Screening of Iranian Potato Germplasm for Resistance to the Potato Tuberworm Phthorimaea operculella (Lepidoptera: Gelechiidae)

The potato tuberworm, Phthorimaea operculella (Zeller), is an important insect pest of potato, Solanum tuberosum L., both in storage and in the field. In this research, tubers of eight commercial potato cultivars and four Iranian selections with equal weight and dormancy were exposed to 10 pairs of adult P. operculella in a climate chamber set at 25?±?1 °C, 65?±?5 % RH and total darkness. In a free-choice situation, oviposition was lower on 397082–2, Khavaran and Morene compared to the other germplasm that were exposed to adults of P. operculella. Number of mines per tuber, length of mines per tuber, time of development of larvae, number of pre-pupae produced per tuber, weight of pre-pupae and number of eggs developed in ovaries per female were counted and/or measured on each commercial cultivar and selection. There were fewer and shorter mines on tubers of 397082–2, Khavaran and Morene compared to the other potato germplasm. The number of pre-pupae produced per tuber and the weight of pre-pupae were lower when P. operculella was reared on tubers of 397082–2, Khavaran and Morene. Also the development, survival and fecundity were lower when P. operculella was reared on those same germplasm. Flesh firmness was negatively correlated with larval survival (r ²?=?0.87); in addition, the percentage of starch and macronutrient composition was low on these three germplasm. Thus, tuber flesh firmness of these germplasm could delay larval penetration and lower establishment 397082–2, Khavaran and Morene showed promising traits that can be integral component of potato breeding for resistance to P. operculella and pest management programs.     

Incorporation of Functionalized Silica Nanoparticles into Polymeric Films for Enhancement of Water Absorption and Water Vapor Transition

Water absorption and water vapor transition are significant mechanisms in many industrial processes. Nanocomposite polymers are appropriate materials for water transition process due to their specific properties. The present work was aimed to enhance the water absorption and water vapor transition by high loading incorporation of silica nanoparticles (NPs) into polyacrylonitrile (PAN) and Pebax 1657 polymers. PAN was used to prepare both the nanocomposite films (NCFs) and support layers of nanocomposite membranes (NCMs). Pebax 1657 was used to fabricate the selective layers of NCMs. Incorporation of NPs into the NCFs were carried out using ex-situ and in-situ (sol-gel) methods. NCFs were fabricated by electrospinning and casting methods. The fabricated NCFs of fibers and polymers were examined through water absorption tests. For fabrication of NCMs, the electrospinning and dip-coating methodologies and the incorporation of NPs into the selective layers by in-situ method were used. Besides, the water vapor permeation tests have been designed and constructed to examine the NCMs for dehydration of methane gas. In order to provide efficient NPs dispersion into NCFs, the surface functionalization of silica NPs with ethylene glycol (EG) was also considered. The functionalized silica NPs were used in the fabrication of NCFs and into the selective layer of NCMs. It is found that in applying the ex-situ method, there is a lot of NPs agglomeration, while the dispersion quality of NPs is higher with the sol-gel method. In addition, the dispersion is improved greatly with functionalization of silica NPs. The water uptake ratio of electrospun mats is about 400 % higher than the cast layers for the same loadings of NPs. The water uptake ratio of the polymeric layers containing EG is about 50 % higher than the samples without EG. The permeance of water vapor for the NCM (15 wt.% of SiO₂/Pebax 1657) fabricated by sol-gel method was enhanced to 54.4 % higher than the membranes without NPs. Functionalization of silica NPs also enhanced the water vapor permeation process. For instance, the water vapor of the NCM containing 30 wt.% of EG/Pebax1657 was increased by 68.7 %.     

Motor disorders and impaired electrical power of pallidal EEG improved by gallic acid in animal model of Parkinson's disease

The aim of this study was evaluation the effect of Gallic acid on movement disorders and pallidal electrical power in animal model of Parkinson's Disease (PD). PD is clinically characterized by development of motor disturbances, such as bradykinesia, resting tremors, rigidity and a later loss ofpostural reflexes. Oxidative stress is a hallmark factor where the oxidation of dopamine generates Reactive Oxygen Species (ROS) and an unbalanced production ROS induces neuronal damage, therefor leading the neuronal death. Gallic Acid (GA) and its derivatives are present in the plant kingdom and acts as a potent antioxidant. Wistar male rats divided into seven groups randomly with 8 in each. Animals in all groups except control received 8 microg/2 microL 6-hydroxydopamine dissolved in normal saline contains 0.01% ascorbate or vehicle in right Medial Forbrain Bundle (MFB) and a bipolar wire electrode was implanted in the left globus pallidus nucleus of all animals under stereotaxic surgery. Two weeks later PD was approved by contralateral rotation signs induced by apomorphine and then movements and electrical power of pallidal were evaluated. Motor functions and pallidal electrical power were impaired and GA could improve motor dysfunctions and gamma wave power in parkinsonian rats' significantly with higher dose of GA (200 mg kg(-1)). Present result showed that GA may act as a potent antioxidant and free radical scavenger to reverse motor disorders and pallidal gamma wave power after 6-OHDA neurotoxicity in brain.     

Preparation and characterization of Ceftazidime loaded electrospun silk fibroin/gelatin mat for wound dressing

Fabrication of Ceftazidime (CTZ) loaded silk fibroin/gelatin (SF/GT) nanofibers (NFs) without the loss of structure and bioactivity of CTZ was demonstrated by electrospinning method. The structure, morphology and mechanical properties of the electrospun SF/GT nanofibrous mats were characterized using FT-IR, SEM and DSC. The drug release profile of different electrospun fibers was analyzed using spectrophotometric method, and also diffusion method was applied to assess the antibacterial effect of NFs. Cell viability was evaluated by MTT assay. The results show that the average diameter of drug loaded NFs at the optimum polymer to drug feeding ratio (10:1) was 276.55±35.8 nm, while increasing the feeding ratio to 1:1 increases the average diameter to 825.02±70.3 nm. FT-IR of drug loaded NFs was revealed that CTZ was successfully encapsulated into NFs while viability study approved cytocompatibility of SF/GT NFs. CTZ was released from NFs during 6 h, and formation of inhibition zone in diffusion test demonstrated the antibacterial effect of drug loaded NFs. Altogether, the CTZ loaded SF/GT NFs can improve the drug effectiveness particularly in the prevention of post-surgical adhesions and infections for wound dressing.     

Wicking phenomenon in polyacrylonitrile nanofiber yarn

The aim of this paper is to investigate vertical wicking in polyacrylonitrile (PAN) electrospinning nanofiber yarn using image analysis. Colored liquid rising phenomenon into the yarn and the distance of liquid rise were determined as a function of time. The kinetics of capillary rise follows the Lucas-Washburn equation. The results show that capillary rise rate coefficient is being reduced with increasing yarn twist, due to the reduction of continuity and size of capillaries. Increasing heat treatment stretch from 0 % (draw ratio=1) to 50 % (draw ratio=1.5) increases the capillary rise rate coefficient, due to the more homogeneity of capillary spaces in the yarn structure and increasing heat treatment stretch from 50 to 100 % (draw ratio=2) reduces capillary rise rate coefficient, because of the low capillary length. The present study indicates that an appropriate choice in production parameters of nanofiber yarn is all important in obtaining the desired properties of capillary rise.     

A scanner based neural network technique for color matching of dyed cotton with reactive dye

Conventional theory for color matching is Kubelka-Munk, but it fails in some situations. New intelligent procedures such as neural networks could learn the behavior of a complex system and produce accurate prediction. This paper investigates the ability of MLP (multiple layer perceptron) neural network for color matching of cotton fabric. Three reactive dyes, namely Levafix Red CA, Levafix Yellow CA and Levafix Blue CA were used for experiments. The dyed samples were scanned and L * a * b * histogram were extracted. Different neural networks were trained and tested using L * a * b * histogram of fabric’s images and also L * a * b * values (D65, 10°) of fabrics. The results were encouraging. For neural networks including the L * a * b * histogram in input vector, colorants and their concentration were predicted with a mean square error (MSE) less than 10^?5 and an average value of color difference (CMC (1:2)) less than 1.5 for approximately 80 % of testing data.     

Comparison of topical triamcinolone and oral atorvastatin in treatment of paederus dermatitis Northern Iran

Dermatitis caused by stimulation of beetle paederus, is a common health problem in Northern and some southern parts of Iran. Since by now, traditional medicine and some corticosteroid agents have been used for treatment of dermatitis caused by beetle paederus. Because, there are few researches about classical treatment of the disease at academic level, this study planned to compare the effectiveness of triamcinolone ointment and atorvastatin tablet with placebo in treatment ofpaederus dermatitis in Northern Iran. A randomized double-blind clinical trial was carried out on 30 patients referred to the hospital and clinics at Sari and Neka countries in Northern Iran during 6 months. Patients were randomly divided into two therapeutic equal groups. The first group was triamcinolone ointment twice a day and a placebo atorvastatin tablet daily. The second group was oral atorvastatin one tablet (20 mg) daily and a placebo triamcinolone ointment twice a day. In Seventh day of visits, therapeutic response of the patients in triamcinolone and atorvastatin group were 93.33 and 80%, respectively. No significant differences were found in therapeutic outcome between the two groups (p > 0.05). The results showed both oftriamcinolone ointment and oral atorvastatin had similar effect on paederus dermatitis. Because the paederus dermatitis is a self-limited disease use of topical therapy for treatment of the disease is recommend.     

Estimation of lucerne yield stability for enabling effective cultivar selection under rainfed conditions

Evaluation of crop and forage yield stability is of increasing relevance in the context of current and recent environmental changes but, in contrast to other field crops, there are no published systematic analyses among forage crops in Europe. A study of stability performance was conducted with 13 Czech cultivars of lucerne at four locations over a 2‐year period with the following aims: (a) to evaluate yield stability of varieties across different environments and (b) to calculate measurable benefits of variety selection in relation to the specific environment. The cultivar Vlasta was identified as the highest yielding cultivar (annual yield 16.0 t DM/ha), whereas the lowest yielding cv. Magda, Tereza and Oslava averaged around 14.9 t DM/ha. Effect of genotype × environment interaction (G × E) was two times higher than for genotype alone. Additive main effects and the multiplicative interaction (AMMI) model showed that the highest yielding cultivars may not be stable across environments. This study demonstrated further that significant yield improvement could be detected, even among a relatively homogenous group of domestic cultivars, and this was driven mainly by site productivity: the improvement was +10% in low‐yielding sites, compared with +3% in high‐yielding sites. Results highlight that advanced agronomy should also consider stability parameters such as AMMI stability value or superiority measures for forage crops in response to the challenges associated with climate change.     

Cytogenetic and FMS-like tyrosine kinase 3 mutation analyses in acute promyelocytic leukemia patients

Background: The secondary genetic changes other than the promyelocytic leukemia-retinoic acid receptor (PML-RARA) fusion gene may contribute to the acute promyelocytic leukemogenesis. Chromosomal alterations and mutation of FLT3 (FMS-like tyrosine kinase 3) tyrosine kinase receptor are the frequent genetic alterations in acute myeloid leukemia. However, the prognostic significance of FLT3 mutations in acute promyelocytic leukemia (APL) is not firmly established. Methods: In this study, the chromosomal abnormalities were analyzed by bone marrow cytogenetic in 45 APL patients and FLT3 internal tandem duplications (ITD) screening by fragment length analysis and FLT3 D835 mutation by melting curve analysis were screened in 23 APL samples. Results: Cytogenetic study showed 14.3% trisomy 8 and 17.1% chromosomal abnormalities other than t(15;17). About 13% of the patients had FLT3 ITD, and 26% had D835 point mutation. FLT3 ITD mutation was associated with higher white blood cell count at presentation and poor prognosis. Conclusion: The PML-RARA translocation alone may not be sufficient to induce leukemia. Therefore, we assume that FLT3 mutations and the other genetic and chromosomal alterations may cooperate with PML-RARA in the development of APL disease.Key Words: Chromosome aberrations, FMS-like tyrosine kinase 3, Acute promyelocytic leukemia