Correlation between C-reactive protein level,immunology, and hematology of a <Emphasis Type="Italic">Oncorhynchus mykiss</Emphasis> infected with <Emphasis Type="Italic">Lactococcus garvieae</Emphasis>

The aim of this experiment was to evaluate the symptoms, variation, and correlation of hematological factors and some parameters of the innate immune response of the infected rainbow trout (Oncorhynchus mykiss) fish with Lactococcus garvieae bacteria. A total of 270 fish were divided into three groups including infected fish with a high and low concentration of L. garvieae and a control group without infection. The blood and tissue (brain, head, kidney, and spleen) samples were collected from each group (n?=?6 fish) at 0, 3, 14, and 21 days after treatment. The most observed symptoms during infection were lethargy, exophthalmia, and ascites. The mortality rates for the high and low dose-infected fish were defined as 60 and 25%, respectively. The infected groups had significantly (p?<?0.05) higher activity of serum lysozyme, myeloperoxidase, classical and alternative pathways of complement, serum bactericidal effects, and the specific antibody titer. Also, a significant (p?<?0.05) lower hematocrit and hemoglobin levels and higher white blood cell numbers were observed in the infected groups. A significant correlation was observed between the CRP levels and some of the hematological and immunological indices as bactericidal effects, classical complement pathways, lysozyme activity myeloperoxidase activity, white blood cell numbers, and hematocrit levels. The clinical symptoms, immune responses, and hematological indices variation among L. garvieae-infected fish are dependent on the duration and bacterial dose of the infection.     

Effect of different permeable and non-permeable cryoprotectants on the hatching rate of rainbow trout (<Emphasis Type="Italic">Oncorhynchus mykiss</Emphasis>) embryos

The purpose of the present study was to investigate the toxicity of cryoprotectants on the hatching rate of rainbow trout (Oncorhynchus mykiss) embryos. Epiboly and first eye pigmentation stage embryos were immersed in six permeable cryoprotectants, dimethyl sulfoxide (DMSO), glycerol (Gly), methanol (MeOH), propylene glycol (PG), ethylene glycol (EG), and acetamide (Ac), in concentrations of 1–5 M for 5 or 10 min and two non-permeable cryoprotectants, sucrose (Suc) (10%, 15%, 20%) and polyvinyl pyrrolidone (PVP) (5%, 10%, 15%) for 5 min. The embryos were then washed and incubated until hatching occurred. The toxicity of the cryoprotectant was assessed by the hatching rate. The results illustrated that permeable cryoprotectant toxicity for rainbow trout embryos increased in the order of PG < DMSO < MeOH < Gly < EG < Ac. The hatching rate of the embryos treated with permeable cryoprotectants decreased (P < 0.05) with increased concentration and duration of exposure. There were no significant decreases in hatching rate of embryos treated with sucrose and PVP with the increase of concentration; sucrose had higher hatching rates than PVP. Rainbow trout embryos at first eye pigmentation stage exhibited greater tolerance to cryoprotectants than embryos at epiboly stage.     

Synthesis and Characterization of Aqueous Chitosan-polyurethanes Dispersion for Textile Applications with Multipurpose Performance Profile

As the use of high performance textiles has grown, the need for chemical finishes to provide the fabric properties required in the special applications has grown accordingly. In this project, a series of water dispersible polyurethanes dispersion (CS-PUs) with multipurpose performance profile was developed using isophorone diisocyanate (IPDI), polyethylene glycol (PEG), 2,2-dimethylol propionic acid (DMPA) and chitosan (CS) for textile applications. In two step synthesis process, NCO functional PU prepolymers prepared by reacting IPDI, PEG, and DMPA were extended with varying molar quantities of chitosan followed by structural characterization through FTIR. The prepared CS-PU dispersions were applied onto the dyed and printed poly-cotton blend fabrics. The performance behavior of the treated fabric in terms of crease recovery, tear strength, tensile strength, and antibacterial properties was evaluated by applying standard test methods. These investigations show that the CS-PU dispersions can be applied as antibacterial textile finishes with significant improvement in the physical and mechanical properties of poly-cotton fabrics.     

Influence of Hydrophobicity of Acetylated Nanocellulose on the Mechanical Performance of Nitrile Butadiene Rubber (NBR) Composites

Novel acetylation process by substitution of acetic anhydride substitution with hydroxyl groups on nanocellulose (NCC) has been explored to increase its dispersion and interaction in nitrile butadiene (NBR) matrix. The crystallinity index was increased after modification when compared to unmodified NCC, but no significant different with increases of treatment time from 1 hour to 3 hours treatments proven by X-ray diffraction (XRD) results. The Fourier transform infra-red (FTIR) showed the existent of acetyl groups on surface of the NCC after treatment by existent of the peak 1736 cm^-1 that attributed to carbonyl groups some peaks were observed at 1430, 1361 and 1248 cm^-1 and confirmed on the acetylation process. The nuclear magnetic resonance (NMR) also show the present of acetyl groups by existent of the signal of proton methyl group at 1.90 ppm and new peaks at 5.42, 4.70 and 4.34 ppm, for all ACN samples. The thermal results by thermo gravimetric analysis (TGA) and differential scanning calorimetry (DSC) showed that the acetylated NCCs were 10 % more thermally stable. Transmission electron microscopic (TEM) results showed that no significant changes were observed due to the acetylation process. The results also showed well distributed of individual NCC after acetylation, this improvement was primarily attributed to uniform dispersion of the ACN-NCC and less aggregated occurred. Due to its hydrophobic characteristics, highly crystalline and nano size, ACN-NCC brought a significant improvement up to 25 % on the mechanical properties of nitrile butadiene (NBR) rubber composites.     

Immobilization of Cationic Titanium Dioxide (TiO<Subscript>2</Subscript><Superscript>+</Superscript>) on Electrospun Nanofibrous Mat: Synthesis,Characterization, and Potential Environmental Application

We report a facile approach to fabrication and characterization of cationic titanium dioxide (TiO₂⁺) on poly (vinyl alcohol)/poly (acrylic acid) (PVA/PAA) composite electro-spun nanofibrous mat. The aim of this study is to develop a “functional electrospun nanofibrous mat” as a sustainable approach to superior photocatalytic degradation of organic colorants. For that, the PVA/PAA nanofibrous mat was prepared by electrospinning of PVA and PAA solution according to an aspect ratio of 1:1 and later water stability was induced by the thermal cross linking at an elevated temperature of 145 °C for 30 minute. By means of electrostatic layer-by-layer (LbL) assembly, cationic titanium dioxide (TiO₂⁺, ~19 nm) was immobilized on the surface of the water stable nanofibrous mat. As functionalized composited nanofibrous mat was characterized by using scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) analysis and thermogravimetric analysis (TGA). Superior competency of the functionalized nanofibrous mat towards photocatalytic degradation of organic dye (methyl blue) in aqueous solution was observed by using UV-visible spectrophotometer with quantitative measuring method. The result indicates a complete degradation of methyl blue within 40 mins and superior reusability upto 5 cycles application. The study signifies the prospect of using electrospun nanofibers to manipulate the catalytic activity, which could be a foundation for further rational design of various composite nanofibrous materials.     

Effects of arbuscular mycorrhizal fungal symbiosis for control of Egyptian broomrape (Orobanche aegyptiaca Pers.) in tomato (Lycopersicon esculentum L.) cultivation

The present study assessed the effect of arbuscular mycorrhizal fungi (AMF) on broomrape (Orobanche aegyptiaca Pers.) control to determine its effects on tomato (Lycopersicon esculentum L.) growth indices. This experiment was carried out using a randomized complete block design with four replications. The treatments included three strains of AMF (Glomus mosseae, Glomus intraradices and Glomuse hoe ) at three levels (100, 200 and 300 kg ha^?1). The control treatments (without mycorrhiza) were with and without broomrape (weed infest and weed free). The results showed that the use of G. intraradices and G. mosseae decreased broomrape seed germination, the number of nodules and the dry weight of the broomrape and increased root area and dry weight of the tomato plant when compared to G. hoe and the control treatments without broomrape. The tomato yield in G. intraradices 300 kg ha^?1 treatment increased by 10 and 205% than weed free and weed infest treatments, respectively. Finally, G. intraradices and G. mosseae at, respectively, 200 and 300 kg ha^?1 are recommended for land under tomato cultivation that has been contaminated with broomrape.     

Thermal and oxidation protection of carbon fiber by continuous liquid phase pre-ceramic coatings for high temperature application

Thermal and oxidation resistant coating is necessary for carbon fiber (CF) in CF reinforced concrete (CFRC) composite application in order to fulfil a high level of safety standard in case of fire. Pre-ceramic coatings such as Polysilazane, Polysiloxane, and Methyl silicone resin have been deposited on CF filament yarn by means of wet chemical continuous dip coating method. The surface analyses e.g. scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and infrared spectroscopy (IR) results showed the changes of surface morphology by the coatings. Thermo gravimetric analysis (TGA) revealed that the high temperature (up to 800 °C) oxidation stability of CF was significantly improved with coatings. Thermo-mechanical properties also significantly enhanced up to 600 °C. CF yarn retains its original strength and elasticity modulus/stiffness at 700 °C due to thermal and oxidation resistant coatings.     

Utilization of Site-Specific Recombination in Biopharmaceutical Production

Mammalian expression systems, due to their capacity in post-translational modification, are preferred systems for biopharmaceutical protein production. Several recombinant protein systems have been introduced to the market, most of which are under clinical development. In spite of significant improvements such as cell line engineering, introducing novel expression methods, gene silencing and process development, expression level is unpredictable and unstable because of the random location of integration in the genome. Site-specific recombination techniques are capable of producing stable and high producer clonal cells; therefore, they are gaining more importance in the biopharmaceutical production. Site-specific recombination methods increase the recombinant protein production by specifically inserting a vector at a locus with specific expression trait. The present review focused on the latest developments in site-specific recombination techniques, their specific features and comparisons.