滇中地区森林火险等级预报方法的研究

经引起滇中地区森林火灾的主要细小可燃物的含水率及初始蔓延速度的大量试验数据为基础，结合大量林火历史资料，气象历史资料统计分析，找出规律，在对森林火险等级进行实测的基础上，建立数学模型和预报方法。经验证及对预报效果分析证明，本预报方法符合客观实际，是一种符合科学规律、简易、实用的预报方法，同时对引起滇中地区特大森林火灾的大气环流形势及物理量的变化作了分析，掌握了有关规律，为该地区的特大森林火险预报提     

澳大利亚维多利亚州公有林管理

维多利亚州是澳大利亚重要的林业省份之一,在其2000多万hm2白土地上,公有土地为910万hm2,森林覆盖率高达80%.公有林业作为公共事业的一个重要组成部分,其管理体制经历了不断改革和发展的过程,特别是1986年以后,随着维州政府《木材工业战略》的颁布和实施,维州的公有林管理进入了一个新的时期。介绍了维州公有林业的主管机构及其职能、天然林资源管理及规划、公有人工林管理及改革,探讨了其林业发展政策及存在的问题。     

Population status and regeneration of a tropical clumping bamboo <Emphasis Type="Italic">Schizostachyum dullooa</Emphasis> under two management regimes

Schizostachyum dullooa (Gamble) Majumder ‘dolu bamboo’ is a thin walled sympodial moderate sized to large tufted bamboo, dominant in the successional fallows of northeast India. The impact of resource management on productivity and sustainability of the species was evaluated by investigating the population status and regeneration in Cachar tropical semi evergreen forest under private property resource management (PPRM) and common property resource management (CPRM) regimes. Population status revealed current-year, one-year, two-year and three-year-old culms contribute 54%, 24%, 16% and 6% of the total culms per clump, respectively, under PPRM. Three-year-old culms were absent in CPRM and population status was thus represented by current year (83%), one-year (16%) and two-year (1%) old culms. Net change, rate of change and % gain in population for different age classes showed the prevalence of management practices under CPRM was unscientific. Efficiency of new culm production per clump used as an index of regeneration was 69.7% in PPRM and 59.88% in CPRM. New culms produced under CPRM were small and thin. We conclude that CPRM is inappropriate for a long term economic and ecological sustainability of the species and alternative management protocols are needed for conservation of the species.     

Durability characteristics of cement-bonded particleboards manufactured from maize stalk residue

Cement-bonded particleboards of 6 mm in thickness were manufactured using maize stalk (Zea mays) particles of uniform sizes at three levels of board density and additive concentrations respectively. The bending strength and dimensional properties were assessed. Increase in board density and additive concentration caused increase in Modulus of rupture (MOR), Modulus of elasticity (MOE), and decrease in Thickness swelling (TS) and Water absorption (WA). The MOR, MOE and TS of the boards were significantly affected by board density except for WA, but additive concentration affected all the boards’ properties examined at p ≥ 0.05. Strong and dimensional stable cement-bonded boards could be manufactured from maize stalk particles with Portland cement as the binder after hot water treatment. Although the dimensional stability and mechanical strength properties of the boards were affected by the board density and additive concentration, the study revealed that cement-bonded particleboards could be manufactured from maize stalk (Zea mays) particles. However, the increase in board density and additive concentration could cause the increase in MOR and MOE, and cause the decrease in TS and WA of boards.     

Culling phenotypically inferior trees in seed production area enhances seed and seedling quality of <Emphasis Type="Italic">Acacia auriculiformis</Emphasis>

Improvement in seed and seedling quality of Acacia auriculiformis after culling phenotypically inferior trees was studied in a 6-year old seed production area (SPA). A 5-ha plantation was identified, of which 2.3 ha was converted into SPA. The initial stocking, 1 612 trees·ha⁻¹, was thinned down to 982 trees·ha⁻¹ based on growth characteristics. The following fruiting season, seeds were collected from 10 randomly selected trees in culled and non-culled stands, and seed physical characters, germination and seedling traits were assessed. Seed weight, seed thickness and percentage germination increased by 32.1%, 4.43% and 22.37%, respectively in the culled stand compared to the non-culled stand. Culling also increased the speed of germination, seedling dry weight and seedling vigor index. Heritability values were high for seed weight (0.974) and seed thickness (0.948) while medium values were observed for percentage germination (0.577) and total dry weight (0.534). Predicted genetic gain was 11.13% and 11.22% for seed weight and percentage germination, respectively. The actual gain was 32.1, 51.9 and 22.9% for seed weight, percentage germination and total dry matter, respectively. In conclusion, SPAs established by culling inferior trees could serve as sources of good quality seeds for reforestation programs until genetically improved seeds are made available.     

Variability and divergence in <Emphasis Type="Italic">Pongamia pinnata</Emphasis> for further use in tree improvement

A total of 24 candidate plus trees (CPTs) of Pongamia pinnata (L.) Pierre. were selected to elucidate their variation and diversity based on thirteen quantitative traits (4 pod traits, 6 seed traits of parent trees and 3 progeny traits) at Forest Research Centre, Institute of Forest Productivity — Mandar, Ranchi district during 2005–2007. The results show that, CPT-19 had maximum for seven traits viz, pod length (65.6 mm), 100-pod weight (542.4 g), seed 2D (two dimension) area (351.2 mm²), seed length (27.9 mm), seed breadth (17.4 mm), 100-seed weight (217.9 g) and plant height (164.3 cm). The traits, 100-pod weight and 100-seed weight had a high heritability (98.4%, 96.9%) accompanied with high genetic advance (46.0%, 34.9%). There is a positive significant correlation between 100-pod weight and 100-seed weight traits at both genotypic and phenotypic levels with plant height, collar diameter and volume index at 30 MAS (months after sowing). Volume index expressed a moderate heritability (47.4%) accompanied with high genetic advance (48.4%), indicating that the character is governed by additive gene effects. In divergence study, 24 accessions were grouped into 6 clusters on the basis of non-hierarchical euclidian cluster analysis. The genotypes in cluster IV (CPT-5, CPT-6, CPT-7, CPT-12, CPT-16, CPT-18, CPT-22) and cluster III (CPT-4, CPT-8, CPT-9, CPT-20, CPT-21) were most heterogeneous and can be best used within group hybridization. The wide diversity exists between the cluster V and II, followed by cluster II and I and crosses between CPTs of these clusters may result in substantial segregates. It is revealed that the existence of substantial variation and diversity can be utilized for genetic resource conservation and further tree improvement programmers of the species.     

Study on the effect of nano-silver impregnation on mechanical properties of heat-treated <Emphasis Type="Italic">Populus nigra</Emphasis>

The present study is aimed at investigating the effect of heat treatment of nano-silver-impregnated Populus nigra on weight loss, modulus of rupture (MOR), modulus of elasticity (MOE), and compression parallel to grain. Specimens were impregnated with 200 PPM water-based solution of nano-silver particles at 2.5 bar in a pressure vessel. For heat treatment, both nano-silver-impregnated and simple specimens were kept for 24 h at 45°C and then further for 24 h at 145°C and finally for 4 h at 185°C. MOR decreased from 529 to 461 kg/cm² in heat-treated specimens; MOE and compression parallel to grain were though improved. Also, comparison between heat-treated and nano-silver-impregnated heat-treated specimens showed that there was a decrease in MOR and MOE in nano-silver-impregnated heat-treated specimens. This shows that nano-silver impregnation facilitates transfer of heat in wood and it may increase the process of degradation and pyrolysis of wood structures in deeper parts of specimens.     

Improved bondability of wax-treated wood following plasma treatment

In this study, the impact of a plasma treatment using dielectric barrier discharge at atmospheric pressure on wax-treated beech was investigated by surface energy determination and adhesion tests. Measurements of the surface energy revealed a strong increase in surface polarity along with increased surface energy as a result of the plasma treatment, pointing to increased adhesion properties. To evaluate the adhesion properties of a polyvinyl acetate (PVAc) adhesive on beech treated with montan ester wax and synthetic Fischer–Tropsch wax, a special peel test was applied. This peel test provided evidence of increased adhesion of the PVAc after plasma treatment of both materials investigated.     

Do multipurpose companion trees affect high value timber trees in a silvopastoral plantation system?

Establishment of native timber trees on deforested land may contribute to the livelihood of farmers, to improved ecosystem services and to increased greenhouse gas uptake. Here, we present a new silvopastoral planting design to assess species performance and interspecific competition or facilitation effects among native timber and multipurpose trees in Central America. Two timber species, Tabebuia rosea and Cedrela odorata, were established in three low-density planting regimes allowing combined tree and future livestock production: (1) solitary planting, (2) companion planting with Guazuma ulmifolia, and (3) companion planting with the nitrogen-fixing Gliricidia sepium. We quantified survival, growth and reforestation potential of the two timber species subjected to the different planting regimes for the first 2 years after establishment. Nitrogen concentration as well as stable nitrogen and carbon isotope composition (δ¹⁵N, δ¹³C) of leaves of the timber saplings were determined. T. rosea showed higher survival and better growth than C. odorata under varying environmental conditions (soil, concomitant vegetation). Performance of the timber saplings was unaffected by either companion species. Planting regimes had no effect on foliar nitrogen concentration and δ¹⁵N of the two timber species, although δ¹⁵N values indicated nitrogen fixation activity in G. sepium trees. Planting regimes affected foliar δ¹³C values in T. rosea. δ¹³C values were significantly higher in solitarily growing individuals, suggesting lower exposition to water stress conditions in saplings surrounded by companion species. As we found positively correlated growth traits among timber and multipurpose trees, a combined planting may benefit farmers by providing additional goods and services.     

Importance of rubberwood in wood export of Malaysia and Thailand

We examined the contribution of rubberwood to the timber export markets of Malaysia and Thailand. In Malaysia, rubberwood has grown from 26% of total exported wood products in 1998 to 35% in 2007. A high proportion of furniture products (80%) is rubberwood, whereas the contribution of rubberwood to other wooden products is less than 20%. Only 10% of sawn timber and logs is rubberwood. In Thailand, rubberwood contributes to around 60% of total exported wood products, arising from a high share of not only furniture products (70%) but also other wood products (around 50%) and sawn timber and logs, which have increased in share from 40% in 1998 to 79% in 2007. We conclude that the high proportion of rubberwood products in the wood export markets of these two countries is a result of: (1) scarcity of raw wood materials because of strict controls on the logging of natural forests; and (2) governmental support to rubberwood production, including financial support to rubber planters and technical assistance to downstream timber processors.