Calcitriol Treatment Attenuates Uric Acid-Induced Kidney Injury via Super Oxide Dismutase-1 (SOD-1) Upregulation and Fibrosis Reduction

Background:Hyperuricemia induces nephropathy through the mediation of oxidative stress, tubular injury, inflammation, and fibrosis. The high uric acid level is associated with the reduction of vitamin D levels. However, the reno-protective effects of this vitamin in hyperuricemia condition remain unknown. This study aimed to elucidate calcitriol treatment in a uric acid-induced hyperuricemia mice model. Methods:Uric acid (125 mg/kg BW) was administered intraperitoneally for 7 (UA7) and 14 (UA14) days. Calcitriol (0.5 g/kg BW) was intraperitoneally injected for the following seven days, after 14 days of uric acid induction (UA14VD7 group). The control group received NaCl 0.9%, by the same route. Serum creatinine was measured using calorimetric method, and uric acid levels were assessed using enzymatic calorimetric assay. Tubular injury and fibrosis were assessed using PAS and Sirius red staining. RT-PCR and qRT-PCR were carried out for the analyses of SOD-1, Collagen-1, and TGF-1 mRNA expression in the kidney. Immunostaining of SOD-1 was performed to detect its expression in the kidney. Results:Uric acid and creatinine levels markedly increased in UA14 groups, followed by an exacerbation of tubular injury. RT-PCR revealed the upregulation of Collagen-1 and TGF-1, along with the downregulation of SOD-1. Calcitriol treatment attenuated the injury with reducing uric acid and creatinine levels, as well as tubular injury. This was associated with lower Collagen-1 and TGF-1 mRNA expression compared to the UA7 and UA14 groups. SOD-1 was upregulated in epithelial cells in the UA14VD7 group. Conclusion:Calcitriol treatment after uric acid induction may attenuate kidney injury through upregulation of SOD-1 and downregulation of Collagen-1 and TGF-1 gene expression. Key Words: Fibrosis, Hyperuricemia, Kidney injury, Superoxide dismutase-1, Vitamin D     

Genetic variation for shoot elongation before winter and its correlation with vernalization requirement in winter oilseed rape (<Emphasis Type="Italic">Brassica napus</Emphasis> L.)

Changing climatic conditions in north-western Europe are accompanied by occasional extreme weather conditions. This requires breeding of winter oilseed rape cultivars which are resilient to diverse abiotic stress factors, e.g. frost, drought and heat. The degree of vernalization requirement of winter oilseed rape has been found to be related to frost tolerance and winter hardiness. Shoot elongation before winter in particular has been identified as one decisive factor for frost tolerance in winter oilseed rape. However, the relationship between vernalization requirement and shoot elongation before winter is not known. In the present study the genetic variation for shoot elongation before winter and vernalization requirement of 19 genetic diverse breeding lines and cultivars were analyzed. Autumn and spring sown field experiments in multiple environments were performed to determine shoot elongation before winter and vernalization requirement, respectively. In spring sown field experiments, genotypes with a low vernalization requirement were characterized by the occurrence of long bolting plants with flower buds. Large and significant genotypic variation was found for shoot length in the autumn sown and spring sown environment. Broad sense heritability was quite high for shoot length in the spring sown environment (h²?=?97%), whereas it was only of medium size for shoot length before winter (h²?=?62%). Although the correlation between shoot length before winter and shoot length in the spring sown environment was positive (Spearman’s rank r_S?=?0.48*), a number of genotypes with reduced shoot elongation before winter and low vernalization requirement were identified. Results indicate that genotypes with a reduced shoot elongation before winter independent of their vernalization requirement can be selected in breeding programs.     

Identification of superior parents and hybrids for improving canola production under optimum and late sowing conditions

Major advancement in canola breeding depends on heterotic hybrids that require high general combining ability (GCA) and specific combining ability (SCA) inbred lines. In order to estimate heritability, gene action type, GCA, SCA and heterosis and to identify superior hybrids with wider adaptation to cold, one hundred canola hybrids were produced by crossing 10 lines and 10 testers in a Line?×?Tester mating design. The F₁ and F₂ generations were sown in α-lattice design in 2012 and 2013 growing seasons under optimum (early October) and late sowing (early November) conditions to be evaluated for days to flowering, days to physiological maturity, number of pods per plant, number of seeds per pod, thousand seed weight, seed yield and leaf electrical conductivity. The combined analysis indicated sufficient genetic diversity in the population and significant difference between two sowing date. The Line?×?Tester analysis presented significant GCA and SCA effects for all studied traits across optimum and late sowing conditions. The main gene action type was found to be non-additive, especially incomplete dominance and over-dominance in both conditions. Narrow-sense heritability ranged from low to moderate whereas broad-sense heritability was recorded more than 60% for all of the studied traits in both generations and conditions. The average heterosis in F₂ population for all studied traits was lower than that in F₁ representing this fact that heterosis is generally related to the heterozygosity at the population level and poorly correlated with heterozygosity at the individual level.     

Evaluating and modeling the spatiotemporal pattern of regional-scale salinized land expansion in highly sensitive shoreline landscape of southeastern Iran

Taking an area of about 2.3×10⁴ km² of southeastern Iran, this study aims to detect and predict regional-scale salt-affected lands. Three sets of Landsat images, each set containing 4 images for 1986, 2000, and 2015 were acquired as the main source of data. Radiometric, atmospheric and cutline blending methods were used to improve the quality of images and help better classify salinized land areas under the support vector machine method. A set of landscape metrics was also employed to detect the spatial pattern of salinized land expansion from 1986 to 2015. Four factors including distance to sea, distance to sea water channels, slope, and elevation were identified as the main contributing factors to land salinization. These factors were then integrated using the multi-criteria evaluation (MCE) procedure to generate land sensitivity map to salinization and also to calibrate the cellular-automata (CA) Markov chain (CA-Markov) model for simulation of salt-affected lands up to 2030, 2040 and 2050. The results of this study showed a dramatic dispersive expansion of salinized land from 7.7 % to 12.7% of the total study area from 1986 to 2015. The majority of areas prone to salinization and the highest sensitivity of land to salinization was found to be in the southeastern parts of the region. The result of the MCE-informed CA-Markov model revealed that 20.3% of the study area is likely to be converted to salinized lands by 2050. The findings of this research provided a view of the magnitude and direction of salinized land expansion in a past-to-future time period which should be considered in future land development strategies.     

Effect of different permeable and non-permeable cryoprotectants on the hatching rate of rainbow trout (<Emphasis Type="Italic">Oncorhynchus mykiss</Emphasis>) embryos

The purpose of the present study was to investigate the toxicity of cryoprotectants on the hatching rate of rainbow trout (Oncorhynchus mykiss) embryos. Epiboly and first eye pigmentation stage embryos were immersed in six permeable cryoprotectants, dimethyl sulfoxide (DMSO), glycerol (Gly), methanol (MeOH), propylene glycol (PG), ethylene glycol (EG), and acetamide (Ac), in concentrations of 1–5 M for 5 or 10 min and two non-permeable cryoprotectants, sucrose (Suc) (10%, 15%, 20%) and polyvinyl pyrrolidone (PVP) (5%, 10%, 15%) for 5 min. The embryos were then washed and incubated until hatching occurred. The toxicity of the cryoprotectant was assessed by the hatching rate. The results illustrated that permeable cryoprotectant toxicity for rainbow trout embryos increased in the order of PG < DMSO < MeOH < Gly < EG < Ac. The hatching rate of the embryos treated with permeable cryoprotectants decreased (P < 0.05) with increased concentration and duration of exposure. There were no significant decreases in hatching rate of embryos treated with sucrose and PVP with the increase of concentration; sucrose had higher hatching rates than PVP. Rainbow trout embryos at first eye pigmentation stage exhibited greater tolerance to cryoprotectants than embryos at epiboly stage.     

Synthesis and Characterization of Aqueous Chitosan-polyurethanes Dispersion for Textile Applications with Multipurpose Performance Profile

As the use of high performance textiles has grown, the need for chemical finishes to provide the fabric properties required in the special applications has grown accordingly. In this project, a series of water dispersible polyurethanes dispersion (CS-PUs) with multipurpose performance profile was developed using isophorone diisocyanate (IPDI), polyethylene glycol (PEG), 2,2-dimethylol propionic acid (DMPA) and chitosan (CS) for textile applications. In two step synthesis process, NCO functional PU prepolymers prepared by reacting IPDI, PEG, and DMPA were extended with varying molar quantities of chitosan followed by structural characterization through FTIR. The prepared CS-PU dispersions were applied onto the dyed and printed poly-cotton blend fabrics. The performance behavior of the treated fabric in terms of crease recovery, tear strength, tensile strength, and antibacterial properties was evaluated by applying standard test methods. These investigations show that the CS-PU dispersions can be applied as antibacterial textile finishes with significant improvement in the physical and mechanical properties of poly-cotton fabrics.     

Influence of Hydrophobicity of Acetylated Nanocellulose on the Mechanical Performance of Nitrile Butadiene Rubber (NBR) Composites

Novel acetylation process by substitution of acetic anhydride substitution with hydroxyl groups on nanocellulose (NCC) has been explored to increase its dispersion and interaction in nitrile butadiene (NBR) matrix. The crystallinity index was increased after modification when compared to unmodified NCC, but no significant different with increases of treatment time from 1 hour to 3 hours treatments proven by X-ray diffraction (XRD) results. The Fourier transform infra-red (FTIR) showed the existent of acetyl groups on surface of the NCC after treatment by existent of the peak 1736 cm^-1 that attributed to carbonyl groups some peaks were observed at 1430, 1361 and 1248 cm^-1 and confirmed on the acetylation process. The nuclear magnetic resonance (NMR) also show the present of acetyl groups by existent of the signal of proton methyl group at 1.90 ppm and new peaks at 5.42, 4.70 and 4.34 ppm, for all ACN samples. The thermal results by thermo gravimetric analysis (TGA) and differential scanning calorimetry (DSC) showed that the acetylated NCCs were 10 % more thermally stable. Transmission electron microscopic (TEM) results showed that no significant changes were observed due to the acetylation process. The results also showed well distributed of individual NCC after acetylation, this improvement was primarily attributed to uniform dispersion of the ACN-NCC and less aggregated occurred. Due to its hydrophobic characteristics, highly crystalline and nano size, ACN-NCC brought a significant improvement up to 25 % on the mechanical properties of nitrile butadiene (NBR) rubber composites.     

Immobilization of Cationic Titanium Dioxide (TiO<Subscript>2</Subscript><Superscript>+</Superscript>) on Electrospun Nanofibrous Mat: Synthesis,Characterization, and Potential Environmental Application

We report a facile approach to fabrication and characterization of cationic titanium dioxide (TiO₂⁺) on poly (vinyl alcohol)/poly (acrylic acid) (PVA/PAA) composite electro-spun nanofibrous mat. The aim of this study is to develop a “functional electrospun nanofibrous mat” as a sustainable approach to superior photocatalytic degradation of organic colorants. For that, the PVA/PAA nanofibrous mat was prepared by electrospinning of PVA and PAA solution according to an aspect ratio of 1:1 and later water stability was induced by the thermal cross linking at an elevated temperature of 145 °C for 30 minute. By means of electrostatic layer-by-layer (LbL) assembly, cationic titanium dioxide (TiO₂⁺, ~19 nm) was immobilized on the surface of the water stable nanofibrous mat. As functionalized composited nanofibrous mat was characterized by using scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) analysis and thermogravimetric analysis (TGA). Superior competency of the functionalized nanofibrous mat towards photocatalytic degradation of organic dye (methyl blue) in aqueous solution was observed by using UV-visible spectrophotometer with quantitative measuring method. The result indicates a complete degradation of methyl blue within 40 mins and superior reusability upto 5 cycles application. The study signifies the prospect of using electrospun nanofibers to manipulate the catalytic activity, which could be a foundation for further rational design of various composite nanofibrous materials.     

Effects of arbuscular mycorrhizal fungal symbiosis for control of Egyptian broomrape (Orobanche aegyptiaca Pers.) in tomato (Lycopersicon esculentum L.) cultivation

The present study assessed the effect of arbuscular mycorrhizal fungi (AMF) on broomrape (Orobanche aegyptiaca Pers.) control to determine its effects on tomato (Lycopersicon esculentum L.) growth indices. This experiment was carried out using a randomized complete block design with four replications. The treatments included three strains of AMF (Glomus mosseae, Glomus intraradices and Glomuse hoe ) at three levels (100, 200 and 300 kg ha^?1). The control treatments (without mycorrhiza) were with and without broomrape (weed infest and weed free). The results showed that the use of G. intraradices and G. mosseae decreased broomrape seed germination, the number of nodules and the dry weight of the broomrape and increased root area and dry weight of the tomato plant when compared to G. hoe and the control treatments without broomrape. The tomato yield in G. intraradices 300 kg ha^?1 treatment increased by 10 and 205% than weed free and weed infest treatments, respectively. Finally, G. intraradices and G. mosseae at, respectively, 200 and 300 kg ha^?1 are recommended for land under tomato cultivation that has been contaminated with broomrape.