Identification of a novel glycoside, leptosin, as a chemical marker of manuka honey

As a preliminary study, we have found that honey from manuka (Leptospermum scoparium) in New Zealand inhibits myeloperoxidase (MPO) activity. In this study, using a chromatographic technique, we isolated two active compounds for MPO-inhibition from manuka honey. One is methyl syringate (MSYR), and the other was identified as a novel glycoside of MSYR, methyl syringate 4-O-β-D-gentiobiose, which has been named "leptosin" after the genus Leptospermum . The amount of the glycoside ranged from 0.2 to 1.2 μmol/g honey. Leptosin was only found in honeys from the Oceania region, and abundantly in manuka honey including jelly bush honey from Leptospermum polygalifolium in Australia. Therefore, leptosin may be a good chemical marker for manuka honey. Interestingly, the concentration of leptosin in manuka honey was positively correlated with the unique manuka factor (UMF) value, which is expressed as phenol equivalents of its bactericidal activity.     

Basal body temperature method for detecting ovarian cycle in the Captive Beluga (Delphinapterus leucas)

The relationship between basal body temperature and circulating progesterone levels were investigated in a female beluga. Body temperature and serum concentrations of progesterone were measured daily and at 2-4 week intervals respectively, in a female beluga that was in captivity for 7 years between 1996 and 2003. The beluga first ovulated in April, 2000 (13 years old). Thereafter, serum concentrations of progesterone showed cyclic changes, indicating that the ovulatory cycle had started. Serum concentrations of progesterone ranged from 0.1 ng/ml to 15.7 ng/ml. Body temperature also showed cyclic changes during the estrous cycle. Body temperature ranged from 34.9 to 35.9 C, and tended to reach the peak during the high progesterone phase. Mating behavior was observed during the low body temperature phase. The changes in body temperature positively correlated with the circulating progesterone levels. The length of the estrous cycle was 36.7 +/- 3.9 (mean +/- SEM) days based on the intervals between the days of mating behavior. This is the first report demonstrating that body temperature clearly changes during the estrous cycle in a captive female beluga. The present finding suggests that measurement of body temperature is a useful method for detecting the ovarian cycle of the beluga in captivity.     

Highly polymerized procyanidins in brown soybean seed coat with a high radical-scavenging activity.

1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging activity of the 70% aqueous acetone extract from the seed coat of the brown soybean variety, Akita-Zairai, was investigated. The activity of the seed coat of Akita-Zairai was much higher than that of three other reddish-brown varieties, but lower than that of two black varieties, and was closely dependent on the content of phenolic compounds. In the LH20 column chromatography of Akita-Zairai, high DPPH radical-scavenging activities were detected in the fractions eluted with MeOH and 70% aqueous acetone. Proanthocyanidins were also detected in fractions showing high radical-scavenging activities. Matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry analysis showed that the degree of polymerization (DP) of the procyanidins contained in the brown or black soybean seed coat was as high as DP30.     

Analysis of 2-alkylcyclobutanones with accelerated solvent extraction to detect irradiated meat and fish

A new analytical procedure has been developed to analyze 2-alkylcyclobutanones to detect gamma-ray-irradiated fat-containing foodstuffs. Samples were extracted with an accelerated solvent extraction system via hot and pressurized ethyl acetate in cells. A large amount of fat in the extract was precipitated and removed with filtration by standing at -20 degrees C after the addition of acetonitrile. The extract was further cleaned with a 1 g silica gel mini column, and the radiolytic compounds of 2-docecylcyclobutanone (2-DCB) and 2-tetradecylcyclobutanone (2-TCB) were determined with gas chromatography with mass spectrometry (GC/MS). Sample preparation time before GC/MS was 7-8 h. At first, the procedure was evaluated with a recovery test in eight samples spiked with 2-DCB and 2-TCB at 20 ng/g, resulting in 70-105% recoveries with mostly less than 10% relative standard deviations. The procedure was further evaluated with beef, pork, chicken, and salmon samples irradiated with gamma-rays from 0.7 to 7.0 kGy at -19 degrees C. Both 2-DCB and 2-TCB in most samples were detected with good dose-response relations at all doses, while salmon was detected more than 2 kGy irradiation. The amounts of 2-alkylcyclobutanones produced reflected precursor fatty acids levels in samples, especially for the combination of 2-TCB and stearic acid. The results indicated that the production rate of 2-TCB to stearic acid was more obvious than that of 2-DCB to palmitic acid in frozen samples with gamma-ray irradiation.     

Study of the role of the carbohydrate and protein moieties of soy soluble polysaccharides in their emulsifying properties

The objective of this work was to investigate the role played by the protein fraction of soy soluble polysaccharide (SSPS) during its adsorption at oil/water interfaces. SSPS was separated in a high (HMF; 310 kDa) and low (LMF; 20 kDa) molecular weight fraction by gel filtration. SSPS/HMF consisted of 91.6% carbohydrate and 2.2% protein and showed better emulsifying properties than those of the whole SSPS, whereas SSPS/LMF seemed to affect negatively the adsorption behavior of SSPS. SDS-PAGE of the protein fraction obtained from SSPS/HMF showed a molecular mass of 50 kDa, was composed predominantly of proline (23.1%) and glutamic acid (15.2%), and still contained 8.8% of neutral sugar and 5.3% of uronic acid. Results indicated that not all of the protein material present in SSPS contributes to SSPS functionality but that only the material associated with HMF aids in the adsorption of SSPS onto oil/water interfaces.     

Enthalpy relaxation behavior of dry wood detected by temperature-modulated differential scanning calorimetry

Enthalpy relaxation of dry wood has been investigated by temperature-modulated differential scanning calorimetry. The reversing and non-reversing heat flow changes revealed that enthalpy relaxation occurred in dry wood, which did not exhibit any clear glass transitions. This enthalpy relaxation behavior seemed to differ significantly from those of previously reported isolated lignins, which implies that the microstructure of dry wood possesses a rigid amorphous state derived from interactions among wood components. The observed enthalpy relaxation is considered to be related to other components besides lignin, and the time-dependent physical properties due to unstable states or physical aging of wood originate not only from lignin but also from other components, such as cellulose and hemicellulose and the interactions between them.     

Multifunctional Alloys Obtained via a Dislocation-Free Plastic Deformation Mechanism

We describe a group of alloys that exhibit "super" properties, such as ultralow elastic modulus, ultrahigh strength, super elasticity, and super plasticity, at room temperature and that show Elinvar and Invar behavior. These "super" properties are attributable to a dislocation-free plastic deformation mechanism. In cold-worked alloys, this mechanism forms elastic strain fields of hierarchical structure that range in size from the nanometer scale to several tens of micrometers. The resultant elastic strain energy leads to a number of enhanced material properties.     

Corky root of lettuce caused by Rhizorhapis suberifaciens in Japan

Journal of General Plant Pathology - In 2017 and 2018, corky root disease was observed on lettuce (Lactuca sativa L.) in Nagano Prefecture, Japan. The symptoms included corky, brittle, dark-brown...     

Wood friction characteristics during exposure to high pressure: influence of wood/metal tool surface finishing conditions

Friction that arises during processing for the deformation of wood under relatively high pressure levels (ca. >1 MPa) is an important factor to be taken into account when wood is processed. However, few studies on such friction have been published. The present study was undertaken to evaluate the influence of surface finishing conditions on the nominal friction coefficient (μ) of the wood and metal tool surfaces. Sticking friction was likely to arise on a relatively coarse metal surface, and the type of metal tool surface finishing was found to have large impact on the friction mechanism. The friction characteristics during exposure to high pressure seem to be affected not only by the interface contact characteristics, but also by the deformation characteristics of wood during compressive load or measurement. The value of μ on water-saturated wood was equal or higher than that on dry wood, which suggests that the contact characteristics between these two types of wood are significantly different. The water content in wood was shown to affect both the interface contact and deformation characteristics of wood. The value of μ was not significantly affected by the wood surface finishing conditions; however, changes in μ during sliding differed slightly, depending on the finishing conditions.