Accumulation of cadmium by flax and linseed cultivars in field-simulated conditions: A potential for phytoremediation of Cd-contaminated soils

The possibility of use of two technological types of Linum usitatissimum L., namely flax (grown for fibre) and linseed (grown for seed), for phytoextraction of cadmium (Cd) from Cd-contaminated soil was studied. A four-year field-simulated experiment was carried out with 6 flax and 4 linseed cultivars in order to study organ accumulation of Cd by flax and linseed plants at artificial concentration range 10-1000 mg Cd kg⁻¹ soil. The most Cd was accumulated by roots, followed by shoots, while reproductive parts (capsules and seeds) played comparably smaller role. The increasing soil Cd concentration resulted in increasing Cd accumulation by roots, while transport to above-ground plant parts was progresivelly inhibited. Even high soil Cd concentrations (1000 mg Cd kg⁻¹ soil) had not dramatic negative effect on plant growth and development. Cultivar differences as well as the differences between both technological Linum types have been found in Cd accumulation (flax being better Cd accumulator than linseed). Nevertheless, the recorded variation between technological types and within cultivars is in multiples of Cd values (units of mg Cd kg⁻¹ DW), not in orders of magnitude as needed for practical phytoextraction. A significant year-to-year effect on plant growth/development resulting in high variation in Cd accumulation was observed. Flax cv. Jitka exhibited good transport of Cd from roots to above-ground parts, while flax cv. Merkur showed high retention of Cd in roots. Further, the contrasting cultivars in total Cd accumulation (high accumulating flax cv. Jitka versus low accumulating linseed cv. Jupiter) were selected for future experiments. The uptake of Cd by flax/ linseed from ha per season was calculated and the strategy for flax/linseed growing on heavy metal polluted soils with subsequent utilization of heavy metal-contaminated biomass is discussed.     

Species proportions by area in mixtures of Scots pine (<Emphasis Type="Italic">Pinus sylvestris</Emphasis> L.) and European beech (<Emphasis Type="Italic">Fagus sylvatica</Emphasis> L.)

Scots pine (Pinus sylvestris L.) and European beech (Fagus sylvatica L.) dominate many of the European forest stands. Also, mixtures of European beech and Scots pine more or less occur over all European countries, but have been scarcely investigated. The area occupied by each species is of high relevance, especially for growth evaluation and comparison of different species in mixed and monospecific stands. Thus, we studied different methods to describe species proportions and their definition as proportion by area. 25 triplets consisting of mixed and monospecific stands were established across Europe ranging from Lithuania to Spain in northern to southern direction and from Bulgaria to Belgium in eastern to western direction. On stand level, the conclusive method for estimating the species proportion as a fraction of the stand area relates the observed density (tree number or basal area) to its potential. This stand-level estimation makes use of the potential from comparable neighboring monospecific stands or from maximum density lines derived from other data, e.g. forest inventories or permanent observations plots. At tree level, the fraction of the stand area occupied by a species can be derived from the proportions of their crown projection area or of their leaf area. The estimates of the potentials obtained from neighboring monospecific stands, especially in older stands, were poorer than those from the maximum density line depending on the Martonne aridity index. Therefore, the stand-level method in combination with the Martonne aridity index for potential densities can be highly recommended. The species’ proportions estimated with this method are best approximated by the proportions of the species’ leaf areas. In forest practice, the most commonly applied method is an ocular estimation of the proportions by crown projection area. Even though the proportions of pine were calculated here by measuring crown projection areas in the field, we found this method to underestimate the proportion by 25% compared to the stand-level approach.     

The growth and volatile oil yield of summer savory (iSatureja hortensis) in a cool wet environment

Stands of the annual culinary herb summer savory (Satureja hortensis L) were grown over four contrasting seasons, 1984-87, at Auchincruive in southwest Scotland. All crops matured in mid- to late August, yielding volatile oils of high quality. Total dry-matter yields per hectare were similar to those reported from eastern Europe, but oil yields were lower because of the genotype used, and there was considerable variation in dry-matter and oil yields between seasons. Variation in crop management (planting date, fertilization) affected oil yield only through changes in crop dry-matter production. Methods of increasing dry-matter and oil yields, and the potential of summer savory as an alternative crop for cool wet regions, are discussed.     

Persistence of a biocontrol Pseudomonas inoculant as high populations of culturable and non-culturable cells in 200-cm-deep soil profiles

Little is known about the ecology of soil inoculants used for pathogen biocontrol, biofertilization and bioremediation under field conditions. We investigated the persistence and the physiological states of soil-inoculated Pseudomonas protegens (previously Pseudomonas fluorescens) CHA0 (10⁸ CFU g^?1 surface soil) in different soil microbial habitats in a planted ley (Medicago sativa L.) and an uncovered field plot. At 72 days, colony counts of the inoculant were low in surface soil (uncovered plot) and earthworm guts (ley plot), whereas soil above the plow pan (uncovered plot), and the rhizosphere and worm burrows present until 1.2 m depth (ley plot) were survival hot spots (10⁵–10⁶ CFU g^?1 soil). Interestingly, strain CHA0 was also detected in the subsoil of both plots, at 10²–10⁵ CFU g^?1 soil between 1.8 and 2 m depth. However, non-cultured CHA0 cells were also evidenced based on immunofluorescence microscopy. Kogure's direct viable counts of nutrient-responsive cells showed that many more CHA0 cells were in a viable but non-culturable (VBNC) or a non-responsive (dormant) state than in a culturable state, and the proportion of cells in those non-cultured states depended on soil microbial habitat. At the most, cells in a VBNC state amounted to 34% (above the plow pan) and those in a dormant state to 89% (in bulk soil between 0.6 and 2 m) of all CHA0 cells. The results indicate that field-released Pseudomonas inoculants may persist at high cell numbers, even in deeper soil layers, and display a combination of different physiological states whose prevalence fluctuates according to soil microbial habitats.     

Biochemical responses and oxidative stress in Francisella tularensis infection: a European brown hare model

Background

The aim of the present study was to investigate biochemical and oxidative stress responses to experimental F. tularensis infection in European brown hares, an important source of human tularemia infections.

Methods

For these purposes we compared the development of an array of biochemical parameters measured in blood plasma using standard procedures of dry chemistry as well as electrochemical devices following a subcutaneous infection with a wild Francisella tularensis subsp. holarctica strain (a single dose of 2.6 × 10⁹ CFU pro toto).

Results

Subcutaneous inoculation of a single dose with 2.6 × 10⁹ colony forming units of a wild F. tularensis strain pro toto resulted in the death of two out of five hares. Plasma chemistry profiles were examined on days 2 to 35 post-infection. When compared to controls, the total protein, urea, lactate dehydrogenase, aspartate aminotransferase and alanine aminotransferase were increased, while albumin, glucose and amylase were decreased. Both uric and ascorbic acids and glutathione dropped on day 2 and then increased significantly on days 6 to 12 and 6 to 14 post-inoculation, respectively. There was a two-fold increase in lipid peroxidation on days 4 to 8 post-inoculation.

Conclusions

Contrary to all expectations, the present study demonstrates that the European brown hare shows relatively low susceptibility to tularemia. Therefore, the circumstances of tularemia in hares under natural conditions should be further studied.     

The presence of methicillin-resistant Staphylococcus aureus on large pig breeding farms in Croatia

Methicillin-resistant Staphylococcus aureus (MRSA) have emerged worldwide and have become resistant to a variety of antibiotics. MRSA colonisation in pigs was first reported from the Netherlands in 2005, where pigs were implicated as a source of human MRSA infections (Voss et al., 2005). This paper presents the first report on the presence of MRSA on large pig breeding farms in Croatia, together with the determination of the mecA gene, the results of spa typing and susceptibility to commonly used antimicrobials. Dust samples (7-11 per farm) were collected from eight large pig farms in Croatia. Of the total 68 swabs, the mecA gene was detected in 24 isolates growing on the MRSA agar. All isolates were resistant to oxacillin, tetracycline and streptomycin, and susceptible only to vancomycin, while 92% of the strains were susceptible to ciprofloxacin. Genotyping of the MRSA strains was performed by spa typing, and revealed t011 (n = 17), t034 (n = 5) and t1451 (n = 2). The results presented here predict that MRSA is present on a large number of pig farms in Croatia.     

Detection of bovine leukemia virus antibodies using the cytotoxicity test in comparison with other serologic methods

In ninety-five serum samples taken in a herd of five-year to seven-year cattle that was heavily infected by bovine leukosis virus, the four serological assays were used for demonstration of the antibodies to bovine leukosis virus; cytotoxic test, immunodiffusion test in agar-agar, immunoenzymatic test and serum neutralizing test. The serum neutralizing test was found to be the most sensitive: further seven positive reagents were diagnosed in comparison with immunoenzymatic test; cytotoxic and immunodiffusion tests in agar-agar have the lowest sensitivity and the results of these tests are almost identical. It was found out in forty titrated samples that serum neutralizing test was by as much as 20 times more sensitive than immunoenzymatic test, the latter being about 50 times more sensitive than cytotoxic and immunodiffusion tests.     

The KDE+ software: a tool for effective identification and ranking of animal-vehicle collision hotspots along networks

Context

Objective identification of locations on transportation networks, where animal-vehicle collisions (AVC) occur more frequently than expected (hotspots), is an important step for the effective application of mitigation measures.

Objectives

We introduce the KDE+ software which is a programmed version of the KDE+ method for effective identification of traffic accident hotspots. The software can be used in order to analyze animal-vehicle collision data.

Methods

The KDE+ method is based on principles of Kernel Density Estimation (KDE). The symbol ‘+’ indicates that the method allows for the objective selection of significant clusters and for the ranking of the hotspots. It is also simultaneously applicable to an unlimited number of road segments.

Results

We applied the KDE+ method to the entire Czech road network. The hotspots were ranked according to their significance. The resulting hotspots represent a short overall road length which should require a more detailed assessment in the field. The 100 most important clusters of AVC represent, for example, only 19.7 km of the entire road network (37,469 km).

Conclusions

We present an objective method for hotspots identification which can be used for AVC data. This method is unique because it determines the significance level of hotspots in an objective way. The prioritization of hotspots allows a transportation manager to effectively allocate resources to a feasible number of identified hotspots. We describe the software, data preparation and present the KDE+ application to AVC data.