Optimization of the extraction of antioxidants from Dunaliella salina microalga by pressurized liquids

In this work, extraction of antioxidant compounds from Dunaliella salina microalga is optimized by combining pressurized liquid extraction (PLE) and experimental design (three-level factorial design) with three different solvents (hexane, ethanol, and water). Two main factors were considered, the extraction temperature (40, 100, and 160 degrees C) and the extraction time (5, 17.5, and 30 min). As response variables, the extraction yield (percent dry weight/initial weight) and the antioxidant activity of the extracts (determined using the TEAC method) were used. The parameters of the model were estimated by multiple linear regression. Results showed that the extraction temperature was the factor having the strongest influence (positive) on the two response variables. The best yields were obtained with ethanol at the higher extraction temperature and time tested. Besides, although hexane extracts provided the best antioxidant activity, ethanol extracts were also very active. The chemical characterization of ethanol extracts was carried out using HPLC-DAD, and attempts have been made to correlate their chemical composition with the antioxidant activity measured. Results pointed out that the extracts contained, besides all-trans-beta-carotene and isomers, several different minor carotenoids that seemed to make a contribution to the antioxidant activity of the extracts.     

Tartaric acid recovery from distilled lees and use of the residual solid as an economic nutrient for lactobacillus

The recovery of tartaric acid (TA) from distilled vinification lees coming from the white and red winemaking technology was optimized using response surface methodology and Statistica 5.0 software. The sequential treatment of dissolving TA and further calcium tartrate (CaT) precipitation could be used to recover up to 92.4% of the initial TA when distilled white lees were used. The residual lees were employed as economic nutrients for lactic acid production by Lactobacillus pentosus CECT-4023 using hemicellulosic vine shoot hydrolysates as carbon source. Distilled lees after TA extraction used as nutrients provided values of lactic acid (18.4-18.9 g/L), global volumetric productivities (0.82-0.84 g/L.h), and product yields (0.69-0.70 g/g) similar to those achieved when using the general medium for Lactobacilli (18.6 g/L, 1.11 g/L.h, and 0.62 g/g, respectively) or lees without TA extraction (16.4-17.2 g/L, 0.96-1.21 g/L.h, and 0.61-0.66 g/g, respectively). This technology not only avoids pollutant disposal but also represents a commercial source of tartaric acid and economic nutrients for biotechnological processes.     

Effects of various cooking processes on the concentrations of arsenic, cadmium, mercury, and lead in foods

The effects of cooking processes commonly used by the population of Catalonia (Spain) on total arsenic (As), cadmium (Cd), mercury (Hg), and lead (Pb) concentrations in various foodstuffs were investigated. All food samples were randomly acquired in local markets, big supermarkets, and grocery stores of Reus (Catalonia). Foods included fish (sardine, hake, and tuna), meat (veal steak, loin of pork, breast and thigh of chicken, and steak and rib of lamb), string bean, potato, rice, and olive oil. For each food item, two composite samples were prepared for metal analyses, whose levels in raw and cooked (fried, grilled, roasted, and boiled) samples were determined by inductively coupled plasma-mass spectrometry (ICP-MS). The highest concentrations of As, Hg, and Pb (raw and cooked samples) were mainly found in fish, with a clear tendency, in general, to increase metal concentrations after cooking. However, in these samples, Cd levels were very close to their detection limit. In turn, the concentrations of metals in raw and cooked meat samples were detected in all samples (As) or only in a very few samples (Cd, Hg, and Pb). A similar finding corresponded to string beans, rice, and olive oil, while in potatoes, Hg could not be detected and Pb only was detected in the raw samples. In summary, the results of the present study show that, in general terms, the cooking process is only of a very limited value as a means of reducing metal concentrations. This hypothetical reduction depends upon cooking conditions (time, temperature, and medium of cooking).     

Yerba Maté (Ilex paraguariensis) aqueous extract decreases intestinal SGLT1 gene expression but does not affect other biochemical parameters in alloxan-diabetic Wistar rats

Yerba maté (Ilex paraguariensis) is rich in polyphenols, especially chlorogenic acids. Evidence suggests that dietary polyphenols could play a role in glucose absorption and metabolism. The aim of this study was to evaluate the antidiabetic properties of yerba maté extract in alloxan-induced diabetic Wistar rats. Animals (n = 41) were divided in four groups: nondiabetic control (NDC, n = 10), nondiabetic yerba maté (NDY, n = 10), diabetic control (DC, n = 11), and diabetic yerba maté (DY, n = 10). The intervention consisted in the administration of yerba maté extract in a 1 g extract/kg body weight dose for 28 days; controls received saline solution only. There were no significant differences in serum glucose, insulin, and hepatic glucose-6-phosphatase activity between the groups that ingested yerba maté extract (NDY and DY) and the controls (NDC and DC). However, the intestinal SGLT1 gene expression was significantly lower in animals that received yerba maté both in upper (p = 0.007) and middle (p < 0.001) small intestine. These results indicate that bioactive compounds present in yerba maté might be capable of interfering in glucose absorption, by decreasing SGLT1 expression.     

New phenolic compounds and antioxidant potential of Catharanthus roseus

Screening of the phenolic compounds from seeds, stems, leaves and petals of Catharanthus roseus (L.) G. Don (cv. Little Bright Eye) was achieved by HPLC-DAD-ESI-MS/MS. This is the first detailed study of noncolored phenolics in C. roseus, which allowed the characterization of three caffeoylquinic acids and fifteen flavonol glycosides (di- and trisaccharides of kaempferol, quercetin and isorhamnetin). Fifteen compounds are reported for the first time in this species. The scavenging ability of the different plant matrices was assessed against DPPH(*) radical and against reactive oxygen (superoxide radical) and a reactive nitrogen (nitric oxide) species. A concentration-dependent protective effect was observed for seeds and tissues, with petals shown to be the most active.     

Sorption and Desorption of Red 5 and Yellow 6 by a Fe-Zeolitic Tuff

The capacity of an iron-modified zeolite was evaluated for the removal of two dyes (red 5 and yellow 6) use in foodstuff; the regeneration of the dye-saturated materials was also considered. The zeolitic material (clynoptilolite type) was treated with sodium chloride (Na-Ze) and then with ferric chloride (Fe-Ze). The sorption kinetics and isotherms were evaluated, considering the effect of pH on the sorption processes. Sorption?Cregeneration cycles using iron-modified zeolitic material were performed. The sorption kinetics showed that the sodium-modified zeolitic material removed neither red 5 nor yellow 6 dyes, while the iron-modified zeolitic material removed both dyes; the equilibrium time was reached in 48?h for yellow 6, and it was almost reached in the same time for red 5, the removal percentage for red 5 was 89.4?% and for yellow 6 was 96.7?%. The experimental data showed best adjustment to the pseudo-first-order model (Lagergren), which is based on a superficial reaction. The sorption capacities obtained by the sorption isotherms were 1.6 and 1.7?mg/g for red 5 and yellow 6, respectively. The experimental data were best adjusted to the Langmuir?CFreundlich model which indicates that the sorption takes place on a heterogeneous material. It was also observed that the sorption capacities increase as the pH decreases. The results on the desorption processes showed that the best regenerator agent was Fenton??s reagent; the capacities increased in each sorption?Cregeneration cycle using this reagent; for the red 5, the sorption percentage was 73.6?% in the first cycle and 96.3?% in the third cycle and for yellow 6, the removal percentage was 66.7?% in the first cycle and 80.5?% in the second.     

Relationship between cyanogenic compounds in kernels, leaves, and roots of sweet and bitter kernelled almonds

The relationship between the levels of cyanogenic compounds (amygdalin and prunasin) in kernels, leaves, and roots of 5 sweet-, 5 slightly bitter-, and 5 bitter-kernelled almond trees was determined. Variability was observed among the genotypes for these compounds. Prunasin was found only in the vegetative part (roots and leaves) for all genotypes tested. Amygdalin was detected only in the kernels, mainly in bitter genotypes. In general, bitter-kernelled genotypes had higher levels of prunasin in their roots than nonbitter ones, but the correlation between cyanogenic compounds in the different parts of plants was not high. While prunasin seems to be present in most almond roots (with a variable concentration) only bitter-kernelled genotypes are able to transform it into amygdalin in the kernel. Breeding for prunasin-based resistance to the buprestid beetle Capnodis tenebrionis L. is discussed.     

Enzyme-mediated solvent extraction of carotenoids from marigold flower (Tagetes erecta)

Marigold flowers are the most important source of carotenoids for application in the food industry. However, the extraction gives almost 50% losses of the carotenoids depending on conditions for silaging, drying, and solvent extraction. In the past decades, macerating enzymes have been successfully applied to improve the extraction yield of valued compounds from natural products. In this work, an alternative extraction process for carotenoids is proposed, consisting of a simultaneous enzymatic treatment and solvent extraction. The proposed process employs milled fresh flowers directly as raw material, eliminating the inefficient silage and drying operations as well as the generation of hard to deal with aqueous effluents present in traditional processes. The process developed was tested at the 80 L scale, where under optimal conditions a carotenoid recovery yield of 97% was obtained.     

Influence of disaccharide structure on prebiotic selectivity in vitro

To obtain structure-function information of a range of carbohydrates, which are available only in very small quantities, an in vitro fermentation method using 7 mg of carbohydrate, 0.7 mL of basal medium, and 1% (w/v) of fecal bacteria was validated against a pH-controlled batch culture with 150 mL of basal medium and 1.5 g of test carbohydrate. This method was used to determine the influence of different glycosidic linkages and monosaccharide compositions of disaccharides on the selectivity of microbial fermentation. A prebiotic index (PI) was calculated for each disaccharide. Generally, disaccharides with linkages of 1-2, 1-4, and 1-6 generated a high PI score, with kojibiose and sophorose showing the greatest values (21.62 and 18.63, respectively). Apart from 6alpha-mannobiose, mannose-containing disaccharides gave a low PI due to low numbers of bifidobacteria and lactobacilli and an increase in bacteroides. The structure-function information obtained in this study may lead to a predictive understanding of how specific structures are fermented by the human gut microflora.