Contamination and browning in tissue culture of Platanus occidentalis L.

Twigs of 2–3-year-old Platanus occidentalis L. were used as experimental material to find the causes for the contamination and browning in the initial stages of tissue cultures. To compare the degree of browning of explants picked off from different growing seasons, the experimental material was excised from trees on each of the first ten days in January, March, May and July, 2006. The results indicated that the contamination and browning rates of the material cut off in January (14.2% and 30.6%, respectively) and March were somewhat lower than those in July. The pretreatment of soaking the explants in different anti-oxidants and absorbents at the same time could diminish some side effects. The pretreatment of using 10 g·L–1 vitamin C reduced the contamination and brown-ing rate effectively. An orthogonal experiment showed that the optimal factor and level arrangement is 0.5 mg·L–1 BA, 2.0 g·L–1 ac-tive carbon and 1.5 g·L–1 PVP which resulted in a browning rate of only 16.5%. In general, sampling period, physical properties and pretreatment of explants are the main factors responsible for the contamination and browning of material in the initial stages of P. occidentalis tissue cultures.     

Policies Affecting Forestry Entrepreneurship

Many demand and supply-side policies impede or foster forestry entrepreneurship. A study was conducted to consolidate existing knowledge on policies influencing forestry entrepreneurship in Finland, Norway, Japan, Australia, the Philippines and the USA, and to draw conclusions on these impeding and fostering factors. From the country studies it was difficult to find common structures on policies affecting forestry entrepreneurship. This is understandable because most policies in forestry are aimed at supporting sustainable forest management, wood production and ecological services of the forests rather than entrepreneurship as such. Despite the high variety of policies applied in the study countries, it can be concluded that strict public control on forests’ use and management potentially impedes forestry entrepreneurship. While these policies assist to correct market failure and to promote sustainability of forest management, they may also result into unnecessary and ineffective regulations that limit the opportunities for forestry entrepreneurship. A common feature promoting the demand for forestry entrepreneurship in some of the countries studied is the strong emphasis on forestry cooperatives, which were important institutions to support small-scale forestry entrepreneurship. In many study countries, different ad hoc programs are implemented to find new economic and entrepreneurial opportunities aside from the current use of wood and forests. Subsidies and tax incentives are commonly applied to reduce risks from making forestry investments or otherwise increase the economic return from timber production.     

Regional mixed-effects height–diameter models for loblolly pine (<Emphasis Type="Italic">Pinus taeda</Emphasis> L.) plantations

A height–diameter mixed-effects model was developed for loblolly pine (Pinus taeda L.) plantations in the southeastern US. Data were obtained from a region-wide thinning study established by the Loblolly Pine Growth and Yield Research Cooperative at Virginia Tech. The height–diameter model was based on an allometric function, which was linearized to include both fixed- and random-effects parameters. A test of regional-specific fixed-effects parameters indicated that separate equations were needed to estimate total tree heights in the Piedmont and Coastal Plain physiographic regions. The effect of sample size on the ability to estimate random-effects parameters in a new plot was analyzed. For both regions, an increase in the number of sample trees decreased the bias when the equation was applied to independent data. This investigation showed that the use of a calibrated response using one sample tree per plot makes the inclusion of additional predictor variables (e.g., stand density) unnecessary. A numerical example demonstrates the methodology used to predict random effects parameters, and thus, to estimate plot specific height–diameter relationships.     

First-year growth response of cold-stored,nursery-grown aspen planting stock

This research examined the first year growth characteristics of cold stored and transplanted nursery-produced aspen (Populus tremuloides) seedlings (container and bareroot (BR)) and compared it to the growth of seedlings that had not been transplanted (established from germinants in the field) and therefore had an unrestricted root system (UR). Prior to planting, nursery-produced seedlings were placed in cold storage (−3°C) and root growth potential (RGP) and total non-structural carbohydrate (TNC) root reserves were tested at 0, 10, 75 and after 150 (container) and 190 days (BR) of storage. Both container and BR stock had much lower root to shoot ratios (RSRs) and root carbohydrate reserves compared to UR seedlings after 170 days. During storage, root reserves in container stock declined faster than in the BR and UR seedlings. RGP in all nursery stock was the highest after 75 days of storage, while longer storage resulted in shoot dieback and reduced root growth. After the first growing season, UR seedlings were one tenth the size of the nursery stock; however, in the second growing season they had no stem dieback and grew twice the height and stem diameter. The higher RSRs and root reserves in the UR seedlings was likely caused by early bud set in its first year of growth. This suggests that inducing bud set earlier in the growing regime might allow seedlings to increase root mass and carbohydrate reserves.     

Radial variation of vessel size and distribution in cork oak wood (<Emphasis Type="Italic">Quercus suber</Emphasis> L.)

Quercus suber L. is an important species producing cork whose wood characteristics have not been investigated a lot. Cork oak wood vessels are a striking feature and the most abundant wood tissue largely influencing density and permeability. Vessel size and distribution were studied in approximately 40 year-old and never debarked cork oaks by continuously measuring along the radial direction in the transverse section of wood discs taken at 1.3 m of height using image analysis techniques. The vessel size increases with age from 7660 ± 2286 to 21136 ± 6119 μm², the conductive area from 5.4 ± 2.2 to 11.6 ± 3.9%, and the vessel density remains approximately constant between 5.2 ± 1.5 and 7.3 ± 3.5 vessels/mm². In comparison with ring-porous and some evergreen oaks, cork oaks show a similar conductive area but smaller vessels. Vessel architecture is known to play an important role on oaks tolerance to hydric stress, and these cork oak trees were growing under very harsh edaphoclimatic conditions, not tolerated by other oaks. The well-developed and deep root system allowing access to constant water supply may contribute to the cork oak’s relatively high conductive area.     

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).     

Crystalline structure of heat-treated Scots pine [<Emphasis Type="Italic">Pinus sylvestris</Emphasis> L.] and Uludağ fir [<Emphasis Type="Italic">Abies nordmanniana</Emphasis> (Stev.) subsp. <Emphasis Type="Italic">bornmuelleriana</Emphasis> (Mattf.)] wood

The aim of this study was to determine changes in crystallinity and crystalline unit cell type of heat-treated Scots pine (Pinus sylvestris L.) and Uludağ fir (Abies nordmanniana stev. subsp. bornmuelleriana Mattf.) wood samples by means of FT-IR spectroscopic method. Heat treatment was applied on the test samples in an oven at three different temperatures (120, 150, and 180°C) and for two different periods of time (6 and 10 h) under atmospheric pressure. It was designated that crystallinity of both Scots pine and Uludağ fir wood samples increased during heat treatment depending on the duration. However, monoclinic structure in crystalline unit cells of Scots pine and Uludağ fir wood samples converted to triclinic structure when heat treated. It was estimated that monoclinic structure was dominant in the crystalline unit cell. It was established that the crystalline structure of Scots pine wood samples was more affected by heat treatment than that of Uludağ fir wood samples.     

Plant diversity of secondary forests in response to anthropogenic disturbance levels in montane regions of northeastern China

The effects of anthropogenic disturbances on forest structure and plant diversity of secondary forest ecosystems were evaluated based on the classification by site factors in the montane regions of northeastern China. Forty-five sample plots containing 720 sub-plots of overstory species (8 m × 8 m), 1,440 quadrats of understory species (2 m × 2 m), and 1,440 quadrats of herbaceous layer species (1 m × 1 m) were clustered into five groups (G1, G2, G3, G4 and G5) by site variables with Hierarchical Cluster Analysis. Meanwhile, the disturbance levels corresponding to the five groups were determined according to the factors influencing human disturbances (D0-G2, D1-G1, D2-G3, D3-G5, and D4-G4). Species diversities of overstory, understory, herbaceous layer and overall species were evaluated using species number, Margalef index, Pielou index, Shannon–Wiener index, and Simpson index; and β-diversities (Whittaker index, Cody index). Basal area of stands exhibited a decreasing trend along the disturbance level due to a gradual increase in the extraction of timber by the human disturbances. The indices of species diversity suggested that overstory and understory species were distributed evenly among the groups or disturbance levels. There were no absolutely dominant tree species in the secondary forest ecosystems. The differences in site factors and the current disturbance intensities were not intense enough to lead to loose changes in overstory and understory species. The species diversity indices exhibited the maximum values at D3 (G5) for herbaceous layer species; this may suggest that the current disturbance intensities were intense enough to lead the changes of herbaceous layer species. Three rare and endangered species (Juglans mandshurica, Fraxinus mandshurica and Acanthopanax senticosus) were found within the secondary forests. These rare and endangered species appeared in each clustered group or disturbance level, which suggested that the current disturbance intensity in the study area was not strong enough to influence the distribution of rare and endangered species. The current disturbances in the secondary forests may not lead to a decrease in stability and complexity of the overstory and understory species, but the higher disturbance level may be intense enough to change the habitat fitness for the herbaceous species. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized authors.     

Dynamics of Zn between soil and plant in Northeast Leymus chinensis grassland

A study was conducted to determine the dynamic of Zn content between soil and plant in the natural protection zone of Leymus chinensis grassland in Changling County (44°30′–44°45′N; 123°31′–124°10′E), Jilin Province, China. Results showed that the total Zn content was lower, available Zn content had a moderate level in the soil, and the plants was not lack of Zn. During the growing season, content of total Zn and available Zn in soil showed a down-trend distribution along the soil profile. Content of total Zn had a significantly positive correlation with that of the organic matter, but it was negatively correlated to soil pH. Monthly dynamic of the average content of total Zn showed a “V” type curve in the growing season from May to August, and July was the nadir. The trend of the average content of available Zn was similar to the content of total Zn, but was down after August; Zn content variation in the organs and litter of L. chinensis was great, with the order of root>rhizome >leaf>stem>litter. The ratio of available Zn content in A layer versus B layer was more than 2 times that of the total Zn, which indicated that the soil of A layer had higher enrichment capacity of available Zn. The enrichment of Zn in the root of L. chinensis was 44.17 times as that in the soil. The absorbing intensity of root had a significantly negative correlation with the activity of Zn in the soil (r=−0.8800, p<0.01). Biography: ZHOU Xiao-mei (1966–), female, Ph.D., associate professor of Jilin Normal University, Siping 136000, P.R. China.     

Effect of temperature and compression on the mechanical behavior of steam-treated wood

The mechanical behavior of steamed spruce wood changes dramatically with compression along the grain, the change being much more moderate perpendicular to the grain. The stiffness decrement due to increased temperature is greatest in the tangential material direction. The stiffness decrement due to compression is greatest along the grain. Compression to 80% compressive strain at 131°C inverts the order of the material directions regarding stiffness, the stiffness being the least along the grain. Plastic strain due to compression is greater at higher temperatures. The compression-induced decrement of stiffness along the grain is greater at higher temperatures, but the off-axis decrement of stiffness is less at higher temperatures.