无锡茶园不同修剪模式对茶小绿叶蝉发生量的影响

为优化春茶后茶园修剪模式,提高小绿叶蝉控制率,对福鼎大毫和福鼎大白进行不同修剪时间和不同修剪高度的比较,综合结果显示,福鼎大毫以4月28日修剪高度45 cm,小绿叶蝉总控制率最高;福鼎大白以5月25日修剪高度45 cm,小绿叶蝉总控制率达到最高.     

水稻突变体W33高位分蘖特性利用价值研究

为探讨水稻突变体材料W33高位分蘖特性在水稻育种上的利用价值。以野生型水稻恢复系R818及其高节位分蘖突变体W33为试验材料,用盆栽试验研究R818和W33的植株、分蘖和穗部性状差异,用大田栽培控制性试验比较R818和W33分蘖、产量构成性状及子粒产量差异,测得参试材料各性状数据。结果表明,生长前期W33和R818株高、主茎叶均长无明显差异,中后期二者株高、主茎叶均长渐显显著或极显著差异;W33单株平均分蘖数是R818的7.5~8.8倍,平均有效穗数是R818的8.6倍,分蘖平均成穗率与R818相当,但单穗穗长、枝梗数和着粒数明显低于R818,而千粒重与R818无明显差异;W33和R818单株籽粒产量均随密度增大而降低,并以最低密度条件下最高,最高密度条件下最低;尽管W33单穗产量明显低于R818,但在相同栽插密度条件下,W33和R818群体产量差异不显著(F=3.7868<F_0.05,1,4);在一定密度范围内,W33能充分发挥其旺盛的分蘖力和较高的成穗率优势,以弥补单穗产量较低的缺陷,其群体产量最终达到与R818相当的水平。说明W33旺盛的分蘖力和较高的分蘖成穗率特性在水稻育种上具有一定的利用价值。     

新疆‘晚丰’巴旦木花粉萌发培养基组分的筛选

为提高人工授粉中巴旦木的产量,本研究采用花粉离体培养法,筛选新疆‘晚丰’巴旦木品种花粉萌发中不同培养基组分的配方施用量,研究不同培养基配方组分对花粉萌发的影响。实验中在培养基内添加尿素、硼酸、氯化钙、吲哚乙酸、赤霉素和蔗糖,均能促进花粉萌发和花粉管生长,在一定范围内,花粉萌发率和花粉管长度均随培养基配方组份量的增加而增加,但超过一定添加量时,促进作用逐渐减弱并出现抑制作用。研究结果显示:添加0.1%尿素、0.01%硼酸、0.005%氯化钙、0.0001%吲哚乙酸、0.0015%赤霉素和10%蔗糖时,新疆‘晚丰’巴旦木品种花粉萌发率最高,花粉管长度也达到最大值。本研究结果为实践生产中人工授粉和相关研究提供参考和理论依据,也为进一步顺利进行亲和授粉研究提供前期理论基础。     

无花果品系威紫在威远县的引种表现及栽培技术

2016年2月,威远县从中国农业大学引进无花果品系威紫,经过4年的试验种植表明,该品系在当地表现良好,弥补了缺乏紫黑色果皮鲜食品系的不足。果实长卵形,果面光洁,果皮紫黑色、韧性好,果肉无中空、浅红色,平均单果重45.8g,最大80g,含糖量15.6%,含酸量0.2%,果实始熟期7月中旬,成熟期持续到10月下旬,果实发育期84~91天,定植第3年进入盛产期,每666.7m^2产量1500kg左右,丰产性较强,果实品质佳,商品性好,可作为优良鲜食无花果品系在川渝地区推广。     

菌材伴栽与天麻高产栽培技术研究

菌材伴栽与培育栽培天麻法与室外林地常规田字格栽培法、菌材+枝条栽培法、双层菌材栽培法和单层菌材栽培法比较,菌材伴栽法能显著提高天麻产量、生物效益、产值和投入产出比等各项经济技术指标,减少了菌材提前培育过程。该方法实用性强,具有应用和推广价值。     

Reproductive performance,survival and development of nauplii and copepodites,sex ratio and adult life expectancy of the harpacticoid copepod,Euterpina acutifrons,fed different microalgal diets

A series of laboratory experiments were conducted on the harpacticoid copepod, Euterpina acutifrons, to assess the influence of 10 different microalgal diets (four monoalgal and six mixed algal diets) on several parameters related to its productivity in culture. The four monoalgal diets were the Tahitian strain of Isochrysis sp. (T‐Iso), Pavlova salina (Pav), Tetraselmis chuii (Tet) and the diatom Chaetoceros muelleri (Chaet), the five binary diets were T‐Iso+Tet, Pav+Tet, T‐Iso+Pav, Tet+Chaet and Pav+Chaet, while the tri‐algal diet was T‐Iso+Tet+Pav. All diets were fed to copepods at 1500 μ gC L^?1 and in the case of binary or trialgal diets, carbon concentration was divided equally between the two or three algae offered. Among monoalgal diets, the diatom Chaet was excellent for E. acutifrons. Out of the 10 diets tested, the binary diet Tet+Chaet, which contained the diatom Chaet, was the best for naupliar production of single pair E. acutifrons (19.5±1.7 nauplii female^?1 day^?1), significantly (P<0.05) higher than all other treatments except for the Chaet treatment (P>0.05). Similarly, in the group naupliar production trial (50 adult E. acutifrons per replicate), Tet+Chaet produced a significantly higher number of nauplii (405.8±18.6 nauplii day^?1) than the other treatments (P<0.05). Tet+Chaet further supported the highest naupliar survival (82.0±2.8%) and copepodite survival (89.0±2.8%), while the mono‐algal diet Chaet produced the second highest naupliar (76.7±2.6%) and copepodite survival (83.5±2.6%). In contrast, Pav produced the lowest overall survival at the naupliar stage (30.0±2.9%), significantly lower than all other treatments (P<0.05). While development from newly hatched nauplii to copepodites was not significantly affected by diets, mean development time from nauplius to adult was significantly different among treatments. Mean development time from hatching (naupliar I stage; NI) to the adult stage was the fastest with Tet+Chaet and Chaet (6.8±0.0 days for both treatments), which was significantly faster than that of Pav, T‐Iso Pav+Tet and T‐Iso+Pav+Te treatment (P<0.05). E. acutifrons sex ratio was significantly affected by diets, and always skewed in favour of males. Feeding on Pav resulted in the lowest proportion of females (23.7±1.2%), significantly lower than for six of the other treatments (P<0.05). Adult females had longer average life expectancy than males for all treatments, and were the longest when fed Tet+Chaet (9.5±0.4 days), which was more than twice as long as the shortest lifespan recorded for the Pav treatment (4.2±0.6 days) (P<0.05). In summary, among 10 diets tested, the binary diet Tet+Chaet appeared to support the highest culture productivity of E. acutifrons while the diatom Chaet also performed well as a monoalgal diet.     

牧场土壤含水率与坚实度空间变异与相关性分

利用土壤水分/圆锥指数复合测量装置,应用精细农作技术体系网格定点测量与GPS定位,在一块面积约1.27 hm2的草地上获取了土壤含水率与坚实度空间分布基础数据,并针对采样过程中出现的数据缺失,用偏最小二乘法对数据进行修补.然后运用克里格插值法进行数字化成图,并在此基础上分别对含水率与坚实度的空间变异性及两者的相关性做了分析.     

数控螺旋锥齿轮磨齿机机床加工误差补偿

根据螺旋锥齿轮齿面的数学模型,对轮齿曲面进行了离散化处理.运用矢量运算的方法,给出了齿面离散点径矢及其法矢的计算方法.基于螺旋锥齿轮切齿计算得到的比例修正参数以及砂轮可任意修形的特点,建立了一种基于比例修正参数和砂轮参数,对机床加工误差进行补偿的方法,运用最优化算法可得到各种比例修正参数的修正倍数以及砂轮参数的改变量.通过实际的磨齿加工、齿形误差的测量以及机床调整参数的补偿,验证了机床加工误差补偿方法的正确性.