Combined effects of salinity and potassium concentration on juvenile mulloway (Argyrosomus japonicus, Temminck and Schlegel) in inland saline groundwater

This paper reports on experiments conducted to examine the combined effects of salinity and potassium concentration on survival and growth of juvenile mulloway (Argyrosomus japonicus, Temminck and Schlegel) in inland saline groundwater. Three separate experiments were conducted in 20 (±1)°C water. In the first experiment, mulloway were held in 60 L aquaria (triplicate) with salinities of 5, 15, 25 or 35 g L^?1 and potassium concentrations of 20%, 40%, 60% or 80% of the concentration present in oceanic water of the equivalent salinity in a 4 × 4 factorial combination for 7 days. Response surface contour diagrams were generated from survival data to estimate optimal conditions. The results showed that maximum survival of juvenile mulloway occurred at salinities of >14 g L^?1 and potassium concentrations of >38%. Survival was lowest at salinities of <7 and >33 g L^?1 and potassium concentrations of <25%. The second experiment was conducted with mulloway held in 60 L aquaria at salinities of 15, 25 or 35 g L^?1 and potassium concentrations of 40%, 60%, 80% or 100% in a 3 × 4 factorial combination for 44 days. Optimal conditions for maximum survival and growth of mulloway were within a salinity range of 15–35 g L^?1 and potassium concentration above 40%. The third experiment was conducted in three 500 L tanks to record the survival and growth of mulloway fingerlings held at 20 (±1)°C, 23 g L^?1 salinity and potassium concentrations of 50% for 8 months. Survival and growth of mulloway fingerling in inland saline groundwater were similar to those reported from a semi‐intensive floating tank system in inland saline water and sea cage trials in oceanic water.     

Assessment of some soil properties by spatial variability in saline and sodic soils in Arsanjan plain, Southern Iran

Spatial patterns for several soil parameters such soil texture, Exchangeable Sodium Percentage (ESP), Electrical Conductivity (ECe), soil pH, Cation Exchange Capacity (CEC) were examined in saline and sodic soils in Arsanjan plain, Southern Iran, in order to identify their spatial distribution for implementation of a site-specific management. Soil samples were collected from 0-30, 30-60 and 60-90 cm soil depths at 85 sampling sites. Data were analyzed both statistically and geostatistically on the basis of the semivariogram. The spatial distribution model and spatial dependence level varied between soil parameters. Soil pH and ESP had the minimum and maximum variability at all depths, respectively. Soil properties indicated moderate to strong spatial dependence. ECe exhibited moderate spatial dependence at three depths; pH and ESP had a moderate spatial dependence at 0-30 cm and strong spatial dependence at 30-60 and 60-90 cm depths. Clay and CEC exhibited strong spatial dependence for the 0-30 cm and weak spatial dependence at 30-60 and 60-90 cm depths. Sand and silt had a non-spatial dependence at 0-30 cm and weak spatial dependency at 30-60 and 60-90 cm depths. The spatial variability in small distances of ECe, CEC, pH and ESP generally increased with depth. All geostatistical range values were greater than 1168 m. The results reported herein indicated that the strong spatial dependency of soil properties would lead to the extrinsic factors such as ground water level and drainage. It is important to know the spatial dependence of soil parameters, as management parameters with strong spatial dependence will be more readily managed and an accurate site-specific scheme for precision farming more easily developed.     

Hygroscopic thickness swelling rate of composites from sawdust and recycled plastics

The thickness swelling rates of compression molded wood plastic composites (WPCs) prepared from 50% by weight sawdust and 50% by weight virgin and/or recycled plastics (HDPE and PP) were studied. Thickness swelling rates of the manufactured WPCs were evaluated by immersing them in water at room temperature and monitoring thickness changes for several weeks. A swelling model developed by Shi and Gardner (Composites Part A, 37:1276–1285, 2006) was used to study the thickness swelling process of WPCs. The parameter K _SR of the model can be used to quantify the swelling rate. The results indicated that composites containing PP had lower equilibrium thickness swelling and also shorter equilibrium time (time to reach equilibrium thickness swelling). The swelling model developed was a good predictor of the hygroscopic swelling process of wood plastic composites. Composites containing PP (virgin and recycled) had higher K _SR than those containing HDPE. The minimum and maximum K _SR values were observed in composites made of virgin HDPE and a mixture of recycled plastics, respectively. With increasing recycled plastic content K _SR linearly decreased.     

Drought effects on hydraulic conductivity and xylem vulnerability to embolism in diverse species and provenances of Mediterranean cedars

We studied hydraulic traits of young plants of the Mediterranean cedar species Cedrus atlantica (Endl.) G. Manetti ex Carrière (Luberon, France), C. brevifolia (Hook. f.) Henry (Cyprus), C. libani A. Rich (Hadeth El Jebbe, Lebanon) and C. libani (Armut Alani, Turkey). With an optimum water supply, no major differences were observed among species or provenances in either stem hydraulic conductivity (Ks) or leaf specific conductivity (Kl) measured on the main shoot. A moderate soil drought applied for 10 weeks induced marked acclimation through a reduction in Ks, particularly in the Lebanese provenance of C. libani, and a decrease in tracheid lumen size in all species. Cedrus atlantica, which had the smallest tracheids, was the species most vulnerable to embolism: a 50% loss in hydraulic conductivity (PsiPLC50) occurred at a water potential of -4.4 MPa in the well-watered treatment, and at -6.0 MPa in the moderate drought treatment. In the other species, PsiPLC50 was unaffected by moderate soil drought, and only declined sharply at water potentials between -6.4 and -7.5 MPa in both irrigation treatments. During severe drought, Ks of twigs and stomatal conductance (g(s)) were measured simultaneously as leaf water potential declined. For all species, lower vulnerability to embolism based on loss of Ks was recorded on current-year twigs. The threshold for stomatal closure (10% of maximum g(s)) was reached at a predawn water potential (Psi(pd)) of -2.5 MPa in C. atlantica (Luberon) and at -3.1 MPa in C. libani (Lebanon), whereas the other provenance and species had intermediate Psi(pd) values. Cedrus brevifolia, with a Psi(pd) (-3.0 MPa) close to that of C. libani (Lebanon), had the highest stomatal conductance of the study species. The importance of a margin of safety between water potential causing stomatal closure and that causing xylem embolism induction is discussed.     

Bending moment resistance of corner joints constructed with spline under diagonal tension and compression

We determined the effects of the penetration depth and spline material and composite material type as well as joining method on bending moment resistance under diagonal compression and tension in common wood panel structures. Composite materials were laminated medium density fiberboard (MDF) and particle board. Joining methods were buttand miter types. Spline materials were high density fiber board (HDF).The penetration depths of plywood, wood (Carpinus betolus) and splinewere 8, 11 and 14 mm. The results showed that in both diagonal compression and tension, MDF joints are stronger than particle board joints,and the bending moment resistance under compression is higher compared with that in tension. The highest bending moment resistance under tension was shown in MDF, butt joined using plywood spline with 8 mm penetration depth, whereas under compression bending moment resistance was seen in MDF, miter joined with the HDF spline of 14 mm penetration depth.     

A feasibility study of using two-component polyurethane adhesive in constructing wooden structures

This investigation was conducted to determine the feasibility of using a two-component polyurethane （PUR） adhesive, with special waterproof properties, in constructing wooden structures. We designed and conducted tests to compare the shear strength and adhesion performance of PUR with polyvinyl acetate （PVAc） adhesive on block-shear specimens constructed of oriental beech （Fagus orientalis L.）, fir （Abies alba Mill.）, poplar （Populus deltoides Bartr.）, white oak （Quercus alba L.）, sycamore （Platanus orientalis L.） and white walnut （Juglans cinerea L.）. The values of the percentage of wood failure were also determined in specimens constructed with each adhesive. The highest shear strength values of both adhesives were obtained in specimens constructed of beech, while the lowest shear strength values were obtained in fir and poplar specimens. Average shear strength of the PUR adhesive was 16.5% higher than that of the PVAc adhesive. Specimens constructed of fir, poplar and sycamore were characterised by the highest percentages of wood failure, whereas the lowest average percentages of wood failure were obtained in beech and oak specimens. With the exception of oak specimens, there was no statistically significant difference between percentage of wood failure among the PUR and PVAc adhesives. Generally, the PUR adhesive showed an acceptable adhesion performance on wood materials used in our study.     

In vitro antifungal activities of Allium cepa, Allium sativum and ketoconazole against some pathogenic yeasts and dermatophytes

By using an agar dilution assay, the antifungal activity of aqueous extracts prepared from Allium cepa (onion; AOE) and Allium sativum (garlic; AGE) were evaluated against Malassezia furfur (25 strains), Candida albicans (18 strains), other Candida sp. (12 strains) as well as 35 strains of various dermatophyte species and compared with the activity of a known antifungal drug, ketoconazole (KTZ). All the AOE, AGE and KTZ were found to be able to inhibit growth of all fungi tested in a dose-dependent manner with maximum of 100% at defined concentrations. The results indicate that onion and garlic might be promising in treatment of fungal-associated diseases from important pathogenic genera Candida, Malassezia and the dermatophytes.     

Applications of polysaccharides (β-glucan) for physiological and biochemical parameters for evaluation rice tolerance under salinity stress at seedling stage

Salt stress is considered to be the most important abiotic stress and is the main problem in the interruption of the metabolic processes of plants, thereby limiting crop production. The present study was carried out to examine the effects of exogenously applied mushroom polysaccharides (β-glucan) on the growth of two rice varieties of Oryza sativa L. (MRQ74 and MR269) seedlings grown in vitro in 200 Mm sodium chloride (NaCl). Growth characteristics, including shoot and root height, and fresh and dry weight of salt-stressed rice seedlings were inhibited by sodium chloride treatment, the degree of which depends on the rice variety. The negative effects of salinity stress resulted in an imbalance of N, K⁺ Na⁺ and Na/K ratios and biochemical analysis activities a degradation of chlorophyll content in the plants. However, treatment with exogenously applied polysaccharides (β-glucan) ameliorated the stress generated by NaCl and improved the parameters mentioned above. The significance of the changes in growth and metabolism to salt stress tolerance in rice seedlings are discussed in the paper.     

Investigation the Efficiency of Soil Stabilizers against Soil Loss and their Effects on Chemical Properties of Soil

Soil erosion and dust storms are the main causes of air pollution in regions where there are dust emitting centers and in their adjacent locations. In recent years, various methods have been considered for stabilizing soil surface against wind erosion. In this study, the effects of two stabilizers (anionic polyacrylamide polymer and vegetable-based mulch) for reducing soil loss at four levels of concentration (0, 15%, 30%, and 60%) on three kinds of soils in western Khuzestan, Iran have been studied. The study was conducted in natural and laboratory-based conditions in four, time intervals (0, 3, 6, and 12 months). Moreover, the study covered the persistence and influence of stabilizers on soil chemical properties. The results showed that wind erosion in no treatment was between of 16.36?kg/m²/hand 26.73?kg/m²/^?h. The statistical results showed that there was a significant difference between the no treatment and soils treated with stabilizers. The polymer reduced soil loss by more than 90%. Mulch efficiency reduced in natural conditions after 6?months; however, there were no changes in laboratory conditions. There was no significant difference between polymer efficiency in the laboratory and natural conditions and the polymer was resistant in natural and laboratory conditions. Polymer increased EC, pH, and SAR in the soil after 1 year. Mulch decreased pH and SAR but did not change EC.     

Comparison of natural populations of Mycosphaerella graminicola from single fields in Kansas and California

Kansas and California wheat-growing regions differ dramatically in soils, climate, wheat cultivars, crop rotation patterns, and cultural practices, which could select for different fungal populations of Mycosphaerella graminicola. Our objective in this study was to use amplified fragment length polymorphism (AFLP) loci to assess the genetic diversity of M. graminicola populations within single fields in two widely separated, and geographically isolated sites in Kansas and California. Three primer-pair combinations were used to resolve polymorphism at 177 loci in 67 and 63 isolates from Kansas and California, respectively. Genotypic variability was high, which is consistent with a genetically diverse initial inoculum. There was no evidence of genetic disequilibrium in either population, with only 4.6% of the locus pairs in Kansas, and 5.4% of the locus pairs in California in detectable disequilibrium. The migration rate calculated between the two sites was as low as 1.8 individuals per generation, and significant differences in allele frequencies were observed. Therefore, these two populations do not represent mere subsamples of a larger, randomly mating population. This is a rare report of isolation by distance occurring between two North American populations of M. graminicola, indicating that at least some of these populations may be differentiating. Although genetic isolation by distance may occur, we cannot exclude movement of new gene combinations such as fungicide resistance or virulence between these two locations.