Ascorbic acid oxidation in sucrose aqueous model systems at subzero temperatures

The reduction of Tempol by ascorbic acid in concentrated sucrose solutions was measured by electron paramagnetic resonance (EPR) at temperatures ranging from 16 to -16 degrees C. This method allowed the determination of the rate constants (k) of this fast reaction, by recording the Tempol reduction as a function of time. The two reactants were initially separated and had to migrate for the reaction to occur. The experimental findings were compared with predicted values according to the equation for diffusion-controlled reaction proposed by Atkins. The experimental reaction rate constants were observed to be lower than the calculated ones. However, the experimental values were found to be controlled by the temperature and viscosity changes of the reaction media, as expected for a diffusion-controlled reaction.     

Pesticide residues in heterogeneous plant populations, a model-based approach applied to nematicides in banana (Musa spp.)

Nematicides are widely used to control plant-parasitic nematodes in intensive export banana (Musa spp.) cropping systems. Data show that the concentration of fosthiazate in banana fruits varies from zero to 0.035 g kg-1, under the maximal residue limit (MRL=0.05 mg kg-1). The fosthiazate concentration in fruit is described by a Gaussian envelope curve function of the interval between pesticide application and fruit harvest (preharvest interval). The heterogeneity of phenological stages in a banana population increases over time, and thus the preharvest interval of fruits harvested after a pesticide application varies over time. A phenological model was used to simulate the long-term harvest dynamics of banana at field scale. Simulations show that the mean fosthiazate concentration in fruits varies according to nematicide application program, climate (temperature), and planting date of the banana field. This method is used to assess the percentage of harvested bunches that exceed a residue threshold and to help farmers minimize fosthiazate residues in bananas.     

A retrospective study of 30 cases of frozen lamellar corneal graft in dogs and cats

Frozen lamellar corneal grafts and nictitating membrane flaps were used in 18 dogs and 12 cats to repair deep corneal defects. In all dogs either melting corneal ulcers or descemetoceles were present. In the 12 cats, nine had either a melting corneal ulcer or descemetocele, two animals had acute bullous keratopathy, and one cat had corneal sequestrum. Initial vascularization with gradual clearing of the graft occurred during the first 45 days postoperatively. At 60 days postoperatively, all eyes were visual. Frequent postoperative complications included: focal dehiscence of the wound ( n  = 9); melting of part of the graft ( n  = 7); and pigmentation of the graft ( n  = 4). The frozen lamellar corneal graft was a very safe technique, and restored the tectonic and the optical function of the cornea. It provided the best results in corneas with nonperforating corneal defects. This technique provides poorer results when the cornea was perforated prior to surgery or during the surgical procedure.     

Triacylglycerol analysis for the quantification of cocoa butter equivalents (CBE) in chocolate: feasibility study and validation

A new European legislation (2000/36/CE) has allowed the use of vegetable fats other than cocoa butter (CB) in chocolate up to a maximum value of 5% in the product. The vegetable fats used in chocolate are designated as cocoa butter replacements and are called cocoa butter equivalents (CBE). The feasibility of CBE quantification in chocolate using triacylglycerol (TAG) profiles was conducted by analyzing 55 samples of CBs and 31 samples of CBEs using a liquid chromatograph equipped with an evaporative light scattering detector (HPLC-ELSD). Statistical evaluation of the data obtained has been performed, and a simulation study has been carried out to assess the viability to use this method for quantifying the amount of CBE in real mixtures and in chocolates. The TAGs POP, POS, PLS, and the ratios POP/PLS, POS/PLP (P, palmityl; O, oleyl; S, stearyl; L, linoleyl) are particularly significant to discriminate between CB and CBE. Analysis of 50 mixtures between 5 different CBEs and 10 different CBs at 2 different concentration levels is presented. The data are visualized and interpreted. A mathematical model has been developed to assess the amount of CBE in real mixtures. This predictive model has been successfully applied and validated on dark chocolates including authorized CBE. The results are affected by +/-2.1% absolute average error. In particular, estimations between 10 and 20% of CBE show a very good match. On the other hand, values equal to or smaller than 5% show a larger prediction error (detection limit of the method). For the main purpose of this method (i.e., quantification of CBE at 5% max in chocolate, which represents about 15% of the total fat) this model shows very good results. For milk chocolate, the mathematical model can also be used if TAG are integrated from partition number (PN) 46 to 54. Consequently, the model proposed provides sufficient information to verify the real application of the European legislation.     

Copper Accumulation in a Reservoir Ecosystem Following Copper Sulfate Treatment (St. Germain Les Belles, France)

Copper sulfate (CuSO₄) addition to freshwater for phytoplankton control has been practiced for decades, and remains the most effective algicidal treatment for numerous managed water bodies. A reservoir in the centre of France was the site for an investigation of copper distribution in aquatic systems after a copper sulfate treatment. Results of monitoring showed a rapid conversion of dissolved Cu to particulate forms, with significant accumulation in the sediments. Total sediment Cu content increased from approximately 37.7 to 45.4 μg g^-1 dry weight after the first treatment. Sequential extraction suggested that a significant portion of the sediment-borne Cu was associated with the organic fraction which may release Cu to the water column, although significant release would occur only under extreme changes in water chemistry. Based upon measured Cu concentrations, flows at the down-stream water, and known mass applied during treatment, mass balance calculations indicated that approximately 17% of the Cu was exported from the reservoir over a 70 day period following a 196 μg L^-1 Cu²⁺ (as CuSO₄·5H₂O) treatment.Copper bioaccumulation by a moss, Fontinalis antipyretica in the down-stream water showed that it was possible to distinguish between a treated and an untreated area. The impact of copper treatmentin the down-stream reservoir could be followed using mosses. There is a distance effect which could be exploited to determine potential copper impact for example. The largest amount of copper was probably adsorbed on downstream sediment or lost in running water. Thirty days after copper sulfate addition, Fontinalis still indicatedcopper exposure.     

Harmonisation, standardisation for soil and sediment fractionation studies, and usefulness in assessment and risk management

Single and sequential extraction procedures are often used to study the environmental fate of trace elements from soils and sediments. Although these schemes are quite popular, they are prone to various sources of errors, which require them to be thoroughly controlled. Owing to their operationally-defined character, the only way to compare analytical data is to stick closely to procedures that have been collaboratively studied and written in the form of an operating protocol. Groups of scientists have hence developed ‘harmonised’ procedures that are used as a reference for fractionation studies. A higher level is the formal standardisation of the procedures by official standardisation bodies, which also fulfils the need for achieving the comparability of data obtained by different laboratories from different countries. This paper discusses aspects of harmonisation (consensus obtained by groups of scientists) and standardisation (adoption of standards as mandated by an international organisation) as applied to single and extraction schemes for trace element fractionation studies, including quality control aspects.     

Evaluation of Compost Maturity,Hydrophysical and Physicochemical Properties: Indicators for Use as a Component of Growing Media

The cocomposting of agricultural waste is a new management priority in Tunisia. In this study, four composts were evaluated by comparing the changes in measured hydrophysical and physicochemical properties and phytotoxicity. The organic wastes used were almond shell (AS), sesame bark (SB), olive husk (OH), and green and wood wastes (GW and WW, respectively). Composts CI and CII were composed of AS/SB and OH/SB, respectively, at a ratio of 75/25 (wet weight basis). CIII consisted of OH, SB and CAS (coarsely-ground almond shell used as a bulking agent) at a ratio of 55/25/20. Finally, CIV was composed of 25%SB+9%CAS+18%GW+48%WW. The composts studied were characterized by basic pH and an electric conductivity (EC) value ranging from 1.6 to 2.4 mS/cm. The organic matter contents (OM) and C/N ratios of composts ranged from 20 to 46% and from 10 to 21%, respectively. Based on hydrophysical analyses, composts CI, CIII and CIV, containing AS, were shown to have a porosity and a water content of 10-26% and 10-20%, respectively. The phytotoxicity of composts was studied on the basis of cress seed germination. Results revealed that differences in properties are mainly related to the nature of composted waste and that some of these composts are compatible for use as constituents in growing media for horticultural soilless cultures.     

Surrogate Correlations and Near-Infrared Diffuse Reflectance Sensing of Trace Metal Content in Soils

Near-infrared diffuse reflectance sensing (NIRS) of soils has been the object of considerable interest and research in the last few years. This has been motivated by the prospect that this method seems to provide a cheap, convenient alternative to conventional, time-consuming methods for the measurement of a wide range of soil parameters. In particular, various authors have advocated that NIRS could be used to measure rapidly and non-destructively the concentration of trace metals in surface soils. Correlation analyses between NIRS spectra and trace metal concentration have yielded inconclusive results to date, suggesting that trace metal concentration may belong to a class of “tertiary” soil parameters, linked to NIRS spectra through “surrogate”, or indirect, correlations, involving some other primary or secondary parameter like clay or organic matter content, to which NIRS spectra are very sensitive. To assess the validity of this surrogate correlation hypothesis in the case of trace metals, experiments were carried out with soil samples varying only in the amount of trace metals they contain. Field-aged Hudson and Arkport soil pots spiked with Cu and Zn, freshly spiked samples of the same soils, and samples of a metalliferous peat soil from Western New York naturally rich in Cd and Zn were subjected to NIRS under laboratory conditions. Detailed analysis indicates that the NIR spectrum is sensitive to sample handling, including the orientation of the samples in the NIRS instrument, but that, at the same time, there is no discernable effect of the presence of trace metals on any part of the NIR spectrum. These results provide strong experimental support to the hypothesis of “surrogate” correlation for trace metals, and indicate that trace metals, even in severely contaminated soils, should not interfere with the NIR sensing of primary or secondary parameters, like organic matter content. Further work is needed to determine if this feature of NIR spectra extends to other soil chemical parameters.