Migration of pine wood nematodes in the tissues of <Emphasis Type="Italic">Pinus thunbergii</Emphasis>

The distribution of pine wood nematodes (Bursaphelenchus xylophilus, PWNs) in Japanese black pine (Pinus thunbergii) tissues was investigated by staining with fluorescein isothiocyanate-conjugated wheat germ agglutinin. After PWNs were inoculated to current-year stems of pine seedlings, their distribution at about 5 cm below the inoculation site was confined only to cortical resin canals 1 day after inoculation, and then spread to other tissues, including resin canals of short branches. When PWNs were inoculated onto cross or tangentially cut surfaces of stem segments, maximal PWN migration speed was estimated to be faster through cortical resin canals and xylem axial resin canals vertically (>6.7 and <2.3 mm/h, respectively) than through cortical tissues both vertically and horizontally (<1.2 and <0.2 mm/h). To examine whether PWNs in cortical resin canals could invade surrounding tissues, segments in which PWNs resided only in cortical resin canals were prepared by removing the top portion 6 h after inoculation. Additional incubation of such segments caused extended PWN distribution to xylem axial resin canals and then to other tissues. A similar experiment with top portions of girdled segments removed 12 h after inoculation also showed extended PWN distribution from xylem axial resin canals and pith to cortical resin canals and then to other tissues. These results provided direct evidence that PWNs have the ability to migrate from cortical resin canals and xylem axial resin canals to other tissues.     

Development of a joint system using a compressed wooden fastener II: evaluation of rotation performance for a column-beam joint

In the present study, a plate and a doweled fastener made of compressed wood (CW) were newly introduced into a moment resisting column-beam joint system for a small portal frame structure. A mechanical model that contains not only an axial spring, but also a rotational spring, considered resistant factors to verify how each element resists rotation. Theoretical performance was compared with experimental data. Consequently, the mechanical model was shown to be suitable and the combination of resisting factors was found to be very effective; i.e., the rotational spring provides more influence on the stiffness and moment compared with the axial spring. Large moment and ductility can be achieved by virtue of the high embedding performance of the CW plate in the rotational spring, accompanied with the high shearing performance of the CW dowel in the axial spring.     

Rotational performance of traditional Nuki joints with gap I: theory and verification

The Nuki joints in Taiwan and Japan are similar in appearance; however, due to lack of wedges used in Nuki joints in Taiwan, the gap between the column and beam increases the complexity of timber joints. In this article, the rotational performance of traditional timber joints is reported. A theoretical model considering Hook’s law and Hankinson’s formula was developed for predicting the rotational performance of Nuki joints with gaps. A total of 24 specimens was tested and used to verify the rotational performance of timber joints. The proposed model not only predicts the rotational stiffness of Nuki joints, but can also estimate the initial slip of these joints. Good agreement was found between predicted and experimental data.     

Elastic moduli and stiffness optimization in four-point bending of wood-based sandwich panel for use as structural insulated walls and floors

Several wood-based sandwich panels with low-density fiberboard core were developed for structural insulated walls and floors, with different face material, panel thickness, and core density. The elastic moduli with and without shear effect (E _L, E ₀) and shear modulus (G_b) were evaluated in four-point bending. Generally, the stiffer face, thicker panel, and higher core density were advantageous in flexural and shear rigidity for structural use, but the weight control was critical for insulation. Therefore, optimum designs of some virtual sandwich structures were analyzed for bending stiffness in relation to weight for fixed core densities, considering the manufactured-panel designs. As a result, the plywood-faced sandwich panel with a panel thickness of 95 mm (PSW-T100), with insulation performance that had been previously confirmed, was most advantageous at a panel density of 430 kg/m³, showing the highest flexural rigidity (E _L I = 13 × 10⁻⁶ GNm²) among these panels, where E _L, E ₀, and G _b were 3.5, 5.5, and 0.038 GN/m², respectively. The panel was found to be closest to the optimum design, which meant that its core and face thickness were optimum for stiffness with minimum density. The panel also provided enough internal bond strength and an excellent dimensional stability. The panel was the most feasible for structural insulation use with the weight-saving structure.     

Shear tests of timber joints composed of sugi composite glulam beams using newly developed steel connectors

A research project supported by the Japan Wood Working Machinery Association has been conducted since 1999 to examine the feasibility of sugi (Cryptomeria japonica D. Don) composite glulam beams reinforced with Douglas fir (Pseudotsuga menziesii Franco) lamination. This study, part of the project, was concerned with the strength properties of timber joints composed of composite glulams using newly developed structural steel connectors. Two types of beam were prepared: 10 plies (inner 6 plies sugi, outer 4 plies Douglas fir) and 8 plies (inner 4 plies sugi, outer 4 plies Douglas fir). Two types of structural steel connector, Haratec and Standard, were used for joining the beam with a post or a girder. The relation between load and deformation of the joints was represented as a typical nonlinear curve. Initial stiffness and maximum load of the joint composed of the composite glulam were in the range between those of sugi and Douglas fir. Strength properties of the joints varied with three variables: type of connector, depth of the glulams, and the type of joint. Thus, the allowable loads for the connectors should be determined for each combination of these variables.     

Morphological reproductive characteristics of testes and fertilization capacity of cryopreserved sperm after the Fukushima accident in raccoon (Procyon lotor)

Since the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident, we have established an archive system of livestock and wild animals from the surrounding ex-evacuation zone. Wildlife within the alert zone have been exposed to low-dose-rate (LDR) radiation for a long continuous time. In this study, we analysed the morphological characteristics of the testes and in vitro fertilization (IVF) capacity of cryopreserved sperm of racoons from the ex-evacuation zone of the FDNPP accident. The radioactivity of caesium-137 (¹³⁷Cs) was measured by gamma-ray spectrometry, and the measured radioactivity concentration was 300–6,630 Bq/kg in the Fukushima raccoons. Notably, normal spermatogenesis was observed in the seminiferous tubules of the testes, with the germinal epithelium composed of a spermatogenic cell lineage with no evident ultrastructural alterations; freeze-thawing sperm penetration ability was confirmed using the interspecific zona pellucida-free mouse oocytes IVF assays. This study revealed that the chronic and LDR radiation exposure associated with the FDNPP accident had no adverse effect on the reproductive characteristics and functions of male raccoons.     

Relationship between the stockperson's attitudes and dairy productivity in Japan

The aim of this study is to identify the factors that comprise farmer attitudes toward dairy cows and jobs in Japan, and examine the relationship between these attitudes and dairy productivity. At first, we executed a questionnaire survey to determine factors that comprise attitudes of farmers toward their jobs and dairy cows, and three factors were extracted. These were named as ‘Positive beliefs to cows’, ‘Negative beliefs to cows’ and ‘Job satisfaction’, respectively. Second, we examined the relationships between attitude and dairy productivity in 35 dairy farms. The positive beliefs scores correlated positively both with milk yield and milk urea nitrogen concentration. We found there to be three farm groups by cluster analysis using three attitude score. The group B farms showed significantly higher positive beliefs scores and job satisfaction scores; on the other hand, the group C farms showed significantly lower positive beliefs scores and higher negative belief scores. The milk yield in group B was significantly higher than that in group C. This study showed that Japanese farmers' attitudes toward cows considerably resemble those seen in previous studies in Western cultures. Positive attitudes toward cows could enhance stockmanship, and could improving animal welfare and productivity.