Collapsing process simulations of timber structures under dynamic loading II: simplification and quantification of the calculating method

In a previous paper we presented the efficacy of the extended distinct element method (EDEM) on the collapsing process simulation of timber-frame structures. The results obtained were qualitative, and the need for quantitative simulation was pointed out. In this report, we improved our simulating programs with the aim of establishing a quantitative simulation by EDEM. For this purpose, the parameters of the frame members (beam or column) were determined by comparing the simulated results of four-point bending tests with experimental results. Other parameters of plywood and joint members were determined by simulations of two rail shear and slip tests of joint parts, respectively. Using these parameters we made simulations of the collapsing process of an actual-size plywood-sheathed wall and at the same time carried out the experiments under similar conditions. Simulated load–displacement curves of the plywood-sheathed wall were similar to those obtained in the experiments, and the sequence of failure at nailed joints of the simulation model gave good agreement with that of the experimental collapsing processes. Using these processes, we believe that we established a basic quantitative simulation method to test the collapsing process of timber-frame structures.Part of this paper was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002; and at the 7th World Conference of Timber Engineering, Malaysia, August 2002     

Eye fatigue-reduction effect of wood rim cover on liquid crystal display

The purpose of this study is to confirm objectively by an instrumental measurement if there is less eye fatigue in VDT work when using a wood rim covered display than when using a plastic housing display. The subjects were 26 graduate and undergraduate university students. Each subject did the same 60-min VDT activity with both a plastic housing and wood-covered display. Before and after VDT activity, each subject’s near-point accommodation distance was measured by a near-point ruler. As a result, it was confirmed that variation rate of the near-point accommodation distance by the VDT work with the wood-covered display was smaller than with the plastic housing display. From sensory tests, progression of subjective symptoms such as eye pain and headache was less with the wood-covered display than with the plastic housing display.     

Variability of fracture toughness by the crack tip position in an annual ring of coniferous wood

The effects of the location of the crack tip in an annual ring and the direction of crack propagation on the fracture toughness of the TR crack propagation system of coniferous wood (T, direction normal to the notch plane; R, propagation direction) were analyzed by the finite element method in regard of the changes in elastic modulus and strength within an annual ring. The critical point of the fracture was defined as the state where the stress of a square element (0.125 × 0.125 mm) in contact with the crack tip equals the tensile strength. The distribution of specific gravity was measured by soft X-ray densitometry. The elastic moduli in the T and R directions were estimated by the sound velocity. The tensile strengths in the T and R directions were measured by the tensile test using small specimens of l mm span length. Regarding the variability of fracture toughness (K _IC), the experimental and calculated results had the same tendency. Therefore, it was concluded that the variability ofK _IC is caused by the (1) heterogeneity of the elastic modulus and strength within an annual ring; and (2) changes in the degree of stress concentration at the crack tips, according to the direction of crack propagation.Part of this work was presented at the 40th annual meeting of the Japan Wood Research Society, Tsukuba, April 1990 and at the 6th International Conference on Mechanical Behavior of Materials, Kyoto, July 1991     

Seasonal variations in phytoplankton productivity in a shallow cove in the eastern Seto Inland Sea,Japan

Fisheries Science - We examined phytoplankton productivity in Shido Bay, an active oyster farming area in the eastern Seto Inland Sea, Japan, by an in situ 13C method from March 2016 to January...     

Vibrational properties of heat-treated green wood

To investigate the influence of water on heat treatment, green wood was heat-treated. Sitka spruce (Picea sitchensis Carr.) with about 60% moisture content (MC) was used. Young's modulus and loss tangent were measured by the free-free flexural vibration test. The specimens were heated in nitrogen at 160°C for 0.5h. The results were as follows. (1) Recognizing that the effects of heat treatment are mild and that the same specimens cannot be used for both heat treatment and as controls, it was necessary to investigate the effects of the heat treatment based on the variations of properties in the whole of the test lumber. (2) Young's modulus increased and the loss tangent decreased due to heat treatment. When the vibrational properties were measured at various MCs, the MCs at the maximum value of Young's modulus and the minimum value of the loss tangent were lower in heat-treated specimens than in controls. The effects of heat treatment in green wood were similar to those in air-dried wood. (3) The loss tangents of heat-treated specimens were smaller than those of controls at about 0% MC but were larger than those of controls at about 10% MC. We thought that this resulted from the decreased MC at the minimum loss tangent after the heat treatment mentioned above. (4) The properties measured at several MCs were more useful than those at only one moisture content for investigating the effects of heat treatment.This study was presented in part at the 46th annual meeting of the Japan Wood Research Society, Kumamoto, April 3–5, 1996; and at the 47th annual meeting of the Japan Wood Research Society, Kochi, April 3–5, 1997     

Measurement of mode II fracture toughness of wood by the end-notched flexure test

We examined the applicability of end-notched flexure (ENF) tests for measuring the mode II fracture toughness of wood. Western hemlock (Tsuga heterophylla Sarg.) was used for the specimens. The fracture toughness at the beginning of crack propagationG _IIc and that during crack propagationG _IIR were calculated from the loadloading point compliance and load-crack shear displacement (CSD) relations. The obtained results were compared with each other, and the validity of measurement methods were examined. The results are summarized as follows: (1) The value ofG _IIc increased with the increase in initial crack length. When measuringG _IIc by ENF tests, we should be aware of the dependence ofG _IIc on the initial crack length. (2) The value ofG _IIR initially increased with the crack length, and it reached a constant value. (3) Measurement of the CSD is recommended when obtainingG _IIR because the crack length, which has a great influence on theG _IIR calculation, is implicitly included in the CSD. (4) We found that the crack length during its propagation should be evaluated by the final crack length.     

A case of spontaneous Zymbal’s gland carcinoma with lung metastasis in an aged Fischer 344 rat

Zymbal’s gland neoplasms are induced in rats through the administration of various carcinogens, but spontaneous neoplasia is rare. This report describes a spontaneous Zymbal’s gland carcinoma with lung metastasis found in an aged male Fischer 344 rat. Macroscopically, the dome-like tumor nodule, approximately 30 mm in diameter with ulceration, was located near the ear canal of the rat. No healthy tissue or structure of Zymbal’s gland was identified on the corresponding side, while the normal salivary glands and a lacrimal gland were observed. Histologically, a large part of the tumor mass was occupied by poorly differentiated neoplastic cells, the shapes of which were oval to polygonal or fusiform. Additionally, clusters of sebaceous-like foamy cells and squamous metaplasia with prominent keratinization were observed. Tumor cells were found to metastasize to the lung; these cells displayed histological similarities, including a sebaceous gland-like pattern, to those in the primary site. The tumor cells were immunohistochemically positive for cytokeratin AE1/AE3 or vimentin but negative for CD68, S100, α-smooth muscle actin, von Willebrand factor, and desmin. Our results indicate that the tumor was a poorly differentiated Zymbal’s gland carcinoma with lung metastasis.     

Magnetic domain-wall racetrack memory

Recent developments in the controlled movement of domain walls in magnetic nanowires by short pulses of spin-polarized current give promise of a nonvolatile memory device with the high performance and reliability of conventional solid-state memory but at the low cost of conventional magnetic disk drive storage. The racetrack memory described in this review comprises an array of magnetic nanowires arranged horizontally or vertically on a silicon chip. Individual spintronic reading and writing nanodevices are used to modify or read a train of approximately 10 to 100 domain walls, which store a series of data bits in each nanowire. This racetrack memory is an example of the move toward innately three-dimensional microelectronic devices.     

Characteristics of various fibrolytic isozyme activities in the rumen microbial communities of Japanese Black and Holstein Friesian cattle under different conditions

Rumen microorganisms produce various fibrolytic enzymes and degrade lignocellulosic materials into nutrient sources for ruminants; therefore, the characterization of fibrolytic enzymes contributing to the polysaccharide degradation in the rumen microbiota is important for efficient animal production. This study characterized the fibrolytic isozyme activities of a rumen microbiota from four groups of housed cattle (1, breeding Japanese Black; 2, feedlot Japanese Black; 3, lactating Holstein Friesian; 4, dry Holstein Friesian). Rumen fluids in all cattle groups showed similar concentrations of total volatile fatty acids and reducing sugars, whereas acetic acid contents and pH were different among them. Predominant genera were commonly detected in all cattle, although the bacterial compositions were different among cattle groups. Zymograms of whole proteins in rumen fluids showed endoglucanase activities at 55 and 57 kDa and xylanase activity at 44 kDa in all cattle. Meanwhile, several fibrolytic isozyme activities differed among cattle groups and individuals. Treponema, Succinivibrio, Anaeroplasma, Succiniclasticum, Ruminococcus, and Butyrivibrio showed positive correlations with fibrolytic isozyme activities. Further, endoglucanase activity at 68 kDa was positively correlated with pH. This study suggests the characteristics of fibrolytic isozyme activities and their correlations with the rumen microbiota.     

Evaluation of end-check propagation based on mode I fracture toughness of sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>)

The relation between crack propagation based on fracture mechanics and end-check propagation during drying was evaluated in this study. Corresponding to the direction of end-check propagation, the mode I fracture toughness of air-dried sugi specimens in TR, TL, and intermediate systems was examined by single-edge-notched bending tests. The occurrence and propagation of end checks on sugi (Cryptomeria japonica D. Don) blocks during drying were observed at the scale of the annual rings. It was found that the critical stress intensity factor (K _IC) decreased as the crack propagation changed from TL to TR. The value of K _IC in the TR system was significantly lower than that in the TL system. As a measure of fracture energy, the area under the load-crack opening displacement curve in the TR system was more than twice that in the TL and intermediate systems. These results indicate that cracks perpendicular to the tangential direction initiate radially with ease, and then crack arrest occurs to prevent growing. This finding provides a consistent interpretation of the end-check propagation observed during drying as follows: tiny end checks, as an analog of TR cracks, occur easily and selectively in latewood or transition wood and propagate toward the pith during drying. When there is no corresponding secondary check in the forward latewood, the checks are arrested and do not propagate further.