This sorbent has been used successfully to accumulate and then to determine benzene, toluene, and ethylbenzene in wastewater sample.     

Effect of calcareous and siliceous amendments on N2O emissions of a grassland soil

Liming of acidic agricultural soils has been proposed as a strategy to mitigate nitrous oxide (N₂O) emissions, as increased soil pH reduces the N₂O/N₂ product ratio of denitrification. The capacity of different calcareous (calcite and dolomite) and siliceous minerals to increase soil pH and reduce N₂O emissions was assessed in a 2-year grassland field experiment. An associated pot experiment was conducted using homogenized field soils for controlling spatial soil variability. Nitrous oxide emissions were highly episodic with emission peaks in response to freezing–thawing and application of NPK fertilizer. Liming with dolomite caused a pH increase from 5.1 to 6.2 and reduced N₂O emissions by 30% and 60% after application of NPK fertilizer and freezing–thawing events, respectively. Over the course of the 2-year field trial, N₂O emissions were significantly lower in dolomite-limed than non-limed soil (p < .05), although this effect was variable over time. Unexpectedly, no significant reduction of N₂O emission was found in the calcite treatment, despite the largest pH increase in all tested minerals. We tentatively attribute this to increased N₂O production by overall increase in nitrogen turnover rates (both nitrification and denitrification) following rapid pH increase in the first year after liming. Siliceous materials showed little pH effect and had no significant effect on N₂O emissions probably because of their lower buffering capacity and lower cation content. In the pot experiment using soils taken from the field plots 3 years after liming and exposing them to natural freezing–thawing, both calcite (p < .01) and dolomite (p < .05) significantly reduced cumulative N₂O emission by 50% and 30%, respectively, relative to the non-limed control. These results demonstrate that the overall effect of liming is to reduce N₂O emission, although high lime doses may lead to a transiently enhanced emission.     

Variation in rate of phenological development and morphology between red clover varieties: Implications for clover proportion and feed quality in mixed swards

Red clover (Trifolium pratense) grown in mixtures with grasses often constitutes a lower proportion of total yield in spring than in summer growth. A more even red clover proportion between the harvests would benefit forage quality and management at feeding. We investigated whether inclusion of early versus late‐maturing red clover varieties could reduce this disproportionality. In a two‐year field trial harvested three times per season, each of six red clover varieties was grown in two grass mixtures. Rate of phenological development did not differ during spring growth, but did so in regrowth after first and second cuts. Here, the earliest varieties constituted the highest proportion. At all harvests, the early varieties had lower crude protein concentrations and a higher content of neutral detergent fibre (NDF) and indigestible NDF than the late varieties. Clover proportion was higher in swards with a mixture of timothy and meadow fescue than in swards with perennial ryegrass during the first year and lower in the second year. It is concluded that developmental rate should be explored further as a key character for red clover competiveness in spring growth of rapidly elongating grasses.     

Synthesis and Characterization of Aqueous Chitosan-polyurethanes Dispersion for Textile Applications with Multipurpose Performance Profile

As the use of high performance textiles has grown, the need for chemical finishes to provide the fabric properties required in the special applications has grown accordingly. In this project, a series of water dispersible polyurethanes dispersion (CS-PUs) with multipurpose performance profile was developed using isophorone diisocyanate (IPDI), polyethylene glycol (PEG), 2,2-dimethylol propionic acid (DMPA) and chitosan (CS) for textile applications. In two step synthesis process, NCO functional PU prepolymers prepared by reacting IPDI, PEG, and DMPA were extended with varying molar quantities of chitosan followed by structural characterization through FTIR. The prepared CS-PU dispersions were applied onto the dyed and printed poly-cotton blend fabrics. The performance behavior of the treated fabric in terms of crease recovery, tear strength, tensile strength, and antibacterial properties was evaluated by applying standard test methods. These investigations show that the CS-PU dispersions can be applied as antibacterial textile finishes with significant improvement in the physical and mechanical properties of poly-cotton fabrics.     

Concentration of selected heavy metals in spices,dry fruits and plant nuts

Different spices, dry fruits and plant nuts commonly consumed in Pakistan were assayed for the heavy metals cadmium, lead, copper, zinc, iron and manganese by the potentiometric stripping analysis and AA spectrophotometry. The results revealed wide variation in heavy metal content among different biological materials. Mixed spices generally exhibited higher value for trace metals specially lead (6.6–9.2 µg/g), cadmium (0.65–1.34 µg/g), iron (142.3–285.0 µg/g) and zinc (64.2–65.8 µg/g). Dry fruits contained relatively lesser amounts of heavy metals than plant nuts. Almonds contained higher levels of lead (1.02 µg/g) and cadmium (0.24 µg/g) than other nuts and dry fruits.