The research work was carried out to synthesize a series of novel chitosan based water dispersible polyurethanes (CS-WDPUs). The three step synthesis involves the formation of end capped PU-prepolymer was formed through the reaction between polyethylene glycol (PEG) (Mn=600 g/mole, dimethylolpropionic acid (DMPA) and isophorone diisocyanate (IPDI) followed by the preparation of neutralized NCO terminated PU-prepolymer, which lead to the chain extension by using the chitosan. The dispersion of the obtained product was carried out by adding proper proportion of water. The synthesized CS-WDPUs were applied onto the different qualities of plain weave poly-cotton printed and dyed textile swatches by employing pad-dry-cure procedures. The textile assets of the treated and untreated textile swatches were assessed, as color fastness, pilling resistance, tear and tensile strength. The results showed that the chitosan incorporation into PU backbone has significant effect on the assets of treated textiles. These synthesized CS-WDPUs are eco-friendly bio-based finishes with potential applications for polyester/cotton textiles. 相似文献
Polylactic acid (PLA) is a biodegradable and compostable polymer obtained from annually renewable resources and is acknowledged to be sustainable and non-polluting polymer with substantial commercial prospective as a textile fiber however, there is lack of literature on apparel applications of this polymer. Therefore in this study it was aimed to develop biobased compostable gloves from PLA draw textured melt spun yarns and to examine the effect of yarn linear density, fabric structure and stitch density on thermo-physiological comfort and moisture management properties of PLA based gloves. 100 % PLA based multifilament yarns of two different linear densities were melt spun and later draw textured on false twist texturing machine to be used for gloves knitting. Single jersey and rib structures were produced with two different stitch densities to investigate their effect on thermal conductivity, thermal resistance, relative water vapour permeability, air permeability and moisture management properties of the gloves. Minitab statistical software was employed to analyze the results of test samples. The coefficients of determinations (R2 values) presented good estimation capability of the established regression models. The outcomes of this research may be useful in determining suitable manufacturing requirements of PLA based gloves to accomplish precise thermo-physiological and moisture management properties. 相似文献
Agricultural sector is a major source of employment and export earnings for Pakistan. Exports of Pakistan are highly concentrated in agricultural products including cotton, rice, sugar and fruit. This study analyzed comparative and competitive advantages of the main agricultural products of Pakistan, i.e. cotton, rice and tangerines. Consumption patterns of top exporting countries in each category were also analyzed. Results revealed that Pakistan had strong competitiveness for export of these commodities. Strong potential for growth in the agricultural sector of Pakistan was found and it could be optimized to raise export earnings and meet the objectives of the strategic trade policy framework(STPF) 2015-2018 of Pakistan. 相似文献
Composites based on pure Basalt and Basalt/Jute fabrics were fabricated. The mechanical properties of the composites such as flexural modulus, tensile modulus and impact strength were measured depending upon weave, fiber contents and resin. Dynamic mechanical analysis of all composites were done. From the results it is found that pure basalt fiber combination maintains higher values in all mechanical tests. Thermo-gravimetric (TG/DTG) composites showed that thermal degradation temperatures of composites shifted to higher temperature regions compared to pure jute fabrics. Addition of basalt fiber improved the thermal stability of the composite considerably. Scanning electron microscopic images of tensile fractured composite samples illustrated that better fiber-matrix interfacial interaction occurred in hybrid composites. The thermal conductivity of composites are also investigated and thermal model is used to check their correlation. 相似文献
This study assesses the potential of two contrasted fragrant Pelargonium cultivars to induce pH and dissolved organic carbon (DOC) changes in the soil solution, Pb speciation, and their subsequent effects on rhizosphere phytoavailable Pb.
Materials and methods
Rooted plantlets were grown in special devices, floating on aerated nutrient solution in PVC tanks. This setup allows roots to be physically separated, through a mesh, from a 3-mm soil matrix layer that can be considered as rhizosphere soil. Two contrasted soils, each spiked with Pb-rich particles, emitted from a battery recycling industry, were used at total burdens of 500 and 1500 mg Pb kg?1 in addition to a control unspiked soil. Soil solution pH, phytoavailable Pb, DOC, Pb adsorption, precipitation on roots, and Pb phases in soil and plant were investigated.
Results and discussion
Attar of Roses (Attar) cultivar acidified its rhizosphere by 0.4 pH units in both spiked soils. Concolor Lace (Concolor) was unable to change soil solution pH on soil-1 and increased it by 0.7 units on soil 2. Concentrations of Pb in soil solution from Attar plants were always higher than those of Concolor ones. DOC contents of both unspiked soil-1 and soil-2 without plants were not significantly different. In the case of spiked samples, DOC contents in the rhizosphere soil were increased by three and two times for Attar and Concolor, respectively, compared to the unspiked soil without plant. Both cultivars were able to increase DOC contents, independent of soil type and level of contamination. Accumulation of Pb in shoots and roots was higher in Attar as compared to Concolor due to enhanced available Pb as a result of pH and DOC modifications of the rhizosphere soil. Significant amounts of Pb were adsorbed on roots of both cultivars. X-ray elemental analysis of precipitates on roots revealed the association of Pb with P in cylinder-like structures. Extended X-ray absorption fine structure (EXAFS) spectroscopy revealed that Pb was present, to a major extent in the inorganic form, mainly as PbSO4 in the soil, whereas it was complexed with organic species within plant tissues. The conversion of Pb into organic species could decrease toxicity, may enhance plant tolerance, and could increase translocation.
Conclusions
Plant-induced changes were responsible for the modification of lead phases within the soil. Immobile forms present in the source leaded particles as well as in the soils were converted into soluble species, ultimately improving the phytoavailable or soil solubilized Pb.
Removal of early fruiting branches with greater potassium doses caused more source and no sink at early stages of growth, leading to improved yield, yield components, and fiber quality traits in Bt cotton. The study used manual alteration of plant architecture (F1, no branch removal; F2, removal of first fruiting branch; F3, removal of first and second fruiting branches; F4, removal of all squares from first fruiting branch; F5, removal of all squares from first and second fruiting branches) and potassium rates (50, 100, and 150 kg ha?1) in a randomized complete block design and was repeated for 2 years (2011 and 2012). Increasing potassium application increased total bolls per plant and cotton yield to the greatest levels in F3 and F5, against lowest level in the control. Ginning out turn, fiber length, seed oil, and seed protein content were influenced by fruiting branch or square removal but the difference was less. Increasing potassium improved seed and fiber quality. 相似文献
Exploitation of genetic differences to select wheat cultivars’ pollution-safe from cadmium (Cd) contamination requires better understanding of Cd uptake and translocation patterns. For this purpose, 15 wheat cultivars were grown in nutrient solution and exposed to four levels of Cd, i.e., 0, 15, 30, and 45 µM. The plants were harvested after 2 weeks of Cd exposure. Root and shoot relative dry matter (DM) was decreased in most of the cultivars, but some cultivars did not exhibit any toxic symptoms. The lowest Cd concentration in shoots was recorded for Lasani-2008 and Iqbal-2000 while the highest for Sehar-2006 and Inqlab-91. Both root absorption and translocation accounted for regulating Cd concentration in shoots. There was no relationship between relative DM and Cd concentrations in roots and shoots. The results suggest that wheat cultivars with low shoot Cd concentration but higher tolerance, i.e. Lasani-2008 and Iqbal-2000, could be used in breading programs for low Cd wheat. 相似文献