Soil water affects transpiration response to rainfall and vapor pressure deficit in poplar plantation

Influences of environmental factors on transpiration are interactive. Sensitivities of transpiration responses to both evaporative demand and rainfall under contrasting soil water conditions constitute the physiological basis of the drought tolerance of trees. Such knowledge is practically significant for plantation management, especially for irrigation management. We therefore conducted a 6-year study on the transpiration of a poplar plantation in temperate China to elucidate the existence and pattern of the influence of the soil water over stand transpiration responses to (1) vapor pressure deficit (VPD), the major indicator of air dryness and (2) the rainfall, in terms of total amount and event size. The results showed that the response of plantation transpiration (E _c ) to VPD was conditioned by soil moisture. There was a significant difference in the frequency distribution of maximum sap flux under contrasting soil relative extractable water. E _c after rainfall of different sizes varied under similar VPD. The increasing occurrences of only large rainfall events led to enhanced total E _c during the growing season, but prolonged rainless intervals did not lead to a continuous decrease of E _c , suggesting appreciable supplements from the soil water were present to sustain transpiration. In addition, the balance of soil water between replenishment and extraction also conditioned the influence of rainfall over subsequent E _c during the respective rainless intervals. Based on the E _c responses to VPD and rainfall under different soil moisture levels, irrigation that directly replenishes the deep soil layers in order to alleviate water stress on transpiration during the small-rain event-dominated growing season is an effective and water-saving approach to guarantee trees survival during drought period.     

Prediction of bending properties for structural glulam using optimized distributions of knot characteristics and laminar MOE

This study established a prediction model for bending properties of glued-laminated timber (glulam) using optimized knot and modulus of elasticity (MOE) distributions of lumber laminate as the main input variables. For this purpose, knot and MOE data were investigated for all pieces of lumber that were prepared for glulam manufacturing, and statistical distributions of knot size, knot number in one lumber, and MOE of each laminate were optimized as distribution functions. These knot and MOE data were used as input variables in the prediction model for bending properties, and were also used in generating virtual glulam using the inverse transform method. Prediction of bending properties for glulam was carried out using the transformed section method, which is partially provided in ASTM D 3737 (Annex A4). Predicted values were compared with those from full-scale four-point bending tests for 60 six-layered glulams with 10 different laminar combinations. Finally, the allowable bending properties of glulam for each specific laminate combination were determined by calculating the fifth percentile of the modulus of rupture and the average modulus of elasticity from virtual test results of more than 1000 virtual glulams. From the results of this study, predicted bending properties for glulam and their distributions could be used for structural design in both allowable stress design and limit state design.     

多重实时RT-PCR快速检测新型甲型H1N1流感病毒

从GenBank中获取新型甲型H1N1流感病毒(2009年流行株)HA和NA基因序列,通过多重序列比对之后,设计合成H1和N1基因特异性的引物和探针,用来建立新的甲型H1N1亚型流感病毒的多重实时RT-PCR检测方法.合成的两条荧光探针分别标记FAM和CY5荧光报告基团,荧光淬灭均使用BHQ基团.多重实时RT-PCR实验在ABl7500实时PCR仪上进行,经过40个循环的扩增之后,阳性对照出现标准的S型曲线,并且具有良好的特异性,可以很好地将新的甲型H1N1与传统的甲型H1N1以及H3N2、H5N1、H6N2和H9N2等流感病毒区分.多重实时RT-PCR可以检测到10个拷贝的模板,灵敏度接近检测方法的极限.检测时间短,从加样到反应结束只需要90 min.在对243例发热病人临床样品检测过程中发现7例阳性,1351份猪临床样品检测中未发现阳性,该检测结果和采用中国检验检疫科学研究院研制的试剂盒获得的检测结果一致.本研究所建立的快速、准确和高敏感性的多重实时RT-PCR方法非常适用于新型甲型H1N1流感病毒的实验室筛查.     

半夏干物质积累与氮、磷、钾吸收特点的研究

在田间条件下,研究了一年内半夏二个生长季的干物质积累与氮、磷、钾积累的特点及其相互关系。结果看出,半夏植株在苗期干物质积累较慢,珠芽形成和块茎膨大期积累迅速,生长后期（倒苗期）则又减慢。植株对氮、磷、钾的吸收特点与干物质积累趋势基本一致。不同生长期半夏对氮、磷、钾的吸收量不同。在第一生长季,出苗后生长30 d内对氮、磷、钾的吸收量较少,分别占该生长季吸收量的30.6%,27.7%和27.8%;生长至60 d时吸收量迅速增加,分别占该生长季的43.6%,52.3%和49.0%;60 d以后其吸收量又逐渐减少。半夏第二生长季对氮磷钾的吸收特点与第一生长季的基本一致。表明半夏一年内以对氮的吸收量最多,钾次之,磷最少,氮、磷、钾的吸收比例为1﹕0.63﹕0.87。     

不同间作绿肥替代化肥模式对木薯性状和产量的影响

通过探讨秸秆还田与化肥减施下间作绿肥对木薯产量性状的影响,着力解决连作木薯土壤肥力提高与改良相关技术的协调增效。于2019-2020年,以木薯品种“南美1号”为供试材料,设置8个处理,调查每个小区的木薯茎径、叶绿素（SPAD）、块根直径、块根长、单株茎秆鲜重、单株块根鲜重、株高、单片叶重、单株块根数以及小区产量等农艺性状。结果表明,处理5（木薯秆还田+化肥减量12.5%+12.5%营养元素当量黑豆绿肥还田）的木薯产量最高,并得到拟合方程。绿肥秸秆还田以及间作绿肥从整体上改良了土壤肥力,并通过显著影响木薯块根、单片叶重以及单株块根数而影响最终产量。     

野生玫瑰抗旱性地理变异的初步研究

以吉林珲春,山东牟平,山东荣成3个地理种源的野生玫瑰为材料进行盆栽试验,研究了干旱胁迫下玫瑰的生理生化变化与抗旱性强弱。结果表明,干旱胁迫条件下, 3个种源野生玫瑰的5个抗旱生理生化指标的变化趋势基本一致,但各指标的变化程度因种源不同而异。通过“坐标综合评定方法”对5个生理生化指标进行综合评定,得到3个种源野生玫瑰的抗旱性强弱等级依次为吉林珲春,山东牟平,山东荣成。     

水稻潜根线虫生防菌筛选、鉴定及其杀线虫活性研究

水稻潜根线虫在世界各稻区均普遍发生,给水稻生产造成一定的经济损失。从前期对根结线虫有较好毒杀活性的9个菌株中筛选出对水稻潜根线虫有很好毒杀效果的菌株。结果表明,2周发酵液2.5倍稀释液处理水稻潜根线虫,菌株ZW-1和XO-2对潜根线虫毒杀活性较强,72h的死亡率分别为93.7%和96.7%,LC₅₀值分别为90.4451和76.3875μL/mL。根据形态学特征和rDNA-ITS序列分析,鉴定菌株ZW-1和XO-2分别为日本曲霉(Aspergillus japonicus)和黑曲霉(A.niger)。这些生防真菌菌株的发掘,为植物线虫病害的生物防治提供了新的微生物资源。     

2CZD-1型段茎式甘蔗种植机设计与试验

研制了2CZD-1型段茎式甘蔗种植机,可一次性完成甘蔗种植的开沟、施肥、自动取种、自动排种、覆土和覆膜等工序,适用于宽窄行甘蔗种植。设计了机架、取送种机构、转盘施肥机构、旋耕覆土机构、覆膜机构和液压传动系统等结构,其中取送种机构采用排冗结构实现均匀排种。利用有限元分析软件ANSYS对甘蔗种植机的机架进行模态分析,并通过田间试验获得甘蔗种植机的覆土厚度合格率、种植密度、伤芽率、漏植率及总排肥量稳定性变异系数等性能参数。模拟结果表明,当激励频率为8~80 Hz时,机架容易发生共振,且最大位移可达28.12 mm。田间试验表明,该种植机的种植密度为142325芽/hm^2,覆土厚度合格率为93.6%,伤芽率为2.8%,漏植率为4.7%,种植深度合格率为89.3%,总排肥量稳定性变异系数为5.8%,工作生产率为0.32 hm2/h,符合甘蔗种植机的设计要求,能够显著提高甘蔗种植的效率。     

甘蔗分段收获经济效益分析

介绍了由4GZ-9型甘蔗割铺机、6BZ-5型甘蔗剥叶机以及7TS-15型甘蔗装载机组成的最小甘蔗收获系统,并对该系统进行了应用效益分析。通过分析说明采用分段式甘蔗收获技术在经济上是可行的,在目前国情下宜以分段收获作为切入点,促进我国甘蔗收获逐步实现机械化作业。