Drought effects on C,N, and P nutrition and the antioxidative system of beech seedlings depend on geographic origin

In future, prolonged summer drought and heat will constitute a major risk for the cultivation of shallow‐rooting beech in Central Europe and will negatively affect the productivity of beech forests. In a pot experiment under controlled conditions, the influence of long‐term (28 d) water deprivation on nitrogen (N), carbon (C), phosphate (P_i), and ascorbate (ASC) concentrations was examined in leaves and fine roots of beech seedlings (Fagus sylvatica L.) from six provenances originating from Central Europe (Germany: Neidenstein and Illertissen, intermediate habitats), the Balkan peninsula (Croatia: Zagreb and Gospic, wet habitats), and Southeast Europe (Bulgaria: Kotel, Greece: Paikos; dry habitats). The goal of the study was to identify beech provenances well adapted to water limitation during summer drought events. Our results suggest that N might be involved in the alleviation of water scarcity, whereas P_i might become a limiting factor for forest growth during drought periods. Drought stress resulted in significant changes of ASC pools in leaves and fine roots and the ASC redox state. Under well‐watered and under drought conditions, ASC in leaves was the most important factor causing differences between the provenances examined. Finally, a link between P nutrition and the capacity of antioxidative stress defense by ascorbate could be highlighted. Based on observations from this study, beech seedlings from three origins (Paikos, Zagreb, and Neidenstein) might constitute beech provenances well adapted to water shortage in summer. This conclusion is drawn from the high potential of these provenances to alleviate oxidative stress during water shortage.     

Properties of flat-pressed wood plastic composites as a function of particle size and mixing ratio

This paper presents the effects of particle size and mixing ratio on the properties including physical, mechanical, and decay resistance of wood plastic composites (WPCs). In addition, it also presents the effects of immersion temperatures on water absorption (WA) and thickness swelling (TS) of the WPCs. WPCs with a thickness of 6 mm were fabricated from Albizia richardiana King & Prain wood particles and recycled polyethylene terephthalate (PET) by the flat-press method. To prepare the WPCs, two different wood particle sizes (0.5–1.0 and 1.01–2.0 mm) were used along with four different mixing ratios (w/w). Subsequently, the physical properties include density, moisture content, WA, and TS, and mechanical properties include modulus of elasticity (MOE) and modulus of rupture (MOR) of the produced WPCs was evaluated. Furthermore, decay resistance was evaluated by the weight loss percentage method. Moreover, the effects of immersion temperatures on WA and TS of WPCs after 24 h of immersion in water at three different temperatures, i.e., 25, 50, and 75 °C were investigated. Results showed that the wood particle size had impact on WPC’s density (only 6% decreased with the increase of particle size); however, the density decreased by 29% when the wood particle content increased from 40 to 70%. The WA and TS gradually increased with the increase of particle content and decrease of particle size. In addition, WA and TS increased proportionately with increasing immersion temperature from 25 to 75 °C. Furthermore, the highest MOE (2570 N/mm²) was found for the WPCs fabricated from large wood particles having the ration of 50:50 (wood particle:PET). For decay resistance, WPCs consisted of larger particles and higher PET content showed greater resistance against decay. Therefore, it is comprehensible that fabrication of the WPCs from 50% large particles and 50% PET is technically feasible and further improvement of WPC performance like enhancement of MOE and reduction of density using coupling agent and agricultural waste fibers, respectively, in the WPC formulation is recommended.     

A Comparative Study Between the McGill #2 Laboratory Mill and Commercial Milling Systems

The degree of similarity between rice milled in a McGill #2 laboratory mill and commercial milling processes was evaluated using eight physical, physicochemical, and end‐use properties. There was no statistical difference between the two milling systems with respect to color parameters L* and a*, final viscosity, texture, and end‐use cooking properties (α = 0.05). Overall, the kernel dimensions of length, width, and thickness were less in the McGill #2 laboratory‐milled rice than the same rice milled commercially. The incidence of bran streaks and peak viscosity values were each higher when the rice sample was milled commercially in 27, and 28, respectively, of the 29 samples by means comparison. The decrease in kernel dimensions and incidence of bran streaks were attributed to the more aggressive nature of the single‐pass, batch milling system of the McGill #2 laboratory mill as compared with multipass, continuous milling systems that are used commercially. Finally, as surface lipid content (SLC) decreased, L* increased and a*, b*, and the incidence of bran streaks decreased for both milling systems.     

Effects of different high constant and alternating temperatures on the development and prey consumption of Dicyphus tamaninii Wagner (Heteroptera, Miridae) with Aphis gossypii Glover (Homoptera, Aphididae) as prey

The present work aimed to study the effects of high constant and alternating temperatures on the development and prey consumption by Dicyphus tamaninii Wagner (Het., Miridae) with Aphis gossypii Glover (Hom., Aphididae) as prey.Results showed that the predator was able to successfully develop and reach the adult stage, on average, after 20.1 () and 20.6 () days at a temperature of 30 ± 1 °C with A. gossypii as prey. On the other hand, it was not able to develop at 35 ± 1 °C, here all N₁ instars used at the beginning of the experiments had died even before moulting to N₂ instar. At alternating temperatures of 25/15 ± 1 °C, the predator reached the adult stage 23.7 () and 23.5 () days after egg hatching, whereas when the temperatures were increased to 35/22 ± 1 °C, it took a significantly shorter period: 20.6 () and 20.9 () days. In general, the highest mortality occurred during the first two nymphal instars. The total percentage mortality during development from N₁ to adult stage was 30 % and 100 % at the constant temperatures 30 ± 1 °C and 35 ± 1 °C, respectively. At the alternating temperatures of 25/15 ± 1 °C, it was lowest with 16.5 %, while at 35/22 ± 1 °C, it was 20 %.The results of the experiments on prey consumption showed that an individual D. tamaninii consumed during its development to adult stage at 30 ± 1 °C an average of 442.2 (), 433.6 () aphids. At the constant temperature of 35 ± 1 °C, the average daily prey consumption started with 4 aphids and decreased continuously till it approached nil on the 9th day, where all predatory nymphs died. At the alternating temperatures of 25/15 ± 1 °C, the total prey consumption during development was, on average, 359.3 () and 297.0 () aphids, while at 35/22 ± 1 °C it was 348.5 () and 334.0 () aphids. The effect of the four temperatures on the prey consumption by D. tamaninii during the first 10 days after emergence was also studied. At a constant temperature of 30 ± 1 °C, a total of 446.4 () and 372.0 () aphids were consumed, compared to 40.6 () and 39.0 () at 35 ± 1 °C. At alternating temperatures of 25/15 ± 1 °C, the predatory adult consumed, on average, a total of 267.0 () and 207.0 () aphids. Increasing the temperature to 35/22 ± 1 °C resulted in a higher prey consumption by the adult predator, reaching 351.5 () and 267.7 () aphids over the same period.In conclusion, results indicated that D. tamaninii is a promising predator of the melon aphid at a temperature spectrum ranging from 15 ± 1 °C up to 35 ± 1 °C.     

Analysis of the epitopes on staphylococcal enterotoxin A responsible for emetic activity

To identify which region of staphylococcal enterotoxin A (SEA) is responsible for the emetic activity, twelve synthetic peptides corresponding to the entire SEA amino acid sequence and their respective anti-peptide antibodies were prepared and tested. The anti-peptide antibodies were tested for neutralization of SEA-induced emesis in Suncus murinus (Shrew mouse). The results indicate that SEA-induced emesis was neutralized by the mixture of three anti-peptide antibodies to A-7 (corresponding to amino acid residues 121-140), A-8 (141-160) and A-9 (160-180). These findings suggest that the regions corresponding to residues 121-180 may be the epitopes responsible for the emetic activity of SEA.     

House fly head GABA-gated chloride channel: [3 H] α-Endosulfan binding in relation to polychlorocycloalkane insecticide action

This study attempts to use [³H] α-endosulfan to examine directly the binding site(s) for cyclodienes, lindane and toxaphene (collectively referred to as the polychlorocycloalkane or PCCA insecticides) in the 4-aminobutyric acid (GABA)-gated chloride channel. [³H] α-Endosulfan was prepared by reduction of hexachloronorbornenedicarboxylic anhydride with sodium borotritide, then coupling the labelled alcohol with thionyl chloride followed by HPLC purification (35 Ci mmol^?1, > 99% radiochemical purity). This new candidate radioligand readily partitions into lipid membranes and undergoes indiscriminate adsorption to surfaces resulting in high levels of non-specific binding. This makes it very difficult to differentiate the small portion of specific binding at the site relevant to toxic action. This problem was partially circumvented by incubating [³H] α-endosulfan (0.1 nM) with house-fly head membranes (0.2 mg protein) for 70 min at 22°C giving 23 (±4)% specific binding (40 fmol mg^?1 protein) determined as the difference between the radioligand alone and on preincubation for 15 min with unlabelled α-endosulfan (final concentration 100 nM). This procedure is not appropriate for determination of saturation isotherms and standard binding kinetics. However, the effectiveness of 16 PCCAs (also at 100 nM final concentration) in blocking the specific binding of [³H] α-endosulfan is generally consistent with their relative potencies as inhibitors of 4-[³H] propyl-1-(4-ethynylphenyl)-2,6,7-trioxabicyclo[2.2.2] octane ([³H]EBOB) binding suggesting that the binding site for both [³H]α-endosulfan and the PCCAs is part of the GABA-gated chloride channel. Insecticidal channel blockers of other types (e.g. picrotoxinin, trioxabicyclooctanes, a dithiane, and phenylpyrazoles) and GABA are poor inhibitors of [³H] α-endosulfan binding relative to their potencies as inhibitors of [³H] EBOB binding. It therefore appears that the PCCAs compete directly for the [³H] α-endosulfan site, whereas the other channel blockers bind with different inhibition kinetics or at a site more closely coupled to the EBOB than the α-endosulfan binding domain.     

Sustained-release formulations ofBacillus thuringiensis serotype H-14 and plastic formulations of Abate for long-term control of mosquito larvae

The larvicidal activity of sustained-release formulations ofBacillus thuringiensis H-14 (Bactimos briquets) and controlledrelease plastic formulations of Abate against mosquito larvae ofAedes aegypti (L.) has been evaluated. The test formulations provided continuous effective control with 90–100% larval mortality for several weeks. The presence of suspended soil constituents was associated with a lowering of larval mortality and tended to reduce the durations of effective control of Bactimos and Abate plastic pellets against mosquito larvae by about 1.8 and 2.2 times, respectively. Treatments with such formulations did not appear to prevent hatch of eggs which oviposited after application, but all newly hatched larvae failed to develop beyond the second instar.     

Factors affecting efficacy ofBacillus thuringiensis H-14 against mosquito larvae with special reference to the joint action of the pathogen with three chemical insecticides

In laboratory trials with the pathogenBacillus thuringiensis H-14 (B. t. H-14) against culicine larvae ofCulex pipiens L. andAedes aegypti (L.), the following factors significantly influenced larvicidal activity: larval instars, mosquito species, exposure time and temperature. Variation in water pH, however, did not significantly affected efficacy. Different levels of potentiation and additive effects were also obtained when the bacterial agentB. t. H-14 applied jointly with the chemical insecticides malathion, dursban and fenvalerate against mosquito larvae.