Echoguided closed commissurotomy for mitral valve stenosis in a dog

Surgical treatment of mitral stenosis (MS) usually consists of open mitral commissurotomy (MC) or percutaneous balloon MC, which require a cardiopulmonary bypass or transseptal approach, respectively. We describe here the first surgical management of congenital MS in a dog using a less invasive procedure, a surgical closed MC under direct echo guidance. A 5-year-old female Cairn terrier was referred for ascites, weakness, and marked exercise intolerance for 2 months, which was refractory to medical treatment. Diagnosis of severe MS associated with atrial fibrillation (AF) was confirmed by echo-Doppler examination and electrocardiography. Poor response to medical treatment suggested a corrective procedure on the valve was indicated. However, due to the cost and high mortality rate associated with cardiopulmonary bypass, a hybrid MC was recommended. A standard left intercostal thoracotomy was performed and three balloon valvuloplasty catheters of differing diameters were sequentially inserted through the left atrium under direct echo guidance. Transesophageal echocardiography revealed a 62% reduction in the pressure half-time compared to the pre-procedure. Thirteen months after surgery the dog is still doing well with resolution of ascites and a marked improvement of most echo-Doppler variables.     

Effect of passage of a Potato virus Y isolate on a line of tobacco containing the recessive resistance gene va2 on the development of isolates capable of overcoming alleles 0 and 2

Control strategies developed for plant viral diseases through breeding programs can be impaired by adaptive response of pathogens. A few years after the deployment in France of improved tobacco genotypes introgressed with alleles of the Potato virus Y (PVY) recessive resistance gene va, necrotic symptoms associated with PVY infection have been reported on these cultivars. Due to the lack of efficient alternative methods to control PVY, the va resistance sources have to be managed according to viral parameters, such as the dynamic of emergence of virulent variants. The effects of va alleles on the evolution of PVY was tested in experimental conditions using a PVY infectious clone and two couples of resistant tobacco near isogenic lines BVA/Bva ⁰ and FVA/Fva ² both allelic for the va gene. Infection efficiencies data showed that a single passage on Fva ² line led to the selection of virulent viral populations able to overcome both va ⁰ and va ² alleles. Sequence analyses of va ² derived PVY variants revealed that the acquisition of the capacity to overcome va ² resistance is associated with single point mutations at two different nucleotide positions in the central part of the VPg. The described PVY adaptation process to overcome resistance mediated by different va alleles should be considered for the future development of durable and integrated strategies of management of PVY infections in tobacco crops.     

Near-perfect elastoplasticity in pure nanocrystalline copper

Ductile metals and alloys undergo plastic yielding at room temperature, during which they exhibit work-hardening and the generation of surface instabilities that lead to necking and failure. We show that pure nanocrystalline copper behaves differently, displaying near-perfect elastoplastic behavior characterized by Newtonian flow and the absence of both work-hardening and neck formation. We observed this behavior in tensile tests on fully dense large-scale bulk nanocrystalline samples. The experimental results further our understanding of the unique mechanical properties of nanocrystalline materials and also provide a basis for commercial technologies for the plastic (and superplastic) formation of such materials.     

Characteristics and potential pedogenetic processes of a Technosol developing on iron industry deposits

Purpose

Technosols include soils dominated or strongly influenced by human-made materials. Similarly to natural soils, technogenic parent materials submitted to environmental factors undergo weathering and transformation processes. But the pedogenesis of Technosols remains little known. With this aim in view, a Technosol developing on purely technogenic materials resulting from an iron industry was thoroughly characterized in order to discuss the pedogenetic evolution of this Technosol using knowledge about the pedogenesis of natural soils.

Materials and methods

The studied site was a former settling pond where mainly sludge generated by wet cleaning of blast furnace fumes was dumped probably until the mid-twentieth century. Thereafter, the pond has been colonized by vegetation and is covered by a diversified forest. The soil was composed of contrasted layers. A 20-cm organic layer has developed at the surface. Samples were collected in the first 2 m which are under root influence. Elemental composition, agronomic parameters, mineralogy, as well as the physical and hydraulic properties of the soil materials were characterized.

Results and discussion

Some characteristics of the Technosol, e.g. elemental composition, mineralogy or profile stratification, resulted mainly from industrial processes. However, some properties of the Technosol can be compared with natural soils. Particularly, the presence of low periodic order minerals and physical and hydraulic properties were analogous to the properties of Andosols. However, alkaline pH and the carbonate contents made the Technosol closer to carbonated soils. Moreover, the presence of Mn oxides, high porosity and water retention were also encountered in Mn-bearing soils. Early pedogenic processes, e.g. development of organic surface layer and signs of mineral weathering, were observed. But transfers seemed to be rather limited and/or slow in the profile. However, the physical and chemical properties, e.g. high water retention and high pH, were rather favourable to element retention.

Conclusions

The evolution of the Technosol seems to be still limited in the profile, which could be explained by the high retention capacity of the soil. The presence of highly reactive mineral phases, such as low periodic order Mn oxides or allophane-like minerals, with high contents of carbonates is rarely encountered in the natural environment and may suggest an important potential for pedogenic evolution, which could be directed by the balance between the weathering processes of these phases.     

Effect of some repetitive factors on turbot stress response

The stress response of the turbot, Scopthalmus maximus (L.), to repetitive factors including netting, air exposure, blood sampling and hand-stripping, were tested using two different tank sizes as well as two blood sampling techniques. Exposure of juvenile fish to air for 1-4 min had no immediate effect on plasma cortisol concentrations or haematocrit values. Similarly, the serial netting of immature fish from tanks did not significantly modify plasma cortisol concentrations, haematocrit or osmolarity values. Hand-stripping of mature males was more disturbing than air exposure. The cumulative effect on plasma cortisol levels and osmolarity of stress factors such as netting, air exposure, blood sampling and stripping applied simultaneously to mature males in a 16 m3 tank and repeated twice daily for several days was recorded. The level of cortisol increased from 5 ng ml-1 to 300 ng ml-1 after 10 days of treatment, while an osmoregulatory imbalance and fish death were observed. Moreover, adaptation of fish to smaller tanks seemed to improve the increased plasma cortisol levels and death rate. Reduction in the number of stress factors applied greatly decreased both the range of physiological responses and the death rate. In order to avoid a cumulative stress response, handling of fish should therefore be reduced to a minimum.     

Extra-large-pore zeolites with two-dimensional channels formed by 14 and 12 rings

Stable zeolites that have larger pore apertures and a three-dimensional pore topology are of interest because they could be used to adsorb larger molecules, particularly for application in oil refining. Several large-pore zeolitic materials with channels formed by openings of more than 12 rings are known, but all of them have a one-dimensional channel system that limits their use in catalysis. We report the synthesis and some characterizations of IM-12, a thermally stable germanium-containing zeolite that contains the first two-dimensional channel system with extra-large pores formed by 14- and 12-ring channels.     

Changes in the diversity and geographic distribution of cultivated millet (Pennisetum glaucum (L.) R. Br.) and sorghum (Sorghum bicolor (L.) Moench) varieties in Niger between 1976 and 2003

Changes in the diversity of landraces in centres of diversity of cultivated plants need to be assessed in order to monitor and conserve agrobioversity—a key-element of sustainable agriculture. This notably applies in tropical areas where factors such as increased populations, climate change and shifts in cropping systems are hypothesized to cause varietal erosion. To assess varietal erosion of staple crops in a country subjected to various anthropogenic and natural environmental changes, we carried out a study based on a comparison of the diversity of pearl millet and sorghum varieties collected in 79 villages spanning the entire cereal-growing zone of Niger over a 26 year period (1976–2003). For these two crops, the number, name and type of varieties according to important traits for farmers were considered at different spatial scales (country, region, village) at the two collection dates. The results confirmed the high diversity of millet and sorghum varieties in Niger. No erosion of varietal diversity was noted on a national scale during the period covered. Some changes were observed but were limited to the geographical distribution of certain varieties. This highlights that farmers’ management can preserve the diversity of millet and sorghum varieties in Niger despite recurrent and severe drought periods and major social changes. It also indicates that rainfed cereal cropping systems in Niger should remain to be based on millet and sorghum, while reinforcing farmers’ seed systems.