Inheritance of Aluminum Tolerance and its Effects on Grain Yield and Grain Quality in Oats (Avena Sativa L.)

Summary Aluminum toxicity due to the cation Al⁺³ is a major factor limiting yields in acid soils. Wide genetic variability to aluminum tolerance is found in oat genotypes. The objectives of this study were to determine the number of genes controlling aluminum tolerance in oats and to verify if any detrimental effects were present of the aluminum tolerance genes on grain yield and grain quality in Al⁺³free soils. Aluminum tolerance was estimated as the average regrowth of the main root after exposure to toxic levels of Al⁺³ in a hydroponic solution under controlled conditions. The number of genes controlling that trait was estimated from the distribution of the average root regrowth frequencies in a population of 333 recombinant inbred lines (RIL's) in generations F_5:6 and F_5:7. The effects on grain yield and grain quality were assessed in a subpopulation of 162 RIL's chosen based on their aluminum tolerance response. Aluminum tolerance in the evaluated population was controlled by one dominant major gene with the tolerant genotypes carying Al _a Al _a and the sensitive ones al _a al _a alleles. No detrimental effects of the Al _a allele on grain yield or grain quality were detected.Part of the Master of Science dissertation of the first author     

Rubber tree early selection for yield stability in time and among locations

Rubber production in the rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Muell. Arg.] can be expressed differently in different environments. Thus the objective of the present study was to select productive progenies, stable and responsive in time and among locations. Thirty progenies were assessed by early yield tests at three ages and in three locations. A randomized block design was used with three replications and ten plants per plot, in 3 × 3 m spacing. The procedure of the mixed linear Reml/Blup model—restricted maximum likelihood/best non-biased linear prediction was used in the genetic statistical analyses. In all the individual analyses, the values observed for the progeny average heritability ( $ \hat{h}_{pa}^{2} $ ) were greater than those of the additive effect based on single individuals ( $ \hat{h}_{a}^{2} $ ) and within plot additive ( $ \hat{h}_{ad}^{2} $ ). In the joint analyses in time, there was genotype × test interaction in the three locations. When 20 % of the best progenies were selected the predicted genetic gains were: Colina G_G = 24.63 %, Selvíria G_G = 13.63 %, and Votuporanga G_G = 25.39 %. Two progenies were among the best in the analyses in the time and between locations. In the joint analysis among locations there was only genotype × location interaction in the first early test. In this test, selecting 20 %, the general predicted genetic gain was G_G = 25.10 %. Identifying progenies with high and stable yield over time and among locations contributes to the efficiency of the genetic breeding program. The relative performance of the progenies varies depending of the age of early selection test.     

Phenolic, polysaccharidic, and lipidic fractions of mushrooms from northeastern Portugal: chemical compounds with antioxidant properties

Mushrooms do not constitute a significant portion of the human diet, but their consumption continues to increase due to their functional benefits and presence of bioactive compounds. Some of those compounds can be found in the phenolic, polysaccharidic, and lipidic fractions of edible and inedible species. Herein, those fractions of five wild mushrooms (Coprinopsis atramentaria, Lactarius bertillonii, Lactarius vellereus, Rhodotus palmatus, and Xerocomus chrysenteron) from northeastern Portugal were studied for their chemical composition and antioxidant properties. Protocatechuic, p-hydroxybenzoic, p-coumaric, and cinnamic acids were found in the phenolic fraction; rhamnose, xylose, fucose, arabinose, fructose, glucose, manose, mannitol, sucrose, maltose, and trehalose were quantified in polysaccharidic fraction; and linoleic and stearic (only in Lactarius sp.) acids, and β- and γ-tocopherols were the main compounds in the lipidic fraction. C. atramentaria and X. chrysenteron phenolic fractions gave the highest free radical scavenging activity, reducing properties, and lipid peroxidation inhibition in brain homogenates, which is in agreement with its highest content in total phenolics. Furthermore, among the polysaccharidic fractions C. atramentaria also gave the highest antioxidant activity, which is in agreement with its highest total polysaccharides content and sugars obtained after hydrolysis.     

Voltammetric determination of the antioxidant capacity in wine samples using a carbon nanotube modified electrode

A direct determination of gallic acid was achieved at a carbon paste electrode modified with carbon nanotubes under differential pulse voltammetry conditions. The values obtained for gallic acid were used to estimate the antioxidant properties of the wine sample based on gallic acid oxidation. The proposed method is based on the gallic acid oxidation process at a modified carbon paste electrode (MCPE) containing 30% (m/m) of carbon nanotubes monitored at 0.35 V versus Ag/AgCl (KCl 3 mol L(-1)). Using the optimized experimental conditions, the calibration curve for gallic acid was linear in the concentration range from 5.0 × 10(-7) to 1.5 × 10(-5) mol L(-1) with a detection limit of 3.0 × 10(-7) mol L(-1). The MCPE was successfully applied for the determination of the antioxidant capacity for red and white wine samples without interference of glucose and ascorbic acid, and the obtained results were compared with the standard spectrophotometric method.     

Characterization of the anthracnose resistance gene present in Ouro Negro (Honduras 35) common bean cultivar

Ouro Negro (Honduras 35) is a highly productive Mesoamerican black seeded bean cultivar that possesses a major dominant gene conferring resistance to anthracnose (causal organism Colletotrichum lindemuthianum). In this work the anthracnose resistance gene present in Ouro Negro was characterized by studying allelic relationships to the following previously characterized anthracnose resistance genes (cultivars): Co-1 (MDRK), Co-1 ² (Kaboon), Co-1 ³ (Perry Marrow), Co-2 (Cornell 49-242), Co-3 (Mexico 222), Co-4 (TO), Co-4 ² (SEL 1308), Co-5 (SEL1360), Co-6 (AB 136), and the resistance genes present in PI 207262 and Widusa. In addition, we determined the resistance spectrum of Ouro Negro in relation to 19 pathotypes of C. lindemuthianum. The allelism tests confirmed that the dominant anthracnose resistance gene present in Ouro Negro is positioned at a locus distinct from those with which it was compared. We propose that this new gene be named Co-10. The inoculation of Ouro Negro with the 19 pathotypes of C. lindemuthianum demonstrated that Co-10 confers resistance to pathotypes 23, 64, 67, 73, 81, 83, 87, 89, 95, 102, 117, 119, 343, 453, 1033, 1545 and 1600. The identification of Co-10 is an important contribution to bean breeding programs that are in constant need of new sources of resistance to anthracnose. This revised version was published online in July 2006 with corrections to the Cover Date.     

A logistic analysis of the factors determining the decision of smallholder farmers to intercrop: A case study involving rubber–tea intercropping in Sri Lanka

The factors influencing the decision of smallholder farmers to adopt new farming technologies were studied with reference to rubber–tea intercropping in Sri Lanka. Rubber–tea intercropping has been recommended previously to rubber farmers as a means to improve productivity and income during the early pre-tapping phase of rubber growth. Although crop trials have shown that the two crops are agronomically compatible and potentially produce a combined economic yield superior to the yield of a sole crop grown on the same area of land, there is little evidence of widespread adoption of this practice among smallholder farmers in Sri Lanka. The aim of the study was to determine the major factors that influence the decision to undertake rubber–tea intercropping and to construct a predictive model that describes the likelihood of adoption of intercropping by traditional smallholder rubber growers. A rapid rural appraisal (RRA) was undertaken based on semi-structured interviews of 90 smallholder farmers in the main rubber growing low wet zone of Sri Lanka. Among a number of factors shown to significantly influence the decision to intercrop tea with rubber, three were shown to operate independently, namely level of income, source of income (i.e. solely from own farm or from farm plus additional off-farm enterprises), and availability of land considered suitable for tea cultivation. A statistical model developed through correlation and logistic analysis, which predicts the likelihood of a smallholder adopting intercropping based on these factors, is presented and discussed. The most likely combination of circumstances (82% probability) under which rubber–tea intercropping is practiced is shown to be where the farmer’s income is greater than Rs. 10,000 per month, where the farmer’s income is based solely on own farm enterprises, and where more than 80% of the farmer’s land area was judged to be suitable for tea cultivation. Conversely, 30% of smallholder farmers that chose not to intercrop did possess land suitable for tea cultivation. Qualitative responses to the RRA indicated that limitation of technical knowledge was the main problem subsequently faced by rubber farmers who had adopted rubber–tea intercropping. Results indicate that there is need for both income support through farm subsidies and further agricultural extension services, if rubber–tea intercropping is to be adopted more widely in Sri Lanka. The wider usefulness of the developed logistic model in determining the likelihood of adoption of intercropping by smallholder farmers is discussed.     

Steam explosion pretreatment used to remove hemicellulose to enhance the production of a eucalyptus organosolv dissolving pulp

The steam explosion (SE) pretreatment associated with the organosolv process was investigated to produce dissolving pulp from eucalyptus. Prehydrolysis Kraft (PHK) pulping was also done to produce viscose and acetate grade pulps as reference. The organosolv pulps were delignified in two steps with sodium chlorite. Viscose and acetate grade PHK pulps were bleached by OD₀(EH)D₁P and OD₀(EP)D₁PCCE sequences, respectively. Dilute acid-catalyzed (with acid addition) SE pretreatment dissolved more xylan than auto-catalyzed (no acid addition) SE pretreatment. Steam-exploded unbleached organosolv pulps showed lower residual lignin content and screened yield than unbleached organosolv pulps without SE pretreatment. Steam explosion pretreatment helped to decrease lignin content and damaged fiber length of unbleached organosolv pulps. The 1.0% H₂SO₄ organosolv pulp (organosolv dissolving pulp at bioconversion conditions) showed the highest reactivity. Even showing low viscosity for some applications, in general, the organosolv dissolving pulps produced in this study can be used for making lyocell fibers.     

Severity of Xanthomonas axonopodis leaf blight on eucalypt cuttings under different levels of nutrients

Bacterial leaf blight of eucalypt, caused by Xanthomonas axonopodis, occurs mainly in forest nurseries, but also affects young plants in the field. Avoidance of leaf wetness for long periods of time over the whole nursery and using drip irrigation for clonal hedges are, currently, the most effective measures for controlling bacterial leaf blight on eucalypt. However, as these techniques are very costly, alternative management measures are required. We hypothesized that the management of mineral nutrients could reduce disease severity on eucalypts. To examine this hypothesis, rooted cuttings of Eucalyptus urophylla × E. grandis were irrigated with nutrient solutions containing different concentrations of copper (Cu), boron (Bo), potassium (K), calcium (Ca) and nitrogen (N) before inoculation with X. axonopodis 30 days after starting the nutrient solution treatments. Concentration of K higher than that recommended, commonly used in miniclonal hedges, reduced the severity of bacterial leaf blight. However, disease severity increased with an increasing of N/K ratio. The management of mineral nutrition solution, especially K, has great potential for integrated disease management of X. axonopodis in eucalypt nurseries.     

Nitrogen dynamics during ecosystem development in tropical forest restoration

We considered whether ecological restoration using high diversity of native tree species serves to restore nitrogen dynamics in the Brazilian Atlantic Forest. We measured δ¹⁵N and N content in green foliage and soil; vegetation N:P ratio; and soil N mineralization in a preserved natural forest and restored forests of ages 21 and 52 years. Green foliage δ¹⁵N values, N content, N:P ratio, inorganic N and net mineralization and nitrification rates were all higher, the older the forest. Our findings indicate that the recuperation of N cycling has not been achieved yet in the restored forests even after 52 years, but show that they are following a trajectory of development that is characterized by their N cycling intensity becoming similar to a natural mature forest of the same original forest formation. This study demonstrated that some young restored forests are more limited by N compared to mature natural forests. We document that the recuperation of N cycling in tropical forests can be achieved through ecological restoration actions.