Efficacy of a single intravenous dose of the neuraminidase inhibitor peramivir in the treatment of equine influenza

Equine influenza A virus (EIV) of the H3N8 subtype is an important pathogen causing acute respiratory disease in horses. Peramivir is a selective inhibitor of the influenza virus neuraminidase (NA). The characteristics of peramivir are not only its capacity for parenteral administration, but also its strong affinity for NA and slow off-rate from the NA-peramivir complex, suggesting that it could lead to a prolonged inhibitory effect and thus allow a lower dosing frequency. The aims of this study were to evaluate the inhibitory efficacy of peramivir against the NA activities of EIV in vitro and the treatment efficacy of a single intravenous dose of peramivir in horses experimentally infected with EIV. Peramivir inhibited the activities of NA from the seven contemporary EIV strains in vitro, with 50% inhibitory concentrations ranging from 0.10 to 0.20nmol/L. Horses treated with a single IV dose of peramivir (3000mg/600mL/animal, 7.8-9.3mg/kg of bodyweight) showed significantly milder clinical signs (pyrexia, nasal discharge and cough) with a shorter duration than control horses injected with normal saline. Moreover, the mean duration of virus shedding for the horses treated with peramivir was significantly shorter than for the control horses. These findings suggested that a single IV administration of peramivir had good potential for the treatment of equine influenza, and may help to limit the spread of the disease in the horse population.     

Molecular characterization of the equine herpesvirus 1 strains RacL11 and Kentucky D

The pathogenicities of RacL11 and Kentucky D strains of equine herpesvirus 1 in the hamster infection model are different from those of Ab4p and the Japanese isolates. Virus genome restriction fragment length polymorphism analysis and sequence comparison of an intergenic region, glycoproteins and tegument genes showed higher conservation but with some strain-specific differences. These results indicate that point nucleotide differences in RacL11 and Kentucky D might be responsible for their pathogenicity in rodent models.     

Morphological Study of the Surface Structure of the Omasal Laminae in Cattle, Sheep and Goats

The mucosal relief of the omasum in cattle, sheep and goats was examined by the naked eye, stereoscopic microscope and scanning electron microscope. The mucosal relief of the omasum showed wide variations both between and within these species. Omasal papillae on the laminae varied highly in shape, i. e. conical, rounded, claw-like, wart-like, finger-like etc. They decreased gradually in size from the oral to the aboral region of the omasal lamina. Ridge-like structures and linear arrangements of the papillae were also seen on the omasal laminae of cattle and sheep. Many grooves and folds were found on the lateral surface of the omasal papillae in adult cattle and on the inter-papillar surface of the laminae of all three species. The mucosal relief of the omasum in cattle seemed to be more well-developed than those of sheep and goats. Dietary effects on the omasal mucosa were also discussed.     

Effects on flowering and seed yield of dominant alleles at maturity loci E2 and E3 in a Japanese cultivar,Enrei

‘Enrei’ is the second leading variety of soybean (Glycine max (L.) Merr.) in Japan. Its cultivation area is mainly restricted to the Hokuriku region. In order to expand the adaptability of ‘Enrei’, we developed two near-isogenic lines (NILs) of ‘Enrei’ for the dominant alleles controlling late flowering at the maturity loci, E2 and E3, by backcrossing with marker-assisted selection. The resultant NILs and the original variety were evaluated for flowering, maturity, seed productivity and other agronomic traits in five different locations. Expectedly, NILs with E2 or E3 alleles flowered later than the original variety in most locations. These NILs produced comparatively larger plants in all locations. Seed yields were improved by E2 and E3 in the southern location or in late-sowing conditions, whereas the NIL for E2 exhibited almost the same or lower productivity in the northern locations due to higher degrees of lodging. Seed quality-related traits, such as 100-seed weight and protein content, were not significantly different between the original variety and its NILs. These results suggest that the modification of genotypes at maturity loci provides new varieties that are adaptive to environments of different latitudes while retaining almost the same seed quality as that of the original.     

Erythrocyte migration and gap formation in rabbit blood clots in vitro

Thrombolytic agents must be carried by the blood circulation to thrombi to exert their functions. Structural gaps exist between blood vessels and thrombi or in the area surrounding thrombi. Therefore, information about fundamental gap formation at thrombotic areas is critically important for thrombolytic therapy. We previously reported that t-PA accelerates the activities of bovine erythrocytes and hemoglobin (Hb) towards bovine plasminogen activation. Here, we examined gap generation by observing morphological changes during thrombolytic processes in rabbit blood clots deformation of erythrocytes from blood clots and Hb transfer from erythrocytes to serum in vitro. Rabbit venous blood samples (1 ml) were stored under sterile conditions in glass tubes at 37°C for 2, 24, 48 h, 1, and 2 weeks. We examined clot diameter, erythrocyte diameter and number as well as Hb volume in the serum, as well as histological changes in the clots. The diameter of blood clots did not change until 2 weeks after sampling. Erythrocyte diameter decreased within 48 h and at 2 weeks after sampling at the clot surface (p < 0.001) and interior (p < 0.001). The number of erythrocytes in the serum started to increase starting from 24 h after sampling (p < 0.01). Serum Hb volume also gradually increased from 24 h until 2 weeks after sampling (p < 0.01). The erythrocyte envelope became disrupted and cytoplasm started to flow through pores into the serum at 24 h. The results indicated that blood clots are reduced due to clot retraction, erythrocyte dissociation and cytoplasm leakage without a distinct fibrinolytic reaction. These results indicated that gaps start to form between 2 and 24 h after blood clotting.     

Effect of board density on bending properties and dimensional stabilities of MDF-reinforced corrugated particleboard

We investigated the bending properties of composite boards produced by reinforcing both sides of corrugated particleboard with medium-density fiberboard (MDF). Thickness swelling and linear expansion (LE) were measured to assess the dimensional stabilities of the composite board. Although the apparent density of the composite board was 0.48g/cm³, its strength was found to be equivalent to that of 18-type particleboard as described in JIS A 5908. The boards parallel/perpendicular anisotropy in strength was 0.9. The modulus of rupture (MOR) of the composite board increased with board density only up to a certain density, beyond which the MOR was constant. On the other hand, the thickness swelling of both corrugated particleboard and the composite board was smaller than that of flat-type particleboard, satisfying the JIS A 5908 standard of 12%. Linear expansion (soaking in water of ordinary temperature for 24h) of corrugated particleboard was 0.7%–0.9% in the parallel direction and 2.1%–3.1% in the perpendicular direction; hence, anisotropy in linear expansion existed in the corrugated particleboard. The linear expansion of the composite board was 0.6%–0.9% in the parallel direction and 1.8%–2.5% in the perpendicular direction. Although the LE of the composite board was lower than that of corrugated particleboard, it is necessary to improve the LE of composite board for practical use.     

Nickel-catalyzed carbonization of wood for coproduction of functional carbon and fluid fuels I: production of crystallized mesoporous carbon

Japanese larch wood loaded with nickel (1%–4%) alone or with nickel and calcium (0.25%–1.5%) was carbonized at 800°–900°C for 0–120min with a heating rate of 5°–20°C min⁻¹ in a helium flow of 5.8−46.4 ml STP cm⁻² min⁻¹ to examine the influence of these variables on the crystallization of carbon (the formation of T component) and the development of mesoporosity. From the obtained results, reaction conditions suitable for effective production of carbon with the dual functions of adequate electroconductivity and adsorption capacity in liquid phase were established, thereby explaining the factors that govern the process. It was also confirmed that mesopore having a diameter of about 4 nm was selectively produced at the cost of specific (BET) surface area in parallel with the formation of T component. This result provided good insight into how the simultaneous dual function could be realized.     

Chemical analysis of the product in acid-catalyzed solvolysis of cellulose using polyethylene glycol and ethylene carbonate

Degradation and decomposition of cellulose were studied in an acid-catalyzed solvolysis treatment of biomass using polyethylene glycol (PEG) and ethylene carbonate (EC). The solvolysis reaction was followed by a typical reaction system of wood liquefaction that uses sulfuric acid catalyst at 140° or 150°C at atmospheric pressure. The methods of fractionation and chemical analysis of the degraded cellulose in the solvolyzed product are discussed. The solvolyzed product was separated into several fractions, and they were hydrolyzed to release glucose and levulinic acid to determine the quantity of glucosides and levulinates in the solvolysis product. The data clearly showed that the solvolysis reaction had the same mechanism when using PEG or EC. Degradation of cellulose leads to the formation of glucosides, which then decompose, resulting in a levulinic acid structure, and producing a water-insoluble fraction. The conversion rates of both glucosides and levulinates strongly depend on the reaction conditions of the solvolysis. In particular, EC promotes faster conversion of the reactions. The method discussed here is a chemical analytical technique for characterization of the products of wood liquefaction.     

Dimensional stability and strength properties of particleboard produced by a closed-press system

The purpose of this study was to reveal the effects of various levels of mat-moisture content (m.m.c.) and the closed-press system for making single- or three-layer particleboard on the density profile, thickness swelling, specific moduli of elasticity (MOE) and rupture (MOR) and internal bond strength. Internal gas pressure was measured in an enclosed frame; and the larger the m.m.c., the higher the internal gas pressure became. When rising water vapor (steam) struck particles, it plasticized them and cured the adhesive, resulting in improved interparticle contact. The vertical density gradient in the three-layer board was larger than that in the single-layer board. As for thickness swelling by cold-water soaking, the single-layer boards were less affected than the three-layer boards and showed good dimensional stability with increased m.m.c. The open-system boards swelled more than the closed-system boards. The closed-system single-layer board made at high m.m.c. returned nearly to the prime thickness by air-drying after cold-water soaking. Specific MOE and MOR were larger at 15% or 10% m.m.c. than those at other m.m.c. Considerable reductions of specific MOR and MOE of the closed-system three-layer board were observed at 20% or 25% m.m.c.Part of this report was presented at the 45th annual meeting of the Japan Wood Research Society, Tokyo, April 1995 and at the 48th annual meeting of the Japan Wood Research Society, Shizuoka, April 1998