Probabilistic evaluation of the final moisture content of kiln-dried lumber using the bootstrap method

This paper presents a probabilistic method of evaluating the final moisture content (MC) of lumber obtained at the end of the kiln-drying process. The final MC data of three different drying tests conducted in past studies were analyzed using the bootstrap method. Target MC was tentatively set below 20 % in the analysis. Two characteristic parameters representing the final MC were estimated with bootstrap confidence intervals. These parameters were the standard deviation (SD) and the percentage of the population that met the MC requirement of less than 20 % (P ₂₀). The histograms of the final MC and the subsequent goodness-of-fit tests revealed that the final MC data of two drying tests did not follow any classical probability distributions, including Normal, Log-Normal, Weibull, and Gamma distributions, thus indicating the need for nonparametric statistics. The uncertainty of the final MC could be evaluated with the estimated SD and P ₂₀. After deriving the relationships between P ₂₀ and the corresponding probability that P ₂₀ is not achieved, we demonstrated how such relationships could provide a kiln operator with information to facilitate better decision-making in optimizing a drying schedule.     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.     

Fatigue of structural plywood under cyclic shear through thickness I: fatigue process and failure criterion based on strain energy

The fatigue behavior of plywood specimens under shear through thickness was examined on the basis of strain energy to obtain common empirical equations for the fatigue process and failure criterion under various loading conditions. Specimens were cut from commercial plywood panels of 9-mm thickness. Loading conditions were set as follows: a square waveform at a loading frequency of 0.5 Hz, a triangular waveform at 0.5 Hz, and a triangular waveform at 5.0 Hz. Peak stress applied was determined to be 0.5, 0.7, and 0.9 of static strength, that is, stress levels of 0.5, 0.7, and 0.9. The stress-strain relationships were measured throughout the fatigue test, and the strain energy was obtained at each loading cycle. Loading conditions apparently affected the relationship between stress level and fatigue life. On the other hand, the relationship between mean strain energy per cycle and fatigue life was found to be independent of loading conditions. Mean strain energy per cycle obtained as the fatigue limit was 5.85 kJ/m³ per cycle. Assuming that the accumulation of strain energy is a fatigue indicator, the fatigue process and failure criterion for the plywood specimens under the three loading conditions were commonly expressed by the relationship between cumulative strain energy and loading cycles.     

Leaf water relations in <Emphasis Type="Italic">Pinus densiflora</Emphasis> Sieb. et Zucc. on different soil moisture conditions

To elucidate the differences in the leaf water relations of Pinus densiflora Sieb. et Zucc. growing in different soil moisture conditions, we examined the pressure-volume curve and the diurnal changes in the stomatal conductance, the transpiration rate, and the leaf water potential. The leaf water relations were compared using field-grown 40-year-old pine trees growing on the upper and lower parts of a slope. We also compared the leaf water relations of potted 4-year-old saplings growing at pF 4.2 and pF 1.8 soil moisture levels for almost 1 year. The values of the ratio of symplasmic water at turgor loss point to symplasmic water at saturated point (V_p/V_o) and bulk modulus of elasticity () of both the adult trees on the upper part of the slope and the potted saplings growing on pF 4.2 soil moisture were higher than those values of both the adult trees on the lower part of the slope and the potted saplings growing on pF 1.8 soil moisture, respectively. The field-grown adult tree and the potted saplings growing under long-term water stress tended to reduce their stomatal conductance in response to the acute soil drying. It is suggested that P. densiflora growing under long-term water stress rapidly closed its stomata in response to soil drying and avoided losing water, and could also rapidly absorb water with reducing water loss because of the decrease in the leaf pressure potential derived from the high values.     

Comparison of stand dynamics after dieback caused by pine wilt disease among pine forests with different management regimes in western Japan

In pine forests damaged by pine wilt disease, in western Japan, the effect of protection regimes of pine trees on the stand dynamics were examined in the following four stands: (1) lightly damaged stand (age 30–40 years) with no procedure in operation for protecting pine trees; (2) severely damaged stand (age 30–40 years) with no procedure in place for protecting pine trees; (3) severely damaged stand (age 50 years) with a selective cutting of infected trees; (4) severely damaged stand (age 30–40 years) with a selective cutting of infected trees. All the stands had been abandoned before the pine wilt disease damage. The understory structure of the severely damaged stand with no protection procedure was similar to that of the lightly damaged stand. Frequent invasion by tree species and acceleration in the growth of understory trees occurred after the dieback in the selective cutting stand. These results suggest that a deficiency in the canopy layer caused by the dieback resulted in low disturbance intensity in the early stages after the dieback, but the selective cutting increased the intensity by the reduction in the understory as well as the canopy layer. The intensity of the disturbance in the selective cutting stands was larger in the younger stand because it had a higher density of selectively cut pine trees. The different stand structure of pine forests occurred after the dieback because the intensity of the disturbance varied as a result of the selective cutting operation and the stand age.     

Vitamin D Status in Different Stages of Disease Severity in Dogs with Chronic Valvular Heart Disease

Background

In humans with heart disease, vitamin D deficiency is associated with disease progression and a poor prognosis. A recent study showed that serum 25‐hydroxyvitamin D [25(OH)D] concentration, the hallmark of vitamin D status, was lower in dogs with heart failure than in normal dogs, and a low concentration was associated with poor outcome in dogs with heart failure.

Objectives

To elucidate the vitamin D status of dogs with chronic valvular heart disease (CVHD) at different stages of disease severity.

Animals

Forty‐three client‐owned dogs with CVHD.

Methods

In this cross‐sectional study, dogs were divided into 3 groups (14 dogs in Stage B1, 17 dogs in Stage B2, and 12 dogs in Stage C/D) according to ACVIM guidelines. Dogs underwent clinical examination including echocardiography. Serum 25(OH)D concentrations were measured in each dog.

Results

Serum 25(OH)D concentration was significantly lower in Stage B2 (median, 33.2 nmol/L; range, 4.9–171.7 nmol/L) and C/D (13.1 nmol/L; 4.9–58.1 nmol/L) than in Stage B1 (52.5 nmol/L; 33.5–178.0 nmol/L) and was not significantly different between Stage B2 and Stage C/D. Among clinical variables, there were significant negative correlations between 25(OH)D concentration and both left atrial‐to‐aortic root ratio and left ventricular end‐diastolic diameter normalized for body weight.

Conclusions and Clinical Importance

These results indicate that vitamin D status is associated with the degree of cardiac remodeling, and the serum 25(OH)D concentration begins to decrease before the onset of heart failure in dogs with CVHD.     

Differentiation of canine bone marrow stromal cells into voltage- and glutamate-responsive neuron-like cells by basic fibroblast growth factor

We investigated the in vitro differentiation of canine bone marrow stromal cells (BMSCs) into voltage- and glutamate-responsive neuron-like cells. BMSCs were obtained from the bone marrow of healthy beagle dogs. Canine BMSCs were incubated with the basal medium for neurons containing recombinant human basic fibroblast growth factor (bFGF; 100 ng/ml). The viability of the bFGF-treated cells was assessed by a trypan blue exclusion assay, and the morphology was monitored. Real-time RT-PCR was performed to evaluate mRNA expression of neuronal, neural stem cell and glial markers. Western blotting and immunocytochemical analysis for the neuronal markers were performed to evaluate the protein expression and localization. The Ca²⁺ mobilization of the cells was evaluated using the Ca²⁺ indicator Fluo3 to monitor Ca²⁺ influx. To investigate the mechanism of bFGF-induced neuronal differentiation, the fibroblast growth factor receptor inhibitor, the phosphoinositide 3-kinase inhibitor or the Akt inhibitor was tested. The bFGF treatment resulted in the maintenance of the viability of canine BMSCs for 10 days, in the expression of neuronal marker mRNAs and proteins and in the manifestation of neuron-like morphology. Furthermore, in the bFGF-treated BMSCs, a high concentration of KCl and L-glutamate induced an increase in intracellular Ca²⁺ levels. Each inhibitor significantly attenuated the bFGF-induced increase in neuronal marker mRNA expression. These results suggest that bFGF contributes to the differentiation of canine BMSCs into voltage- and glutamate-responsive neuron-like cells and may lead to the development of new cell-based treatments for neuronal diseases.     

Nutrient starvation affects expression of LC3 family at the feto-maternal interface during murine placentation

LC3 − the mammalian homolog of Atg8 − was found as autophagosome membrane binding protein in mammals and widely used as an autophagosomal marker. LC3A, B and C show different expression patterns in each tissue. The aim of this study was to reveal the differences of expression patterns among LC3 families in mouse placenta under normal condition and nutrient starving condition. LC3A and B were highly expressed in decidual cells. LC3A and B were increased in D14 compared with D12 and D16 in mouse placenta, while LC3C was decreased. Starvation induced increase in LC3B expression specifically. Immunohistochemistry showed different expression patterns among LC3A, B and C. LC3A expression in syncytiotrophoblast was vanished by starvation. The results of real time RT-PCR suggested differences between D12 and D16 in autophagic cascade induced by starvation. Taken together, this study suggests that autophagy could play a role in placental invasion system and that nutrient starvation affects LC3B expression.     

Evidence of LAT1 expression in canine caput epididymis

L-type amino acid transporter 1 (LAT1), the first isotype of amino acid transport system L, transports aromatic and branched amino acids pivotal for fundamental cellular activities such cellular growth and proliferation. LAT1 expression was high only in the brain in contrast to its limited distribution and low level of expression in normal tissues. We found potent LAT1 expression in canine caput epididymis by quantitative RT-PCR and Western blotting analysis. Immnuno-histochemical examination revealed observable LAT1 in microvillous epithelial cells.     

Genetic analysis of fat‐to‐protein ratio,milk yield and somatic cell score of Holstein cows in Japan in the first three lactations by using a random regression model

We estimated the genetic parameters of fat‐to‐protein ratio (FPR) and the genetic correlations between FPR and milk yield or somatic cell score in the first three lactations in dairy cows. Data included 3 079 517 test‐day records of 201 138 Holstein cows in Japan from 2006 to 2011. Genetic parameters were estimated with a multiple‐trait random regression model in which the records within and between parities were treated as separate traits. The phenotypic values of FPR increased soon after parturition and peaked at 10 to 20 days in milk, then decreased slowly in mid‐ and late lactation. Heritability estimates for FPR yielded moderate values. Genetic correlations of FPR among parities were low in early lactation. Genetic correlations between FPR and milk yield were positive and low in early lactation, but only in the first lactation. Genetic correlations between FPR and somatic cell score were positive in early lactation and decreased to become negative in mid‐ to late lactation. By using these results for genetic evaluation it should be possible to improve energy balance in dairy cows.