Mapping QTL involved in adult plant resistance to powdery mildew in the winter wheat line RE714 in two susceptible genetic backgrounds

The objective was to study the genetic basis of adult plant resistance to powdery mildew of the winter wheat line RE714 by quantitative trait loci (QTL) analysis and to investigate the stability of the QTL detected in two different genetic backgrounds. Two DH populations from the crosses between RE714 and the susceptible parents ‘Festin’ and ‘Hardi’ were used. Reaction of the DH lines to powdery mildew was assessed in different environments in Belgium under natural disease infection. Considering both populations and according to the environment tested, one to seven QTL were detected. Among them, residual effects of the race‐specific resistance genes Pm4b and MIRE were found. Two major QTL were very stable (on chromosome 5D and at the MIRE locus), since they were detected in both populations and over all environments tested. The QTL detected varied according to the susceptible parent used, and a residual effect at the Pm4b gene was not observed with the genetic background of ‘Hardi’.     

Amplified fragment length polymorphism- and simple sequence repeat-based molecular tagging and mapping of greenbug resistance gene Gb3 in wheat

The greenbug, Schizaphis graminum (Rondani), is the most economically damaging aphid pest of wheat in the southern Great Plains of the USA. In this study, the single, dominant greenbug resistance gene, Gb3, was molecularly tagged and genetically mapped using amplified fragment length polymorphism (AFLP) and simple sequence repeat(SSR) markers. Three AFLP loci were associated with the Gb3 locus in linkage analysis with 75 F_2:3 families from the cross between two near‐isogenic lines (NILs) for Gb3,‘TXGBE273’ and ‘TXGBE281′. Two of these loci, XMgcc Pagg and Xmagg Patg cosegregate with Gb3 in the population analysed. Further analysis indicated that XMgcc Pagg and Xmagg Patg are specific for the Gb3 locus in diverse genetic backgrounds. Two SSR markers, Xgwm111 and Xgwm428 previously mapped in wheat chromosome 7D, were shown to be linked with Gb3, 22.5 cM and 33.1 cM from Gb3, respectively, in an F₂ population of ‘Largo’בTAM 107’, suggesting that Gb3 is located in the long arm of chromosome 7D. The two AFLP markers cosegregating with Gb3 are valuable tools in developing molecular markers for marker‐assisted selection of greenbug resistance in wheat breeding.     

A new locus for resistance to brown planthopper identified in the indica rice variety DV85

The brown planthopper (BPH) is one of the most destructive insect pests of rice. Resistant varieties have proved to be one of the most economic and effective measures for BPH management. In this study, an indica rice ‘DV85’ showed resistance to biotype 2 of BPH by bulked seedling test, and a recombinant inbred line (RIL) population derived from a cross between a susceptible rice ‘Kinmaze’ and ‘DV85’ was phenotyped to map genetic factors conferring BPH resistance in ‘DV85′. Composite interval mapping revealed that one quantitative trait locus (QTL) with a LOD score of 10.1 was detected between XNpb202 and C1172 on chromosome 11. This QTL was designated as Qbph11. Qbph11 explained 68.4% of the phenotypic variance of BPH resistance in this population. The allele from the resistant parent ‘DV85’ at Qbph11 reduced the damage caused by BPH feeding and would be very useful in breeding resistant rice varieties via marker‐assisted selection.     

The measurements of acid detergent fibre in rapeseed by visible and near-infrared spectroscopy

Visible and near‐infrared spectroscopy (NIRS) calibrations for acid detergent fibre (ADF) in intact rapeseed (Brassica napus L.) were performed for two different sample volumes (10 ml, 500 seeds approximately; and 1 ml, 50 seeds approximately). The inclusion of brown and yellow‐seeded cultivars in this work has allowed the whole range of ADF currently described in the literature for this character to be covered. Chemometric techniques have been used for developing calibration equations for both procedures when measuring the two different seed sample volumes. On the basis of the coefficient of determination in the cross‐validation (R²cv) obtained for the 10 and 1 ml assays (0.80 and 0.73), and SECV/SEL ratios (2.30 and 2.57), respectively, both equations showed an accuracy sufficient for screening purposes in an ADF range from 6.80 to 13.46% dry wt, which is presented in this work.     

The Exploitation of Crop Allelopathy in Sustainable Agricultural Production

Crop allelopathy may be useful to minimize serious problems in the present agricultural production such as environmental pollution, unsafe products, human health concerns, depletion of crop diversity, soil sickness and reduction of crop productivity. Several crops including alfalfa, buckwheat, maize, rice, rye, sorghum, sunflower, wheat, etc. are affected either by their own toxicity or phytotoxin exudates when their residues decompose in the soil, that show strong suppression on weed emergences. Allelopathic crops when used as cover crop, mulch, smother crops, green manures, or grown in rotational sequences are helpful in reducing noxious weeds and plant pathogen, improve soil quality and crop yield. Those crop plants, particularly the legumes, incorporated at 1–2 tons ha⁻¹ (alfalfa, buckwheat, rice by-products), which can give weed reduction and increase of rice yield by 70 and 20 %, respectively, are suggested for use as natural herbicides. Allelochemicals from allelopathic crops may aid in the development of biological herbicides and pesticides. Cultivating a system with allelopathic crops plays an important role in the establishment of sustainable agriculture. The introduction of allelopathic traits from accessions with strong allelopathic potential to the target crops will enhance the efficacy of crop allelopathy in future agricultural production.     

Carbon Isotope Discrimination, Leaf Ash Content and Grain Yield in Bread and Durum Wheat Grown under Full-Irrigated Conditions

Integrative physiological criteria, such as carbon isotope discrimination (Δ) and (mineral) ash content (m_a) have been found to be very useful, under drought conditions, to elucidate the association between yield gains and variation of photosynthesis‐related traits and orientate future breeding efforts. Information on this association is scarce under irrigated conditions. The relationships between Δ, m_a and yield were studied in bread wheat (Triticum aestivum L.) and durum wheat (Triticum turgidum L. var. durum) under optimal (drip) irrigation in the arid conditions of north‐west Mexico. Carbon isotope discrimination was analysed on leaves at booting stage and anthesis and on grain at maturity, whereas ash content was measured on the flag leaf at anthesis and maturity. At anthesis, there were differences between bread and durum wheat during grain filling for Δ, but not for m_a. No relationship was found between grain yield and Δ. Leaf ash content at anthesis and maturity showed a broad variability within each species and were associated with grain yield. These results suggest that ash content in leaves could be also used as predictive criteria for yield not only under drought, but also under irrigated conditions, particularly when evaporative demand is high.     

Development of colchicine‐induced tetraploid St. Augustinegrass (Stenotaphrum secundatum) lines

St. Augustinegrass is well suited for lawns and commercial landscapes. While many genotypes are cross‐fertile, all cultivars are propagated vegetatively in sod production. To ensure varietal purity, development of sterile triploid hybrids by crossing tetraploid and diploid genotypes has been successfully used in other warm‐season turfgrasses. Applying this model in St. Augustinegrass would be beneficial to sod producers and turf managers who require purity for certification and uniformity for performance, respectively. This study was conducted to develop colchicine‐induced tetraploid lines of St. Augustinegrass. Seeds of cultivar ‘Raleigh’ were treated with four colchicine concentrations at four exposure times. A non‐treated control was included among the treatments. Seedlings that germinated were screened for genome size changes using flow cytometry. Line DSA 13005 and two progeny lines derived through selfing, DSA 16001 and DSA 16016, were corroborated as tetraploids (2n = 4x = 36) through chromosome counts. These lines will be used in future breeding efforts to attempt development of sterile triploid cultivars of St. Augustinegrass.     

Development of a methodology to forecast the nutritional value of new tomato hybrids

Tomato is a food of great relevance both due to its large-scale consumption and its richness in bioactive components. It is an important component of the traditional Mediterranean diet as well as of other diets. Nowadays, concerns about human health and environment preservation have changed the objectives of tomato breeding. In this study, eight tomato F₁ hybrids and their parental lines were analyzed for nutritional properties and agronomic traits using a new selection method that combines biochemical and agronomic evaluation. Eight traits contributing to the nutritional quality of tomato (lycopene, β-carotene, other carotenoids, flavonoids, phenolic acids, vitamins C and E, dry residue) and average yield were assessed in fifteen tomato genotypes. Furthermore the pathogen resistances possessed from these genotypes were, also, considered. In order to select valuable tomato hybrids, a nutritional index (I_QUAN) and an agronomic index (AI) were calculated. Our results suggested that the I_QUAN nutritional index may be very useful to forecast the nutritional value of F₁ hybrids based on parental performance. Combining the use of the I_QUAN and AI indexes, we were able to select two hybrids (MR 48 and MR 47) that contain considerable amounts of antioxidants and acceptable parameters for commercial production.     

A rapid staining‐assisted wood sampling method for PCR‐based detection of pine wood nematode Bursaphelenchus xylophilus in Pinus massoniana wood tissue

For reasons of unequal distribution of more than one nematode species in wood, and limited availability of wood samples required for the PCR‐based method for detecting pinewood nematodes in wood tissue of Pinus massoniana, a rapid staining‐assisted wood sampling method aiding PCR‐based detection of the pine wood nematode Bursaphelenchus xylophilus (Bx) in small wood samples of P. massoniana was developed in this study. This comprised a series of new techniques: sampling, mass estimations of nematodes using staining techniques, and lowest limit Bx nematode mass determination for PCR detection. The procedure was undertaken on three adjoining 5‐mg wood cross‐sections, of 0.5 × 0.5 × 0.015 cm dimension, that were cut from a wood sample of 0.5 × 0.5 × 0.5 cm initially, then the larger wood sample was stained by acid fuchsin, from which two 5‐mg wood cross‐sections (that adjoined the three 5‐mg wood cross‐sections, mentioned above) were cut. Nematode‐staining‐spots (NSSs) in each of the two stained sections were counted under a microscope at 100× magnification. If there were eight or more NSSs present, the adjoining three sections were used for PCR assays. The B. xylophilus– specific amplicon of 403 bp ( DQ855275 ) was generated by PCR assay from 100.00% of 5‐mg wood cross‐sections that contained more than eight Bx NSSs by the PCR assay. The entire sampling procedure took only 10 min indicating that it is suitable for the fast estimation of nematode numbers in the wood of P. massonina as the prelimary sample selections for other more expensive Bx‐detection methods such as PCR assay.     

收割机前部扩充配件对降低油菜收获损失的作用（摘选）

如今,伊朗油菜种植已经在其国内各地发展起来。然而,在整地、种植和收获过程中仍然存在一些问题。因此,需要采用新技术进行机械化收获。目前,谷物联合收获机生产公司除了生产常用设备,也生产一些安装在割台上的扩充配件。机械化收获系统尤其是常用的收获割台存在有相当大的损耗,同时熟练程度和需要特殊的油菜收获配套设备也是造成损失的原因之一。该试验研究一种割台和两种割台扩充配件对油菜收获损失的影响,从而确定损失量以及造成损失的原因。试验中涉及到一种常见割台,以及伊朗制造的采用机械侧刀切割器的Hamed割台扩充配件和采用液压侧刀切割器的Bizo割台扩充配件。试验采用随机完全区组设计,设6次重复。利用安置的托盘测定收获损失量。结果表明,随着割台运禾螺杆与切割器间距离的加大,割台扩充配件能降低损失量。因此,从总损失量考虑,常用割台与其他两种扩充配件相比差异显著。普通割台损失量为599 kghm2,而采用侧面垂直切割可以减少71 kghm2。此外,使用液压系统替代机械系统以及使用双层切割器替代单层刀杆都有助于降低损失量。试验结果显示,破损种子量为39.6 kghm2,占总产量的1.12%。试验结果是令人满意的,同时改善了联合收获机的性能。通过使用割台扩充配件有利于降低收获中的损耗。