Assessment of Bacterial and Fungal Aerosol in Different Residential Settings

The concentration and size distribution of bacterial and fungal aerosol was studied in 15 houses. The houses were categorized into three types, based on occupant density and number of rooms: single room in shared accommodation (type I), single bedroom flat in three storey buildings (type II) and two or three bedroomed houses (type III). Sampling was undertaken with an Anderson six-stage impactor during the summer of 2007 in the living rooms of all the residential settings. The maximum mean geometric concentration of bacterial (5,036 CFU/m³, ± 2.5, n?=?5) and fungal (2,124 CFU/m³, ± 1.38, n?=?5) aerosol were in housing type III. The minimum levels of indoor culturable bacteria (1,557 CFU/m³, ±1.5, n?=?5) and fungal (925 CFU/m³, ±2.9, n?=?5) spores were observed in housing type I. The differences in terms of total bacterial and fungal concentration were less obvious between housing types I and II as compared to type III. With reference to size distribution, the dominant stages for culturable bacteria in housing types I, II and III were stage 3 (3.3–4.7 μm), stage 1 (7 μm and above) and stage 5 (1.1–2.1 μm), respectively. Whereas the maximum numbers of culturable fungal spores were recovered from stage 2 (4.7–7 µm), in housing type I, and from stage 4 (2.1–3.3 μm) in both type II and III houses. The average geometric mean diameter of bacterial aerosol was largest in type I (4.7 μm), followed by type II (3.89 μm) and III (1.96 μm). Similarly, for fungal spores, type I houses had the highest average mean geometric diameter (4.5 μm), while in types II and III the mean geometric diameter was 3.57 and 3.92 μm, respectively. The results indicate a wide variation in total concentration and size of bioaerosols among different residential settings. The observed differences in the size distributions and concentrations reflect their variable airborne behaviour and, as a result, different risks of respiratory exposure of the occupants to bioaerosols in various residential settings.     

Dynamic oxygen mapping in the root zone by fluorescence dye imaging combined with neutron radiography

Purpose  

The rooted zone of a soil, more precisely the rhizosphere, is a very dynamic system. Some of the key processes are water uptake and root respiration. We have developed a novel method for measuring the real-time distribution of water and oxygen concentration in the rhizosphere as a biogeochemical interface in soil. This enables understanding where and when roots are active in respect to root respiration and water uptake and how the soil responds to it.     

NUTRIENT UPTAKE,PHYSIOLOGICAL RESPONSES,AND YIELD ATTRIBUTES OF WHEAT (TRITICUM AESTIVUM L.) EXPOSED TO EARLY AND LATE DROUGHT STRESS

The response of different wheat cultivars to drought imposed after three and six weeks of seedling emergence was evaluated in the wire house. The seeds of recommended local wheat cultivars were sown in plastic pots. The drought stress decreased the water relation, nutrient uptake and grain yield of all the wheat cultivars. The early drought stress significantly reduced the nitrogen (N) uptake by 38% while late drought stress decreased nitrogen uptake by 46%. The phosphorus (P) and potassium (K) uptake were decreased by 49% and 37% under early drought stress, respectively while their uptake was decreased by 51% each under late drought stress. Grain yield was reduced by 24% under early drought stress while it was reduced by 60% under late drought stress. Water deficit at early growth stages reduced grain weight by 10% while it was reduced by 35% under water deficit at later stages of growth.     

Nutrients management strategies to improve yield and quality of sugar beet in semi-arid regions

The objective of this study was to evaluate the effects of organic and inorganic fertilizers on the yield and quality of sugar beet genotypes (Beta vulgaris L.). Therefore, a field trial was carried out in Peshawar, Pakistan, during the winters in 2012–2013. The field experiment was conducted in a randomized complete block design with split plots, having three replications. Fertilizer treatments (control, composted manure Higo Organic Plus at 5 t ha^?1, Maxicrop Sea Gold seaweed extract at 5 L ha^?1, farm yard manure at 10 t ha^?1, inorganic nitrogen–phosphorus (NP) at 90:60 kg ha^?1, NP at 120:90 kg ha^?1 and NP at 150:120 kg ha^?1) were allotted to main plots, while genotypes (Sandrina, Serenada and Kawe Terma) were allotted to the sub-plots. Plots treated with the application of NP at 120:90 kg ha^?1 produced the highest beet yield (76.4 t ha^?1) and sugar yield (11.1 t ha^?1), and had the second highest polarizable sugar content (14.52%) and more economic return (Rs. 553,000 per hectare) as compared to control plots. Sugar beet genotype Serenada had significantly higher beet yield (55.5 t ha^?1) and sugar yield (7.9 t ha^?1) and a higher economic return (Rs. 380,000 per hectare) than the other genotypes. Sugar beet genotype Serenada supplied with NP at 120:90 kg ha^?1is recommended for the general cultivation in the agro-climatic conditions of Peshawar valley.     

Biochar-induced changes in soil properties affected immobilization/mobilization of metals/metalloids in contaminated soils

Purpose

Remediation of metal contaminated soil with biochar is attracting extensive interest in recent years. Understanding the significance of variable biochar properties and soil types helps elucidating the meticulous roles of biochar in immobilizing/mobilizing metals/metalloids in contaminated soils.

Materials and methods

Six biochars were produced from widely available agricultural wastes (i.e., soybean stover, peanut shells and pine needles) at two pyrolysis temperatures of 300 and 700 °C, respectively. The Pb-, Cu-, and Sb-contaminated shooting range soils and Pb-, Zn-, and As-contaminated agricultural soils were amended with the produced biochars. The mobility of metals/metalloids was assessed by the standard batch leaching test, principal component analysis and speciation modeling.

Results and discussion

The changes in soil properties were correlated to feedstock types and pyrolysis temperatures of biochars based on the principal component analysis. Biochars produced at 300 °C were more efficient in decreasing Pb and Cu mobility (>93 %) in alkaline shooting range soil via surface complexation with carboxyl groups and Fe-/Al-minerals of biochars as well as metal-phosphates precipitation. By contrast, biochars produced at 700 °C outperformed their counterparts in decreasing Pb and Zn mobility (100 %) in acidic agricultural soil by metal-hydroxides precipitation due to biochar-induced pH increase. However, Sb and As mobility in both soils was unfavorably increased by biochar amendment, possibly due to the enhanced electrostatic repulsion and competition with phosphate.

Conclusions

It is noteworthy that the application of biochars is not equally effective in immobilizing metals or mobilizing metalloids in different soils. We should apply biochar to multi-metal contaminated soil with great caution and tailor biochar production for achieving desired outcome and avoiding adverse impact on soil ecosystem.

     

Acidulated activation of phosphate rock enhances release,lateral transport and uptake of phosphorus and trace metals upon direct-soil application

Phosphate rock (PR) was activated via acidulation with HCl, EDTA, and oxalic acid to enhance its reactivity. The release, lateral transport, and uptake of phosphorus (P) along with trace metals from pristine and activated PRs were investigated in a soil micro-block system over a period of 27 days, using wheat (Triticum aestivum L.) plants. Significantly (p < 0.05) higher amounts of available soil P, Fe, Mn, and Zn were released from all the PRs after application to soil within first 9 days of seedling transplantation, while the release of other trace metals (Cd, Co, Cr, Cu, Ni, and Pb) was minimal (<1.2 mg kg^?1). On cumulative basis, APR-O (oxalic acid activated PR) was the most efficient amendment releasing 164% more available P, followed by APR-E (EDTA activated PR) releasing 130% more available P, compared to the pristine PR. Similar results were also observed in the release of available Fe, Mn, Zn, and other trace metals. The highest diffusive mass fluxes for available P, Mn, Fe, and Zn in soil were observed after 3 days of seedling transplantation, which reduced subsequently. The uptake of P, Fe, Mn, and Zn by wheat plants was increased by 394%, 715%, 92%, and 91%, respectively, in APR-O application compared to the pristine PR, while it was increased by 280%, 188%, 16%, and 27%, respectively, in APR-E application compared to the pristine PR. Subsequently, APR-O and APR-E amendments resulted in enhanced shoot lengths, root lengths, shoot dry matter, and root dry matter contents of wheat plants. Hence, it was concluded that activation of PR with oxalic acid and EDTA prior to direct soil application may enhance the reactivity of PR and could serve as a cost-effect fertilization strategy for higher wheat crop production.     

Review of Trends in Strawberry Research from 1960 to 2016

A review of publications on “Strawberry” was done by using the Scopus database for the period 1960–2016. A total of 10,400 articles were found in the database and analyzed using a variety of measures. Results show that publication increased exponentially from 1960 to 2016. Multiple authors are collaborating in strawberry research. Acta Horticulturae was the most productive journal. The United States of America was the most productive country. The greatest portion of the research was concerned with medicinal benefits of strawberries to humans. This work will be useful to researchers in identifying trends in strawberry research.