Reproductive season and female maturity size of coconut crab <Emphasis Type="Italic">Birgus latro</Emphasis> on Hatoma Island,southern Japan

Information about reproductive season, size at sexual maturity and size-dependent reproductive potentials is important for efficient resource management. Such information is necessary to determine seasonal closures and minimum legal size limits. To conserve resources of coconut crab Birgus latro, which are in danger of extinction due to excessive exploitation, their reproductive season, female size at functional maturity and relationship between female size and reproductive potentials were investigated. The reproductive season started in early June and ended late August, and females with higher reproductive potentials showed a tendency to spawn early in the reproductive season. The prohibition of exploiting the resources during the reproductive season, especially early in the season, would be appropriate for sustainability of high reproductive outputs. Fifty percent of investigated females matured functionally at 24.5-mm thoracic length (TL). However, the size at which all females reached functional maturity was 32.3 mm TL, and there was a wide variation in the size of functional maturity among individuals. We must determine minimum legal size by taking the variation into account to allow all individuals to mate at least once before they are caught, which may prevent serious depression in reproductive rate and genetic diversity.     

Efficacy of Mineral Oil-Insecticide Mixtures for Protection of Potato Tubers Against PVY and PVM

The impact of a dozen mixtures of the most commonly applied aphicides: Mospilan 20 SP (acetamiprid), Pirimor 500 (pirimicarb) and Karate Zeon 050 CS (lambda-cyhalothrin), combined with the mineral oil Sunspray 850 EC, was researched in field conditions to assess their effectiveness in limiting potato tuber PVY, PVM and PLRV infection. In spite of the greatest reduction in the number of aphids occurring following application of Mospilan 20 SP, this treatment was not as effective in limiting PVY infection as, for example, applying Sunspray 850 EC mineral oil. Mineral oil, when used on its own or in a mixture with Pirimor 500 WG, was found to be the most effective measure for limiting PVY infection (the incidence of tubers infested with PVY was reduced by 64 % relative to control, i.e. no protection). A slightly weaker effect was observed in the case of a combination of the mineral oil with full doses of Karate Zeon 050 CS with a half of a dose of Mospilan 20 SP insecticide, however only for protection against PVY. A similar trend was observed for PVM even though a significant difference was only observed for Sunspray 850EC?+?Pirimor 500WG. In conclusion, the application of insecticide mixtures with mineral oil in protecting against PVY infection is not always as effective as the application of the oil itself only. Addition of the insecticide may sometimes improve the efficacy of protection, however, due to the extra costs involved, not always does it have to be economical.     

Attributes of People’s Organisations and the institutional viability of selected Community-Based Forest Management projects in northern Luzon

An assessment was made of the attributes of People’s Organisations (POs) and of the institutional viability of Community-Based Forest Management (CBFM) programs in three project sites in the Philippines. In CBFM, the capacity of People’s Organisations, as de facto managers of forest resources, is being developed by non-government organisations under the guidance of local government units (LGUs) and the Department of Environment and Natural Resources (DENR). A survey was conducted of community members (case informants) and members of the various agencies (key informants) to ascertain the characteristics of successful POs and the relationship between these characteristics and the viability of CBFM. Although commendable contributions have been made to the forest management capability of POs, their standard of living and environmental conditions, there are also many instances in which institutional conflict among stakeholders is apparent. The great challenge for the various stakeholders is to orchestrate their differing interests so as to address successfully the critical issues of the low socioeconomic status of PO members, corruption, lack of transparency and accountability of the organisations involved, loss of interest of PO members in project activities, lack of technical assistance, loss of credibility of the DENR, and lack of equitable benefit sharing.     

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).     

Large-scale deployment of a rice 6 K SNP array for genetics and breeding applications

Background

Fixed arrays of single nucleotide polymorphism (SNP) markers have advantages over reduced representation sequencing in their ease of data analysis, consistently higher call rates, and rapid turnaround times. A 6 K SNP array represents a cost-benefit “sweet spot” for routine genetics and breeding applications in rice. Selection of informative SNPs across species and subpopulations during chip design is essential to obtain useful polymorphism rates for target germplasm groups. This paper summarizes results from large-scale deployment of an Illumina 6 K SNP array for rice.

Results

Design of the Illumina Infinium 6 K SNP chip for rice, referred to as the Cornell_6K_Array_Infinium_Rice (C6AIR), includes 4429 SNPs from re-sequencing data and 1571 SNP markers from previous BeadXpress 384-SNP sets, selected based on polymorphism rate and allele frequency within and between target germplasm groups. Of the 6000 attempted bead types, 5274 passed Illumina’s production quality control. The C6AIR was widely deployed at the International Rice Research Institute (IRRI) for genetic diversity analysis, QTL mapping, and tracking introgressions and was intensively used at Cornell University for QTL analysis and developing libraries of interspecific chromosome segment substitution lines (CSSLs) between O. sativa and diverse accessions of O. rufipogon or O. meridionalis. Collectively, the array was used to genotype over 40,000 rice samples. A set of 4606 SNP markers was used to provide high quality data for O. sativa germplasm, while a slightly expanded set of 4940 SNPs was used for O. sativa X O. rufipogon populations. Biparental polymorphism rates were generally between 1900 and 2500 well-distributed SNP markers for indica x japonica or interspecific populations and between 1300 and 1500 markers for crosses within indica, while polymorphism rates were lower for pairwise crosses within U.S. tropical japonica germplasm. Recently, a second-generation array containing ~7000 SNP markers, referred to as the C7AIR, was designed by removing poor-performing SNPs from the C6AIR and adding markers selected to increase the utility of the array for elite tropical japonica material.

Conclusions

The C6AIR has been successfully used to generate rapid and high-quality genotype data for diverse genetics and breeding applications in rice, and provides the basis for an optimized design in the C7AIR.

     

A new gene <Emphasis Type="Italic">Bph33</Emphasis>(<Emphasis Type="Italic">t</Emphasis>) conferring resistance to brown planthopper (BPH), <Emphasis Type="Italic">Nilaparvata lugens</Emphasis> (Stål) in rice line RP2068-18-3-5

The rice brown planthopper (BPH) Nilaparvata lugens (Stål) is one of the major pests of rice across Asia. Host-plant resistance is the most ecologically acceptable means to manage this pest. A rice breeding line RP2068-18-3-5 (RP2068) derived from the land race Velluthacheera is reported to be resistant to BPH populations across India. We identified a new R gene [Bph33(t)] in this line using advanced generation RILs derived from TN1 × RP2068 cross through phenotyping at two locations and linkage analysis with 99 polymorphic SSR markers. QTL analysis through IciMapping identified at least two major QTL on chromosome 1 influencing seedling damage score in seed box screening, honey dew excretion by adults and nymphal survival. Since no BPH R gene has been reported on chromosome 1, we designate this locus as a new gene Bph33(t) which accounted for over 20% of phenotypic variance. Scanning the region for candidate gene suggested two likely candidates a leucine rich repeat (LRR) gene and a heat shock protein (HSP) coding gene. Expression profiling of the two genes in the two contrasting parents and RILs showed induction of the HSP gene (LOC_Os01g42190.1) at 6 h after infestation while LRR gene did not show such induction. It is likely that the HSP represented Bph33(t).     

Molecular cloning and characterization of an inhibitor of apoptosis protein in the mud crab <Emphasis Type="Italic">Scylla paramamosain</Emphasis>: its potential anti-apoptosis role under air exposure stress

The mud crab Scylla paramamosain is a widely farmed commercial species in southeast coastal areas of China. The crabs are placed in water-free containers for transportation to inland markets, thus are exposed to dry conditions for more than 72 h after capture and may suffer from air exposure stress, triggering cell apoptosis leading to death. To evaluate whether an inhibitor of apoptosis protein (IAP) is involved in apoptosis resistance against air exposure stress in crustaceans, SpIAP was cloned and investigated for the first time. The full length of SpIAP was 3351 bp, encoding a polypeptide of 662 amino acids. The predicted SpIAP protein contained three baculoviral IAP repeat domains and one really interesting new gene (RING) finger domain. Protein basic local alignment search tool and phylogenetic analysis results showed that SpIAP was clustered together with other crustaceans IAPs. SpIAP was detected in all the examined tissues and predominantly expressed in the hepatopancreas. When crabs were challenged with air exposure for 12 h, the expression level of SpIAP in the hepatopancreas was significantly increased in the experimental group compared with the control group. A RNA interference assay and flow cytometry analysis showed that when SpIAP was silenced, the cell apoptotic rate significantly increased after 24 h air exposure. These results suggested that SpIAP was involved in an anti-apoptosis response induced by air exposure in S. paramamosain.     

Genetic characterization of <Emphasis Type="Italic">Pepino mosaic virus</Emphasis> isolates from Belgian greenhouse tomatoes reveals genetic recombination

Over a period of a few years, Pepino mosaic virus (PepMV) has become one of the most important viral diseases in tomato production worldwide. Infection by PepMV can cause a broad range of symptoms on tomato plants, often leading to significant financial losses. At present, five PepMV genotypes (EU, LP, CH2, US1 and US2) have been described, three of which (EU, LP and US2) have been reported in Europe. Thus far, no correlation has been found between different PepMV genotypes and the symptoms expressed in infected plants. In this paper, the genetic diversity of the PepMV population in Belgian greenhouses is studied and related to symptom development in tomato crops. A novel assay based on restriction fragment length polymorphism (RFLP) was developed to discriminate between the different PepMV genotypes. Both RFLP and sequence analysis revealed the occurrence of two genotypes, the EU genotype and the CH2 genotype, within tomato production in Belgium. Whereas no differences were observed in symptom expression between plants infected by one of the two genotypes, co-infection with both genotypes resulted in more severe PepMV symptoms. Furthermore, our study revealed that PepMV recombinants frequently occur in mixed infections under natural conditions. This may possibly result in the generation of viral variants with increased aggressiveness.     

Aloe ring spot,a new disease of aloe caused by <Emphasis Type="Italic">Haematonectria haematococca</Emphasis> (Berk. &; Broome) Samuels &; Nirenberg (anamorph: <Emphasis Type="Italic">Fusarium</Emphasis> sp.)

A ring spot disease of Aloe vera was found on leaves of potted seedlings of Aloe vera in Hachijojima and Chichijima Islands, Tokyo. From tissue of ring spot lesions, a fungus producing Fusarium-type conidia was consistently isolated. After 1 month, reddish perithecia of nectriaceous fungus had formed on the colonies of this isolate on PDA. These nectriaceous and Fusarium fungi were identified as Haematonectria haematococca and Fusarium sp., respectively. From a single ascospore isolation, the former was confirmed to be the teleomorph of the Fusarium sp. Typical ring spot lesions were reproduced by artificial inoculations using single ascospore and single conidium isolates. Inoculations of five species of genus Aloe revealed that they were highly susceptible except for A. arborescens. This is the first report of a disease on Aloe caused by H. haematococca (anamorph: Fusarium sp.) in Japan, and it was named aloe ring spot.