Effects of roasting on pyrazine contents and oxidative stability of red pepper seed oil prior to its extraction

Red pepper seeds were roasted with constant stirring for 6, 9, 10, and 12 min at 210 degrees C, and oils were extracted from the roasted red pepper seeds using an expeller. The iodine values and fatty acid compositions of red pepper seed oils did not change with roasting time. The fatty acid composition of the oil obtained from the red pepper seeds roasted for 6 min was 0.24% myristic acid, 13. 42% palmitic acid, 0.33% palmitoleic acid, 2.07% stearic acid, 10. 18% oleic acid, 73.89% linoleic acid, and 0.37% linolenic acid, showing a fatty acid composition similar to that of high-linoleate safflower oil. Thirteen alkylpyrazines were identified in the roasted red pepper seed oils: 2-methylpyrazine, 2,5-dimethylpyrazine, 2,6-dimethylpyrazine, 2-ethylpyrazine, 2-ethyl-6-methylpyrazine, 2-ethyl-5-methylpyrazine, trimethylpyrazine, 2,6-diethylpyrazine, 2-ethyl-3,5-dimethylpyrazine, tetramethylpyrazine, 2, 3-diethyl-5-methylpyrazine, 2-isobutyl-3-methylpyrazine, and 3, 5-diethyl 2-methylpyrazine. The pyrazine content increased markedly as the roasting time increased, showing 2.63, 5.01, 8.48, and 13.10 mg of total pyrazine/100 g of oils from the red pepper seeds roasted for 6, 8, 10, and 12 min, respectively, at 210 degrees C. 2, 5-Dimethylpyrazine in the roasted red pepper seed oil seemed to be the component most responsible for the pleasant nutty aroma of the oils. The oxidative stabilities of oils increased greatly as the roasting time increased.     

Synthesis and thermal properties of polyhydroxyamide copolymer and its derivatives

We synthesized a polyhydroxyamide (PHA) copolymer via low-temperature solution polymerization of 3,3'-dihydroxybenzidine with terephthaloyl chloride (80.0 mol%) and isophthaloyl chloride (20.0 mol%) in N,Ndimethylacetamide with the aid of LiCl. We prepared the PHA copolymer derivatives containing the fluorine-based substituents and investigated their solubility, cyclization behavior, and thermal properties using a differential scanning calorimeter (DSC), a thermogravimetric analyzer (TGA), and the simultaneous thermogravimetric analyzer coupled with a mass spectrometer (STA-MS). The chemical structures of the PHA copolymer and its derivatives, as well as the polybenzoxazoles (PBOs) obtained through thermal cyclization of the copolymer and derivatives, were determined by a fourier transform infrared (FT-IR) spectroscopic analysis. The PHA copolymer could be dissolved in organic solvents only with the aid of LiCl, while its derivatives were readily soluble in DMA_c and NMP without LiCl at room temperature. The DSC and TGA results demonstrated that the PHA copolymer derivatives could be converted to PBOs at a lower temperature than the PHA copolymer.     

Thermal properties of copolyetherester/silica nanocomposites

Thermal properties of copolyetherester/silica nanocomposites were examined by using DSC and TGA. The segmented block copolyetheresters with various hard segment structures and hard segment contents (HSC) were synthesized and their silica nanocomposite films were prepared by solution casting method. The nano-sized fumed silica particles were found to act as a nucleating agent of the copolyetheresters. The nanocomposites always showed reduced degree of supercooling or faster crystallization than the corresponding copolyetheresters. The nanocomposites also showed increased hard segment crystallinity except HSC 35 sample which had short hard segment length. In case of 2GT [poly(ethylene terephthalate)] copolyetheresters, which were not developed commercially because of their low crystallization rate, the hard segment crystallinity increased considerably. The copolyetherester/silica nanocomposites showed better thermal stability than copolyetheresters.     

Formation,characterization, and glucose response in mice to rice starch with low digestibility produced by citric acid treatment

The optimum conditions for producing rice starch enriched in slowly digestible and resistant fractions by citric acid treatment determined by a response surface methodology (RSM) model equation, were: reaction temperature, 128.4 °C; reaction time, 13.8 h; and citric acid, 2.62 mmol/20 g starch. The slowly digestible and resistant starch fractions of the optimally acid-treated rice starch totalled 54.1%, which was 28.1% higher than the control. The slowly digestible and resistant fractions of the acid-treated rice starch did not differ significantly after heat treatment, whereas those of raw rice starch decreased by 49.6–63.8%, depending on the type of heat treatment (cooking at 100 °C or autoclaving). The slowly digestible fraction of the acid-treated starch increased by 8.9–14.2%. After autoclaving, the glucose response of the acid-treated starch was lower than untreated starch, but similar to that of Novelose 330. After heat treatment, the rate of blood glucose decrease was slower for the acid-treated starch than for Novelose 330. Compared to raw rice starch, the acid-treated starch exhibited increases in apparent amylose content, blue value, dextrose equivalent, cold-water solubility and transmittance, and decreases in wavelength of maximum absorbance, viscosity, and gel-forming ability.     

Effects of Added Minerals on Pasting of Partial Waxy Wheat Flour and Starch and on Noodle Making Properties

Mineral content, as determined and expressed by ash content, serves as an index of wheat flour quality for flour millers and food manufacturers who prefer flour of low mineral content, even though the significance of mineral content on the functional properties of wheat flour is not well understood. We explored whether minerals have any influence on the functional properties of wheat flour and product quality of white salted noodles. Ash, obtained by incinerating wheat bran, was incorporated into two hard white spring wheat flours and their starches to raise the total ash content to 1, 1.5, or 2%. Pasting properties were determined using a rapid visco analyzer (RVA). Addition of ash increased the peak viscosity of the flours in both water and buffer solution but did not affect the peak viscosity of starch. Wheat flours with added ash showed lower pasting temperature by approximately 10°C in buffer solution. Mineral extracts (15.3% ash) isolated from wheat bran, when added to increase the ash content of wheat flour and starch to 2%, increased the peak viscosity and lowered the pasting temperature of flour by 13.2–16.3% but did not affect the pasting properties of the isolated starch. The mineral premix also increased peak viscosity of wheat flour but not in starch. Added ash increased noodle thickness and lowered water retention of cooked noodles while it exhibited no significant effect on cooked noodle texture as determined using a texture analyzer.     

Retrogradation of waxy and normal corn starch gels by temperature cycling

Gelatinized waxy and normal corn starches at various concentrations (20–50%) in water were stored under temperature cycles of 4°C and 30°C (each for 1 day) up to 7 cycles or at a constant temperature of 4°C for 14 days to investigate the effects of temperature cycling on the retrogradation of both starches. Compared to starches stored only at 4°C, both starches stored under the 4/30°C temperature cycles exhibited smaller melting enthalpy for retrogradation (ΔH_r), higher onset temperature (T_o), and lower melting temperature range (T_r) regardless of the starch concentration tested. Fewer crystallites might be formed under the temperature cycles compared to the isothermal storage, but the crystallites formed under temperature cycling appeared more homogeneous than those under the isothermal storage. The effect of starch content on the retrogradation was greater when the starch gels were stored under cycled temperatures. The reduction in ΔH_r and the increase in conclusion temperature (T_c) by retrogradation under 4/30°C temperature cycles became more apparent when the starch concentration was lower (20 or 30%). Degree of retrogradation based on melting enthalpy was greater in normal corn starch than in waxy corn starch when starch content was low.     

Barley for food: Characteristics,improvement, and renewed interest

Barley (Hordeum vulgare vulgare L.) is an ancient cereal grain, which upon domestication has evolved from largely a food grain to a feed and malting grain. However, barley food use today remains important in some cultures around the world, particularly in Asia and northern Africa, and there is renewed interest throughout the world in barley food because of its nutritional value. This review covers basic and general information on barley food use and barley grain processing for food use, as well as an in-depth look at several major aspects/traits of interest for barley food use including kernel hardness and colour, grain starch, and β-glucan contents. These traits are described in terms of their effects on processing and nutrition, as well as their inheritance and the prospects for barley improvement through breeding. Whereas, the aspects listed above have been studied relatively extensively in barley in terms of content, form, genetics, physiology, and in some cases nutritional quality, little is know about functional properties for processing and food product development. Renewed interest in barley for food uses largely centres around the effects of β-glucans on lowering blood cholesterol levels and glycemic index. Wholegrain barley foods also appear to be associated with increased satiety and weight loss. There is great potential to utilise barley in a large number of cereal-based food products as a substitute partially or wholly for currently used cereal grains such as wheat (Triticum aestivum), oat (Avena sativa), rice (Oryza sativa), and maize (Zea mays).     

Effects of Glycerol and Moisture Redistribution on Mechanical Properties of White Bread

Effects of glycerol and moisture redistribution on mechanical properties of bread were investigated. Firmness increased in all bread crumb over storage time but firming rate was dependent on the initial moisture content, storage method (stored with and without crust), and the presence of glycerol. Faster firming was observed when bread crumb had low initial moisture content and high glycerol level, and was stored with crust. The effect of glycerol was more pronounced when stored with crust, suggesting a critical role of water loss. Firmness showed a good correlation (r² = 0.95) with the scale factor (C₁) from a mathematical model. Recoverable work rapidly decreased in first three days of storage and then remained relatively unchanged thereafter. Hardening of aged bread (but not fresh bread) by glycerol may be explained by local dehydration of bread polymer due to osmotic dehydration or competition for water, which in turn promote more rapid amorphous network formation but less amylopectin recrystallization.     

Influence of Amylose Content on Properties of Wheat Starch and Breadmaking Quality of Starch and Gluten Blends

The effects of amylose content on thermal properties of starches, dough rheology, and bread staling were investigated using starch of waxy and regular wheat genotypes. As the amylose content of starch blends decreased from 24 to 0%, the gelatinization enthalpy increased from 10.5 to 15.3 J/g and retrogradation enthalpy after 96 hr of storage at 4°C decreased from 2.2 to 0 J/g. Mixograph water absorption of starch and gluten blends increased as the amylose content decreased. Generally, lower rheofermentometer dough height, higher gas production, and a lower gas retention coefficient were observed in starch and gluten blends with 12 or 18% amylose content compared with the regular starch and gluten blend. Bread baked from starch and gluten blends exhibited a more porous crumb structure with increased loaf volume as amylose content in the starch decreased. Bread from starch and gluten blends with amylose content of 19.2–21.6% exhibited similar crumb structure to that of bread with regular wheat starch which contained 24% amylose. Crumb moisture content was similar at 5 hr after baking but higher in bread with waxy starch than in bread without waxy starch after seven days of storage at 4°C. Bread with 10% waxy wheat starch exhibited lower crumb hardness values compared with bread without waxy wheat starch. Higher retrogradation enthalpy values were observed in breads containing waxy wheat starch (4.56 J/g at 18% amylose and 5.43 J/g at 12% amylose) compared with breads containing regular wheat starch (3.82 J/g at 24% amylose).