Investigation of elastic constants and ultimate strengths of Korean pine from compression and tension tests

Korean pine (Pinus koraiensis) is a wood species recently adopted in China for the rehabilitation of traditional timber buildings. This paper investigates its mechanical properties with laboratory tests on typical specimens to obtain the moduli of elasticity, Poisson’s ratios, shear moduli, coefficients of mutual influence, crushing strengths and tension strengths in various directions. Highly different failure patterns of specimens in compression test were observed when loaded in different directions relative to the grain while only brittle failure mode was observed for tension specimens. The measured parameters of Korean pine were compared with those obtained from theory of orthotropic elasticity, the empirical formula and the Norris failure criterion, good agreements were reached for all examinations in general which indicate it is admissible to treat Korean pine as ideal orthotropic material.     

Relationship between <Superscript>137</Superscript>Cs concentration and potassium content in stem wood of Japanese cedar (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>)

To utilize forest resources in areas affected by fallout from the Fukushima Daiichi Nuclear Power Plant accident, it is important to understand the mechanisms of ¹³⁷Cs movement through the stem wood of contaminated trees. Understanding the mechanism of absorption and migration of ¹³⁷Cs to stem wood is necessary for clues to the future prediction of the transition of ¹³⁷Cs to xylem. In the present study, radial variations in ¹³⁷Cs concentration were investigated in Japanese cedar (Cryptomeria japonica D. Don) trees collected 1 year and 10 months after the accident. Additionally, the relationship between ¹³⁷Cs concentration and potassium (K) content was established. Trees with a higher moisture content and lower lightness value in heartwood tended to have a higher ¹³⁷Cs concentration in the heartwood. In these trees, ¹³⁷Cs concentration peaked at the heartwood–sapwood boundary and gradually decreased toward the pith. By contrast, K content within the heartwood remained nearly constant along the radial direction. The heartwood-to-sapwood ratio of ¹³⁷Cs concentration was significantly positively correlated with that of K content. Based on these results, we suggest that ¹³⁷Cs movement from sapwood to heartwood might be related to the K content ratio of heartwood and sapwood.     

Effects of tightening speed on torque coefficient in lag screw timber joints with steel side plates

To investigate the effects of tightening speed on the torque coefficient in lag screw timber joints with steel side plates, tightening tests were conducted on main timber members made from Cryptomeria japonica, Chamaecyparis obtusa and Pseudotsuga menziesii, under four tightening speed conditions (1, 4, 10, and 20 rpm). Major stick-slip behavior was observed in C. obtusa based on the relationship of tightening angle with clamp force, tightening torque, and thread torque at tightening speeds of 1 and 4 rpm. In addition, tightening speed’s effects on the torque coefficient (K) varied depending on the wood species of the main member. In P. menziesii, K was not affected by the tightening speed: the ratio of torque expended on tightening was 25% on average, and the ratio of torque expended on bearing surface friction was higher than the ratio of torque expended on thread friction.     

Temperature dependences of the dynamic viscoelastic properties of wood and acetylated wood swollen by water or organic liquids

In this study, to summarize the changes of thermal-softening behaviors of wood and acetylated wood due to differences in the kinds of swelling liquids, the following measurements were conducted. Untreated and acetylated wood samples were swollen by various liquids and the temperature dependences of the dynamic viscoelastic properties were measured after the heating and cooling histories were unified among the samples. The results obtained are as follows. Untreated samples swollen by high-polarity liquid had lower peak temperature of tanδ, however acetylated samples had higher peak temperature of tanδ than those of untreated wood. On the other hand, untreated wood samples swollen by low-polarity liquid had higher peak temperature of tanδ, however acetylated samples had lower peak temperature of tanδ than those of untreated wood. The amount of swelling is determined by interaction between wood and liquid due to proton-accepting power and molar volumes of liquid and so on, therefore the peak temperature of tanδ and degree of reduction in dynamic elastic modulus (E´) with increasing temperature were corresponded to the amount of swelling.     

Influence of pretreated wood dowel with CuCl<Subscript>2</Subscript> on temperature distribution of wood dowel rotation welding

This study examined the temperature distribution during rotation welding process using birch (Betula spp.) wood dowel and Chinese larch (Larix gmelinii) substrates. Wood dowels were divided into two categories including an untreated group and a group pretreated with cupric chloride. The mechanics test results indicated that the pullout resistance of the pretreated group with welded time 3 s showed the best performance. As a fitting analyses result, both the untreated group and pretreated group showed a significant nonlinear relationship among temperature, welded depth and welded time. In the untreated group case, a linear regression relationship was found between the highest temperature of the welding interface and the depth. However, two-stage fitting was used to fit the regression for the pretreated group. Compared with the untreated group, thermogravimetric (TG) analysis of the pretreated group welding interface presented two pyrolytic peaks, and it illustrated that the pretreatment promoted the depolymerization and pyrolysis of wood constituents.     

Experimental study on the fire performance of straight-line dovetail joints

To study the fire performance of the common dovetail joint in Chinese ancient architecture, we performed fire exposure and fire resistance tests of straight-line dovetail joints. The fire exposure test shows that the contact part of the dovetail joint was hardly charred because the gap between them is small. In the reference test, the displacement linearly varies with the load when the dovetail joint is fully pressed together. In the fire test, fire retardant coating can improve the fire resistance of the specimen, and its fire protection effect is remarkable. With the increase in load, the fire resistance of specimens obviously decreases. The effect of a tiny 2–4 mm gap between the tenon and the mortise on heat transfer is notably limited. The load level does not significantly affect the speed of temperature increase.     

Within-stem variations in mechanical properties of <Emphasis Type="Italic">Melia azedarach</Emphasis> planted in northern Vietnam

Within-stem variations in the mechanical properties of 17–19-year-old Melia azedarach planted in two sites in northern Vietnam were examined by destructive and nondestructive methods. Wood samples were collected from 10, 50, and 90% of the radial length from pith on both sides (North and South) at 0.3, 1.3, 3.3, 5.3, and 7.3 m heights above the ground. The mean values in whole trees of wood density (WD), modulus of rupture (MOR), modulus of elasticity (MOE), and dynamic modulus of elasticity (E_d) at 12% moisture content were 0.51 g/cm³, 78.58 MPa, 9.26 GPa, and 10.93 GPa, respectively. Within the stem, the radial position was a highly (p?<?0.001) significant source of variation in mechanical properties. MOR, MOE, and E_d increased from pith to bark. WD had a strong positive linear relationship with both MOR (r?=?0.85, p?<?0.001) and MOE (r?=?0.73, p?<?0.001). This suggests that it is potentially possible to improve mechanical properties through controlling WD. MOR had also a strong linear relationship with E_d (r?=?0.84, p?<?0.001). This indicates that E_d is a good indicator to predicting the strength of wood if the density of measured element is known. Besides, the stress wave method used in this study provides relatively accurate information for determining the stiffness of Melia azedarach planted in northern Vietnam.     

Pore structure and the properties of electric double layer capacitor electrode of bamboo-derived activated carbon prepared by superheated steam

Bamboo-derived activated carbon prepared by superheated steam (BAC) exhibited performance for utilization as an electric double layer capacitor (EDLC) electrode. Pore structure and EDLC performances were investigated by comparison with phenol resin-derived activated carbon (MSP-20), which is commercially available and often used for the purpose. The nitrogen adsorption isotherm showed that BAC had a large BET-specific surface area of 1268 g/m² with a developed pore structure, especially of the mesopore, in comparison with MSP-20. It is considered that inherent ash in bamboo promoted activation, in addition to physical activation by superheated steam. Capacitance per electrode volume (C_V) was 52 F/cm³ with BAC. Because the density of BAC is high (0.78 g/cm³) compared with that of MSP-20 (0.58 g/cm³), sufficient C_V for usage was obtained, although the capacitance per electrode mass (C_M) at 5 mA/cm² itself of BAC (67 F/g) was lower than that of MSP-20 (126 F/g). With IR drop, the resistance value of BAC (9.7 Ω) was lower than that of MSP-20 (10.5 Ω). Especially, the diffusion resistance of BAC disclosed to be smaller than that of MSP-20. These results indicated that BAC produced by steam activation is a promising material with a pore structure suitable for ion transfer in EDLC.     

Rapid harvest schedules and fruit removal as non-chemical approaches for managing spotted wing Drosophila

Spotted wing Drosophila, Drosophila suzukii (Matsumura) (Diptera: Drosophilidae), has caused significant economic losses to small fruit and berry growers throughout the USA and Europe since its invasion. This pest can lay many eggs over its lifetime within ripening and ripe berries, causing yield loss and the risk of fruit contamination. Zero tolerance for this pest has led to increased use of broad-spectrum insecticides to control it, which are costly and pose many other sustainability and pest management concerns. There is an urgent need to evaluate management strategies that can decrease reliance on chemical controls and mitigate economic losses. Over two growing seasons, we compared harvest schedules for their effect on infestation by D. suzukii, revealing that fruit harvested every 1 or 2 days had significantly fewer D. suzukii larvae than a 3-day harvest schedule. Furthermore, we found that yield per unit effort was highest on a 2-day schedule. Sanitation of the crop is another important component of a successful integrated pest management program, and we found that bagging infested waste berries killed 99% of larvae after 32 h, with higher fruit temperatures in clear bags than white or black bags. In combination, these methods can reduce the effects of this invasive pest on raspberry production. This study will provide guidance to growers on culturally based IPM tactics to decrease reliance on chemical management.