Reproductive stage tolerance to salinity and alkalinity stresses in rice genotypes

Salinity and alkalinity (sodicity) seriously threaten rice production in south Asia. Improving screening methodologies for identifying sources of tolerance is crucial for breeding salt tolerant rices. Rice genotypes of varying tolerance (tolerant, semi‐tolerant and sensitive) were screened in saline soil of electrical conductivity, ECe 4 and 8 dS/m and alkali soil of pH 9.5 and 9.8 in lysimeters. Vegetative growth events were less affected by both the stresses in comparison to reproductive stage. Grain yield was reduced by 26.7%, 45.7% and 50.3% at ECe 8 dS/m in three tolerance groups respectively. At pH 9.8 the reduction was 25.1%, 37.2% and 67.6% in the three groups respectively. Higher floret fertility contributed to higher seed set and grain yields in tolerant genotypes whereas higher spikelet sterility led to poor seed set and lower grain yields in sensitive genotypes. The 1000 grains weight was also significantly reduced at ECe 4 or pH 9.8. Screening at reproductive stage for morphological traits like floret fertility is thus more useful to identify rice genotypes tolerant to both salinity and alkalinity stress. Genotypic (G) and environmental (E) effects and GE interactions were highly significant for the growth attributes and grain yield. Based on analysis of variance, genotypes tolerant to salinity and alkalinity as well to both the stresses were identified.     

Papaya yellow leaf curl virus: A newly identified begomovirus infecting Carica papaya L. from the Indian Subcontinent

India is one of the world’s largest producers of papaya. Viruses, mainly begomoviruses and potyviruses, cause a significant loss in papaya production. The study described here has identified a new species of begomovirus and a new species of betasatellite infecting Carica papaya in India. The sequences of the begomovirus and betasatellite show 90.03% nucleotide sequence identity to an isolate of Radish leaf curl virus and 92.25% identity to an isolate of Tomato leaf curl betasatellite, respectively. Maximum likelihood phylogenetic tree of begomovirus sequence of isolate DP2 (KX353622) showed distant relationships with previously characterised begomoviruses. Recombination analysis proposed six recombination breakpoints in begomovirus genome with other geographical begomovirus isolates.     

Role of micronutrients on quantitative traits and prospects of its accumulation in linseed (Linum usitatissimum L.)

The adequate growth of plants can be achieved only by a balanced ratio of biologically active nutrients in soil along with its readily availability. Linseed seems to be an advantageous secondary oilseed crop widely used in industrial purposes, which can serve additional purpose of phytoextraction of heavily infested soils with heavy metals. In this study, we have made an effort to find out the optimum dose of heavy metals necessary as micronutrients like copper (Cu), iron (Fe) and zinc (Zn) for the enhancement of linseed yield along with the distribution of heavy metals in different plant parts. Quantitative enhancement in different traits of linseed plant due to Cu, Fe and Zn fertilization especially for capsules per plant after maturity suggested positive association between heavy metal supply and morphological traits, which indirectly enhanced seed yield. There was a positive correlation between Zn supply and seed yield. In the treatments with Cu and Fe fertilization, seed yield was positively correlated to plant height, capsules per plant and seeds per five capsules. According to this study, it is concluded that linseed has the ability to accumulate majorly Fe followed by Cu and Zn.     

Comparative evaluation of MCP gene in worldwide strains of Megalocytivirus (Iridoviridae family) for early diagnostic marker

Members of the Iridoviridae family have been considered as aetiological agents of iridovirus diseases, causing fish mortalities and economic losses all over the world. Virus identification based on candidate gene sequencing is faster, more accurate and more reliable than other traditional phenotype methodologies. Iridoviridae viruses are covered by a protein shell (capsid) encoded by the important candidate gene, major capsid protein (MCP). In this study, we investigated the potential of the MCP gene for use in the diagnosis and identification of infections caused Megalocytivirus of the Iridoviridae family. We selected data of 66 Iridoviridae family isolates (53 strains of Megalocytivirus, eight strains of iridoviruses and five strains of Ranavirus) infecting various species of fish distributed all over the world. A total of 53 strains of Megalocytivirus were used for designing the complete primer sets for identifying the most hypervariable region of the MCP gene. Further, our in silico analysis of 102 sequences of related and unrelated viruses reconfirms that primer sets could identify strains more specifically and offers a useful and fast alternative for routine clinical laboratory testing. Our findings suggest that phenotype observation along with diagnosis using universal primer sets can help detect infection or carriers at an early stage.     

Impact of Aeration on the Growth Performance of Silver Barb,Puntius gonionotus,during Fingerling Rearing

Impact of aeration on growth of silver barb, Puntius gonionotus during fingerling rearing was studied through a 100‐d rearing experiment conducted in 18 concrete tanks of 50 m² (10 × 5 × 1.2 m) size. Fry (0.74 ± 0.27 g, 35 ± 6 mm) were stocked in the experimental tanks at three stocking densities (25, 50, and 75 fry/m²) and were evaluated with and without provision of 6 h (2400–0600 h) of night time aeration. Aeration resulted in higher pH and dissolved oxygen regime and increased fingerling length and weight. The results suggest a rearing density of 75/m² to be ideal for rearing fry to fingerling of this species when aeration is provided, whereas, under non‐aerated condition, rearing the fry to fingerling stage at 50/m² was found advantageous over those at 25 and 75/m².     

Effects of water exchange protocols on water quality,sedimentation rate and production performance of Penaeus monodon in earthen ponds

This study was carried out in farmers' fields to quantify the total water and consumptive water use in grow‐out culture of Penaeus monodon under recommended package of practice with two different water management protocols: T₁, with no water exchange and T₂, with regulated water exchange. Treatment‐wise estimated total water use, was 2.09 and 2.43 ha‐m 122 day^?1, while the computed consumptive water use index (m³ kg^?1 biomass) was 5.35 and 6.02 in T₁ and T₂ respectively. Lower rates of water exchange (T₂) showed significantly improved (P < 0.05) crop performance in terms of performance index (19.75 ± 0.75), production‐size index (74.1 ± 3.4), survival rate (80.13 ± 1.7%) and productivity (2.44 ± 0.08 t) over the zero water exchange. The shrimp pond water quality suitability index (WQSI) infers that regulated water exchange (T₂) improved the overall suitability of water quality for shrimp culture. WQSI up to 90 days of culture ranged between 7.5–9.0 in T₂, needs little management while in the last month of rearing, it was good with moderate management requirements. Treatment‐wise sediment load ranged between 50.4–56.3 m³ t^?1 shrimp biomass. High intensity of water exchange and low apparent feed conversion ratio influenced in lowering the sedimentation rate. Regulated water exchange protocol (T₂) performed well (higher net total water productivity and net consumptive water productivity) against no water exchange (T₁). A higher OV:CC ratio (ratio of the output value to the cost of cultivation) indicated that T₂ had a distinct edge over the T₁ protocol.     

Evaluation of selected metal nanoparticles on hatching and survival of larvae and fry of Indian major carp,rohu (Labeo rohita)

Different laboratory synthesized metal nanoparticles viz. Copper oxide (CuO), Zinc oxide (ZnO) and silver doped titanium dioxide (Ag‐TiO₂) were studied for their effect on hatching and survival of larvae and fry of Indian major carp, rohu, Labeo rohita both in direct application in tank water & coated onto tanks. Among these nanoparticles, CuO and ZnO nanoparticles exhibited highest percentage of hatching in both direct addition (78.0 ± 3.1% and 78.05 ± 4.2%, respectively) and coating onto tanks (58.6 ± 2.1% and 61.2 ± 2.7%, respectively) at 1 mg mL^?1 while least percentage of hatching was recorded in Ag‐TiO₂ nanoparticles irrespective of its concentration & mode of supplementation. Highest survival of L. rohita fry (50.13 ± 2.2%) was observed after 15 days post hatching in CuO coated tanks followed by ZnO coated tanks (38.6 ± 2.8%) while least was recorded in Ag‐TiO₂ coated tanks (22.53 ± 3.0%). However in control tanks coated with Poly‐Urethane base with hardener and uncoated control tanks, the survival was 42.4 ± 1.2% and 41.36 ± 1.8% respectively. Further, significantly lower microbial load of water was recorded in CuO nanoparticles coated tanks (1.5 × 10¹⁰ CFU L^?1) as compared to uncoated control tanks (1.1 × 10¹⁶ CFU L^?1) without affecting water quality parameters. On the other hand, in Ag‐TiO₂ coated tanks, significantly lower microbial load (1.0 × 10⁶ CFU L^?1) as compared to uncoated control tanks at 15 days post hatching was recorded. However, Ag‐TiO₂ was toxic to L. rohita larvae & fry both in direct application and coating onto tanks. Considering the beneficial effects of CuO nanoparticle application, it has the scope of being used in a more eco‐friendly way in hatchery operations.     

Comparative analysis of mechanical properties of size film. II. Effect of blend composition and lubricants

The advent of very high speed shuttleless looms has increased the importance of sizing. Starch has been the most popular and economic size material. Synthetic binders are also being blended with starch to improve weaving loom efficiency. Blending may lead to give different properties, which can be suited for particular application. In the present study effect of blend composition in modified starch and synthetic size blends have been evaluated and mechanical properties like cohesion power, adhesion power, abrasion resistance, bending rigidity etc were studied. In general, it is being observed that paste characteristics and film properties of polyester resin blends are better but because of economic reasons PVA and acrylic polymers are preferred. In this study the effect of lubricant is also observed. It is analyzed that lubricant improves the various mechanical properties and hence the weaving performance of the material.