Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).     

Effects of light and microsite conditions on tree size of 6-year-old Cryptomeria japonica planted in a group selection opening

We examined the extent to which direct and indirect measures of light and microsite conditions could explain variation in tree height and diameter at the base of 6-year-old Cryptomeria japonica trees planted in a group selection opening of about 0.32 ha on a steep slope at Shiiba, Miyazaki Prefecture, southern Japan. We first used the gap light index (GLI) and soil thickness (ST) as directly measured indices. For an indirect measure of light, we used a between-cohort competition index (BCI) estimated from the position and total height of residual trees. For indirect measures of microsite, we examined topographic indices (slope, plan and profile curvature, average slope gradient, and relative elevation) derived from digital elevation models (DEMs) with different resolutions ranging from 2 to 10 m. The multiple linear regression using GLI and ST explained about 45% of variation in tree size, while simple regression using only GLI explained about 35%. The contribution of ST was about half of GLI. The multiple regressions using BCI and the topographic indices did not explain any more variation than using BCI alone (R ² of about 0.26). We conclude that microsite conditions with shallower soil and steeper slope have negative effects on tree growth in group selection openings, although the relative importance is smaller than light conditions. More comprehensive studies considering several openings with more heterogeneous topography including different species are needed to generalize our growth prediction using the indirect measures, which are useful for practical forest management.     

Comparisons of hyphal growth of Raffaelea quercivora among four Japanese Fagaceae species

Japanese oak wilt causes widespread oak mortality in Japan. Possible differences in susceptibility to the causal fungus, Raffaelea quercivora, may be due to vessel arrangements in host trees. To clarify whether constitutive defence mechanisms including vessel arrangements or induced defence mechanisms are the main determinants of host susceptibility, we inoculated the fungus into living seedlings or sterilized stem segments of four Japanese fagaceous species. In seedlings, water conductance was assessed with dye. In both seedlings and stem segments, hyphal growth was examined by fluorescence microscopy. In seedlings, the area of non‐conductive sapwood in stem cross sections and hyphal growth differed significantly among species. In the susceptible species Quercus crispula and Quercus serrata, hyphal growth was significantly and positively correlated with the proportion of non‐conductive sapwood. In stem segments, hyphal growth was not significantly different among species or between vessel arrangements and was similar to or greater than that in seedlings. These results suggest that the extent of sapwood colonization by R. quercivora could be used as a marker for susceptibility and that susceptibility is determined mainly by induced defence responses.     

杉木促进开花结实方法的探讨

试验通过对 １、２、３年生杉木苗施用赤霉素 １００ ｐｐｍ、细胞分裂素、北林激素 １０倍水稀释、北林激素２０倍水稀释等不同药品的处理,以及与对照的比较,发现以上药品对１年生杉木处理无效果,没有开花现象;对２、３年生杉木苗,北林激素２０倍水稀释后对提前雄花开花结实时间效果很明显。     

杉木采穗母树修剪方法的探讨

通过对不同年龄的杉木使用截干、斜埋、剪枝等几种不同修剪方法的试验,比较各种不同方法产生穗条的数量及生根情况,确定一种可行的采穗母树剪定方法,为杉木采穗圃的营建与管理提供技术保证。结果表明在使用幼龄苗营建杉木采穗圃时,采用斜埋法产生穗条的数量最多且生根情况最好;如果要从年龄稍大一点的树中获取大量穗条或是建立长期的采穗圃,采用截干法,效果较好。     

Examining the Optimal Method to Extract Logging Residues from Small-Scale Forestry in the Nasunogahara Area,Tochigi Prefecture,Japan

This study examines the optimal method to extract logging residues from small, fragmented and scattered forests separately from the mechanized operational systems used on aggregated forestry operation sites. First, small-scale logging systems operated by a private logging contractor and an individual forest owner were investigated. Regression equations for estimating felling and processing cycle times were established as a function of stem and log volumes, respectively. Equations to estimate the forwarding and transporting cycle times were established as a function of the forwarding and transporting distances using the forwarding and transporting velocities, respectively. Then, equations to estimate productivities and costs were established with the cycle times, volumes and hourly operational expenses consisting of labour and machinery expenses. Finally, costs of the small-scale systems—mini-forwarder and 4 t truck operated by a private logging contractor, and manual logging and light truck operated by an individual forest owner—were estimated and compared with the mechanized operation system operated by the Forest Owners’ Association. The mechanized operation system was found to have the highest cost and could not compete for small forestry operational sites and small stem volumes. The small-scale systems could be effective for harvesting small areas. This was especially true when conducting extracting operations without machines, as done by the individual forest owner, and transporting operations by a private logging contractor, in which the hourly income of the individual forest owner was higher than the hourly labour expenses.