Effects of magnetized water on the distribution pattern of soil water with respect to time in trickle irrigation

In arid and semi‐arid regions, farmers use low quality groundwater because of limited availability of high quality irrigation water; instead, magnetized water can be used for irrigation given its better quality. Magnetized water is obtained by passing water through permanent magnets or through electro‐magnets installed in or on a feeding pipeline. This study at the Gorgan Agricultural and Natural Resources Research Center, Gorgan province, Iran, investigated soil moisture distribution from trickle irrigation. Treatments were magnetic and non‐magnetic water and sub‐treatments involved the addition of 200 mg/L calcium carbonate and 400 mg/L calcium carbonate with well water providing the control. The experiment was laid out with a complete randomized block design with three replications. Soil moisture around the drippers was measured for 1, 2 and 3 days after irrigation during the 3‐month irrigation period. The results show that the differences in soil moisture for days 1, 2 and 3 after irrigation with magnetized irrigation water were lesser than those for the non‐magnetized irrigation water treatments. Irrigation with magnetized irrigation water caused higher soil moisture compared with the non‐magnetized irrigation water for different irrigation water salinities. The use of magnetized water for irrigation is recommended to improve irrigation efficiency.     

Assessment of soil erodibility and aggregate stability for different parts of a forest road

We measured erodibility and mean weight diameter （MWD） of soil aggregates in different parts of a forest road. Samples of topsoil were collected from cutslope, fillslope, road surface and forest ground to assess the texture, bulk density, moisture, CaCO3 and organic matter. Soil aggregate stability was determined by wet sieving. Soil erodibility on the road surface was 2.3 and 1.3 times higher than on the fillslope and cutslope, respectively. The forest soil had the lowest erodibility. Aggregate stability of cutslope and road surface were low and very low, respectively. There was a significant negative relationship between cutslope erodibility with CaCO3 and sand content. Cutslope erodibility increased with increasing silt, clay and moisture content. On fillslopes, MWD increased with in-creasing rock fragment cover, plant cover, litter cover, organic matter and sand. There was a strong negative correlation between fillslope erodibility and organic matter, sand and MWD. There was no significant difference between erodibility of bare soil and soils beneathRubus hyrcanusL. and Philonotis marchica （Hedw.） Brid.     

Comparative performance of the cotton bollworm,Helicoverpa armigera (Hübner) (Lepidoptera: Noctuidae) on various host plants

The effect of various host plants; chickpea (varieties Arman, Hashem, Azad and Binivich), bean varieties (Phaseolus vulgaris L.), common bean (Khomein), white kidney bean (Dehghan), red kidney bean (Goli), cowpea (variety Mashhad) and tomato (variety Meshkin) on the life table parameters of the cotton bollworm, Helicoverpa armigera (Hübner) were evaluated under laboratory conditions (25 ± 1 °C, 65 ± 5 % RH and a 16:8 h light:dark photoperiod). Records for larval period, pupal period, and development time of H. armigera were longest on tomato (24.9, 15.1, and 45.4 days, respectively) and shortest on chickpea Arman (17.5, 9.1, and 31.7 days, respectively). Among various host plants fecundity (total number of eggs laid per female) was highest (2,665 eggs) on chickpea Arman and the lowest (700 eggs) on tomato. The net reproductive rate (R ₀) was significantly affected by various host plants being highest on chickpea Arman (1,422) and lowest on tomato (111.3 females/female/generation). The highest and lowest intrinsic rates of natural increase (r _m) were observed on chickpea Arman (0.244 day^?1) and tomato (0.123 day^?1) varieties, respectively. Cluster analysis of the life table parameters of H. armigera on various host plants indicated that tomato, in comparison to other plants was an unsuitable host to H. armigera.     

The lumbosacral Plexus of the Barn Owl (tyto alba): Formation,branches and distribution

The aim of the present study is to reveal the anatomical structure of lumbosacral plexus of barn owl. Six barn owls were included in the study. Nerves originating from plexus were dissected individually, and findings of innervation areas of nerves were determined. Lumbosacral plexus of barn owl was observed to be formed by ventral rami of ten synsacral spinal nerves. It was found that while the r. cutaneus femoris lateralis, the n. obturatorius, the n. coxalis cranialis, the r. cutaneus femoris medialis, the n. cutaneus femoris cranialis and the n. femoralis originated from the lumbar plexus, the n. isciofemoralis, the n. cutaneus femoris caudalis, the n. coxalis caudalis and the n. ischiadicus originated from the sacral plexus. Consequently, when the results of the study were compared with information of different avian species, it was observed that differences focused on the formation of the lumbar and sacral plexuses and innervation level of digits.     

Assessment of some soil thermal conductivity models via variations in temperature and bulk density at low moisture range

Simulation of heat transfer in soil under steady and unsteady situations requires reliable estimate of soil thermal conductivity (λ) at varying environmental conditions. In the current work several soil thermal conductivity predicting models including I) de Vries, II) Campbell, III) combined de Vries and Campbell and IV) de Vries-Nobre were evaluated for the four soils of coarse sand, sandy loam, loam and clay loam textured at varying in temperature and bulk density at low moisture range. Thermal conductivities measured by the cylindrical probe method served as the reference for models assessment. Results showed that approximately same thermal conductivities obtained by the five methods at low moisture range (θ ≤ 0.05 m³/m³). Also the de Vries and de Vries-Campbell models produced accurate than Campbell and de vries-Nobre models. The accuracy of the two models increased with soil compaction but decreased with temperature rise. Campbell model showed more reliability at higher (311.16 and 321.16 K) temperatures; but its accuracy declined with soil compaction in current work. It seems that assuming needle shape for the soil particles is far away from the reality whereas assuming spherical shapes may be more realistic and produced more satisfactory prediction of thermal conductivity. The compaction would alter particle arrangement and may increase the contact area of particles; and then make them behave more or less spherical shape.it seems thermal conductivity in solid particles increase via increasing in temperature. Since a modified mineral shape factor, g_m, was developed as a combination between sphere and needle according to geometric mean particle diameter as well as bulk density and temperature as modifying factors. This factor increased the accuracy of de Vries-Nobre model up to 10.37%. Regarding nonlinear regression model, moisture content, bulk density, temperature and quartz content demonstrated significant effect on soil thermal conductivity in our investigation.     

Bacterial susceptibility to and chemical composition of essential oils from Thymus kotschyanus and Thymus persicus

Susceptibility of Escherichia coli, Staphylococcus aureus, Bacillus subtilis, Klebsiella pneumonia, and Pseudomonas aeroginosa to the essential oils extracted from two varieties of Thyme, i.e., Thymus kotschyanus Boiss. and Hohen. and Thymus persicus L. at preflowering and flowering stages were studied. The disk diffusion method was used to evaluate the zone of microbial growth inhibition at various concentrations of the oils. Minimal inhibitory concentration and minimal bactericidal concentration of the oils were determined and compared with each other. The oils from the above plants were found to be strongly bactericidal with that of T. kotschyanus being more effective. T. kotschyanusand T. persicus oils analyzed by gas chromatography (GC) and GC/mass spectrometry (MS) lead to identification of 33 and 26 components, respectively. The profile of the oil components from T. persicuswas similar to that of T. kotschyanus in almost all of the compounds but at different concentrations. The major components of T. kotschyanus oil before and at the flowering stages were carvacrol (35.06, 22.75%), thymol (26.60, 16.52%), gamma-terpinene (7.81, 0.34%), gamma-terpinene (4.34, 0%), borneol (2.29, 4.52%), myrcene (0.26, 12.65%), thymolquinone (0, 11.39%), nerol (0, 6.10%), and beta-caryophyllene (0, 5.54%), respectively, and those of T. persicus at the same stages were carvacrol (38.96, 27.07%), thymol (6.48, 11.86%), P-cymene (7.51, 10.16%), gamma-terpineol (0, 9.51%), nerol (15.66, 9.41%), gamma-terpinene (6.11, 6.51%), and thymol acetate (5.29, 5.30%), respectively. The contribution of oil components to its antibacterial property is discussed. High aromatic compound content of the phenol-rich oils seems to account for strong antibacterial activity.     

Assessment for salinity tolerance through intergeneric hybridisation: Triticum durum × Aegilops speltoides

Summary Triploid hybrid embryos (AABB × SS = ABS) were produced by crossing two moderately salt-tolerant wheats, namely Triticum turgidum durum and Aegilops speltoides subsp. speltoides. The embryos were rescued by culturing on agar No. 1. Chromosome doubling was achieved by using 0.05% colchicine. The resulting hexaploid plants grew to maturity, and produced a considerable amount of seed (≈40,000). The synthetic hexaploid (C₂) was tested for salinity tolerance, grown at 0, 100, 125, 150, 160, 170, 180 and 200 mM NaCl in a standard nutrient solution for 2 weeks. The criterion of salt tolerance was root growth in different NaCl concentrations. The amphidiploid material showed greater salinity tolerance than either parent, suggesting the presence of different genes for tolerance in the parents.     

Parasitic fauna of farmed freshwater ornamental fish in the northwest of Iran

Ornamental fish farming is globally a key sector of aquaculture. The purpose of this study was to report on the parasitic fauna of ornamental fish from seven farms in the East Azerbaijan province in northwestern Iran. Between November 2020 and February 2021, a total of 600 freshwater ornamental fish of six species, including goldfish (Carassius auratus), angel (Pterophyllum scalare), guppy (Poecilia reticulata), dwarf gourami (Colisa lalia), swordtail (Xiphophorus helleri), and cichlid (Cichlasoma sp.) were collected for parasitological analysis. Six ciliate protozoan species (Trichodina mutabilis, Trichodina nobilis, Trichodina spp., Heteropolaria lwoffi, Ichthyophthrius multifiliis, and Chilodonella spp.), three species of monogenean trematodes (Dactylogyrus dulkeiti, Dactylogyrus spp. and Gyrodactylus spp.), two species of crustacean arthropods (Lernaea cyprinacea and Argulus japonicus), and a nematode (Capillaria spp.) were identified among the examined fish. Parasites were detected in the fish from 5 of 7 farms, with an overall parasitic prevalence in 26.33% (158/600) of the fish. Fish infection rates with protozoans, monogenean trematodes, crustacean arthropods, and nematodes were 16.83, 13.17, 4, and 0.33% respectively. The highest prevalence was found in X. helleri infected with Gyrodactylus spp. and P. scalare infested with Trichodina spp. Moreover, 9/100 and 10/100 of goldfish were infected with A. japonicus and L. cyprinacea, compared to 2/500 and 3/500, respectively, for all other species in combination, which is a statistically significant result (p?<?0.01). Assessment of farmed fish parasitic fauna is important to inhibit the spread of infections, ensure fish production and improve fish health.

     

Prevalence,phenotypic and genotypic diversity,antibiotic resistance,and frequency of virulence genes in Pseudomonas aeruginosa isolated from shrimps

Preventive measures should be prioritized for the increased growth of bacterial contamination in aquatic organisms. This study is aimed at molecular investigation of the prevalence of Pseudomonas aeruginosa, antibiotic resistance, and virulence factor encoding genes. After confirmation of P. aeruginosa collected from shrimp samples (in the same size) in Isfahan and Chabahar (Iran) in summer and autumn, antibiotic resistance encoding genes, virulence factor encoding genes, and multi-drug resistance (MDR) patterns were assessed. Bacterial contamination from Isfahan was higher than Chabahar despite having a cooler climate on summer days. Antibiotic resistance to piperacillin in fresh shrimp samples in summer in Isfahan was contrary to its usage as a front-line antibiotic agent. Lowered MDR pattern in frozen shrimp viability of bacteria was related to the varied expression of antibiotic resistance, highlighting the importance of regulations for cold chain in storage, transportation, and distribution of marine samples compared to fresh shrimps. Foodborne pathogens are of clinical and environmental importance. Results of our study indicated a high rate of frequency for P. aeruginosa isolated from marine samples. Maintenance of cold chain has indispensable roles in preservation, and reduction of P. aeruginosa frequency in aquatic organisms.