Determining transpiration from meteorological data and crop characteristics for irrigation management

Summary Traditional meteorological estimates of evapotranspiration include empirical crop factors which are inadequate for scheduling high frequency irrigation. The performance of a transpiration model was tested and adapted to suit the operational requirements of automated irrigation systems. Hourly measurements of global solar radiation, air temperature, humidity and wind speed, obtained from an automatic weather station are inputs to the model. Additional inputs include daily updated data of plant height and leaf area index. This information is processed to determine the active coupling surface between the crop and the atmosphere. The model takes into account the resistance of the leaf to diffusion of water vapor.Calculated transpiration, based on the model, matched very closely measurements of latent heat flux in an irrigated cotton field. It was also in good agreement with water uptake measured in stems of the cotton plants using a heat pulse technique. The test also showed that implementation of the model in the field under study would have improved the efficiency of water application.Contribution from the Agricultural Research Organization, The Volcani Center, Bet Dagan, Israel, No. 1855-E, 1986 series     

The impact of extraction methodologies on the toxicity of sediments in the zebrafish (Danio rerio) embryo test

Purpose

Traditionally, methods for sediment extractions are characterised using chemical analyses. However, in order to evaluate sediment extracts with regard to biological effects and, thus, bioaccessibility, extraction methods have to be compared to effect data obtained from experiments with in situ exposure scenarios, i.e., sediment contact tests. This study compares four extraction methods and sediment contact test data from a previous project with respect to predictive power in the fish embryo test with zebrafish (Danio rerio).

Materials and methods

A natural and an artificial sediment spiked with a mixture of six organic pollutants (2,4-dinitrophenol, diuron, fluoranthene, nonylphenol, parathion and pentachlorophenol) were extracted using (a) membrane dialysis extraction (MDE), (b) a Soxhlet procedure, (c) hydroxypropyl-??-cyclodextrin (HPCD) or (d) Tenax^®-TA. Whereas the former two are regarded being exhaustive with respect to non-covalently bound contaminants, the latter two are considered to predict bioaccessibility. Resulting extracts were tested in the fish embryo assay with D. rerio for embryotoxic and teratogenic potential.

Results and discussion

Mortalities caused by organic extracts from Soxhlet extraction and MDE were high. However, HPCD extracts turned out to be at least as effective as extracts obtained with these two methods. One possible reason might be short ageing time of the spiked sediments. Only Tenax^®-TA extracts gave results comparable to the sediment contact assay for natural sediment, but revealed low reproducibility. Significant differences between natural and artificial sediment were found for extracts obtained with techniques using native (i.e., non-freeze-dried) sediments, i.e., HPCD and Tenax^®-TA. In contrast, MDE and Soxhlet extracts used freeze-dried sediment and did not differentiate between natural and artificial sediment. Therefore, freeze-drying has likely altered and equalised sediment properties that influence accessibility, such as composition of bacterial communities and organic matter quality.

Conclusions

Four extraction methods were successfully characterised with respect to their stringency and predictiveness for bioaccessibility. MDE was confirmed as an alternative to Soxhlet extraction. High mortalities induced by HPCD extracts underline the need to include ageing into consideration when assessing sediments. Although Tenax^®-TA may basically be used to predict bioaccessibility in the fish embryo test, the high variability observed warrants further investigation of the relation between effect and extractability. Apparently, freeze-drying can severely affect sediment properties, potentially eliminating individual properties of natural sediments.     

Effect of forest structure and health on the relative surface temperature captured by airborne thermal imagery – Case study in Norway Spruce-dominated stands in Southern Finland

The effect of forest structure and health on the relative surface temperature captured by airborne thermal imagery was investigated in Norway Spruce-dominated stands in Southern Finland. Airborne thermal imagery, airborne scanning light detection and ranging (LiDAR) data and 92 field-measured sample plots were acquired at the area of interest. The surface temperature correlated most negatively with the logarithm of stem volume, Lorey’s height and the logarithm of basal area at a resolution of 254?m² (9?m radius). LiDAR-derived metrics: the standard deviations of the canopy heights, canopy height (upper percentiles and maximum height) and canopy cover percentage were most strongly negatively correlated with the surface temperature. Although forest structure has an effect on the detected surface temperature, higher temperatures were detected in severely defoliated canopies and the difference was statistically significant. We also found that the surface temperature differences between the segmented canopy and the entire plot were greater in the defoliated plots, indicating that thermal images may also provide some additional information for classifying forests health status. Based on our results, the effects of forest structure on the surface temperature captured by airborne thermal imagery should be taken into account when developing forest health mapping applications using thermal imagery.     

Assemblages of wood-inhabiting fungi related to silvicultural management intensity in beech forests in southern Germany

Current silvicultural treatments in beech forests are aimed at achieving thick logs without discoloured hardwood. Therefore intensive thinning is applied already in younger stands with the objective of large-sized trunks at an age of 100 years. However, this approach bears the risk that dead wood structures and broken trees are completely removed from the forest. The impact of three different silvicultural management intensity levels on wood-inhabiting fungi over decades was investigated in a large beech forest (>10,000 ha) in southern Germany in 69 sampling plots: A Intensive Thinning and Logging with high-value trees, B Conservation-Oriented Logging with integration of special structures such as dead wood and broken trees and C Strict Forest Reserves with no logging for 30 years. The analysis of community showed marked differences in the fungus species composition of the three treatments, independent of stand age. The relative frequencies of species between treatments were statistically different. Indicator species for naturalness were more abundant at sites with low silvicultural management intensity. Fomes fomentarius, the most common fungus in virgin forests and strict forest reserves, is almost missing in forests with high-management intensity. The species richness seemed to be lower where intensive thinning was applied (P = 0.051). Species characteristic for coarse woody debris were associated to low management intensity, whereas species with a significant preference for stumps became more frequent with increasing management intensity. A total amount of dead wood higher than 60 m³/ha was found to enable significantly higher numbers of species indicators of naturalness (P = 0.013). In conclusion, when applying intensive silvicultural treatment, the role of dead wood needs to be actively considered in order to maintain the natural biocoenosis of beech forests.     

Studies of enzymatic oxidation of TMP-fibers and lignin model compounds by a Laccase–Mediator-System using different 14C and 13C techniques

In this work, the results of the enzymatic oxidation of TMP-fibers (thermomechanical pulp) and a well-structured lignin model compound, the dehydropolymer (DHP), were investigated by different ¹⁴C and ¹³C methods, caused by a Laccase–Mediator-System (LMS). These methods are the nuclear magnetic resonance spectroscopy (¹³C-NMR) with DHP (unmarked) and the determination of the ¹⁴CO₂ release of ¹⁴C-marked DHP and TMP-fibers. The ¹³C-NMR measurements were chosen to analyze the structural changes of the LMS-treated DHP model compounds and TMP-fibers qualitatively and quantitatively. The data of ¹⁴CO₂ release give an explanation of the demethylation of DHP and TMP-fibers. The effect of the LMS is shown by comparing the results in respect of DHP and TMP-fibers, which were only treated with laccase and of an inactivated LMS as the control. Comparing the results of the ¹³C-NMR method, in particular the use of the Mediator during the enzymatical treatment, showed significant changes in the structure of the DHP. Also, the TMP-fibers were materially influenced by the LMS. The analysis of the ¹⁴CO₂ release data of the ¹⁴C-marked DHP and TMP-fibers revealed that the rate of ¹⁴CO₂ increases in the ¹⁴C-2 atom as well as in the O¹⁴CH₃ group within the first hour of Laccase–Mediator incubation. Therefore, the ¹⁴CO₂ release from the DHP was higher than from the TMP-fibers.     

Influence of soil acidity on depth gradients of microbial biomass in beech forest soils

The objectives of the study were to investigate mineral soil profiles as a living space for microbial decomposers and the relation of microbial properties to soil acidity. We estimated microbial biomass C on concentration (g g^–1 DW) as well as on volume basis (g m^–2) and the microbial biomass C to soil organic C ratio along a vertical gradient from L horizon to 20 cm in the mineral soil and along a gradient of increasing acidity at five beech forest stands in Germany. Microbial biomass C concentration ranged from 17,000–34,000 g C_mic g^–1 DW in the litter layer and decreased dramatically down the profile to 29–264 g C_mic g^–1 DW at 15–20 cm depth in the mineral soil. This represents depth gradients of microbial biomass C concentrations ranging from a factor of 65 in slightly acidic and up to 875 in acidic soils. In contrast, microbial biomass C calculated on a volume basis (g C_mic m^–2) showed a different pattern since a considerable part of the microbial biomass C was located in the mineral soils. In the soil profile 22–34% of the microbial biomass C was found in the mineral soil at strictly acidic sites and as much as 64–88% in slightly acidic soils. The microbial biomass C to soil organic carbon ratios decreased in general down from the L horizon in the forest floor to 0–5 cm depth in the mineral soils. In strongly acidic mineral soils however, the C to soil organic carbon ratio increased with depth, suggesting a positive relation to increasing pH. We conclude from depth gradients of soil pH and microbial biomass C to soil organic carbon ratio that pH affects this ratio at acidic sites. The inter-site comparison indicates that acidity restricts microbial biomass C in the mineral soils.     

Phosphorus release from forest harvesting on an upland blanket peat catchment

The aim of this study was to investigate the release of phosphorus (P) to receiving waters resulting from harvesting 34-year-old lodgepole pine trees in an upland peat catchment. The study site was within a 25.3-hectare (ha) area, and was drained by a stream that received flows from ploughed furrows, mainly, via collector drains, and discharged directly to the salmonid Shrahrevagh River, Burrishoole, Co. Mayo, Ireland. The study site was divided into two parts: the upstream part was left intact and the downstream part was harvested in early Autumn 2005 following implementation of forest guidelines. Good management practices such as proper use of brash mats and harvesting only in dry weather were implemented. Two instrumented stations were established – one just upstream (US) and the other just downstream (DS) of the clearfelled area. The measurement of P concentrations at the two stations commenced in May 2005, two months before the harvesting started. The daily mean P concentration at the DS station increased from about 6 μg L⁻¹ of total reactive phosphorus (TRP) during pre-clearfelling to 429 μg L⁻¹ in August 2006. By October 2009, four years after clearfelling, the P concentrations at the DS station had returned to pre-clearfelling levels. In the first three years after harvesting, up to 5.15 kg ha⁻¹ of TRP was released from the harvested catchment to the receiving water; in the second year alone, 2.3 kg ha⁻¹ of TRP was released. Linear regression can be used to describe the relationship between TRP load and water discharge. About 80% of the total phosphorus (TP) in the study stream was soluble and more than 70% of the P release occurred in storm events, indicating that traditional buffer strips with widths of 15–20 m might not be efficient for P immobilization. The P concentrations were affected by antecedent weather conditions and highest concentrations occurred during storm events following prolonged drought periods. The water extractable phosphorus (WEP) contents in the soil were significantly higher below windrow/brash material than in brash-free areas, and whole-tree harvesting should be studied as one of the means to decrease P export from blanket peats.     

Herb-layer diversity in deciduous forests: Raised by tree richness or beaten by beech?

Where natural production capacity permits, modern silvicultural management in Central Europe frequently aims at the development of mixed broadleaved stands, instead of pure European beech (Fagus sylvatica) stands. It is crucial to study the effects of these tree-layer diversity variations on herb-layer vegetation, since herb-layer vegetation contributes significantly to ecosystem functioning in forests. In Hainich National Park (Thuringia, Germany), we conducted observational research in deciduous stands to investigate whether herb-layer diversity was related to canopy-layer diversity, and to ascertain possible causal mechanisms. We found that herb-layer vegetation of deciduous forest stands rich in canopy species appeared to be more diverse than herb-layer vegetation of beech-dominated stands. We surmise that herbaceous understorey diversity was indirectly influenced by canopy tree species through the medium of the altered environmental factors soil pH and litter layer thickness. Apparently, lower beech proportion had a more profound effect than the number of secondary tree species. There were no correlations between herb-layer diversity and light transmissibility of the canopy layer, indicating that the light factor was not crucial for herb-layer diversity. At least for the Hainich research sites, our results indicated that small-scale light and soil heterogeneity is insignificant for herb-layer diversity. We found several herb-layer species whose occurrence was particularly correlated with tree-layer diversity and environmental factors. Remarkably, all species positively correlated with soil pH were important for the phytosociological classification of the research sites. Beech-dominated research sites showed high tree-layer volumes, whereas research sites with high tree-layer diversity tended to feature lower tree-layer volumes. These findings could be the result of differing former silvicultural systems and varying soil clay contents affecting tree species composition. In contrast, herb-layer biomass was positively correlated with tree-layer diversity. Herb-layer productivity might be promoted in more diverse research sites by increased nutrient supply and base saturation. It is also possible that greater beech proportion interfered with herb-layer productivity. However, herb-layer biomass was also positively correlated with herb-layer diversity. Hence, our study hints that positive diversity-functioning relationships might occur in the herb-layer of the deciduous forest under investigation.     

Fresh-stem bending of silver fir and Norway spruce

The bending and growth characteristics of large fresh stems from four silver fir (Abies alba Mill.) and three Norway spruce (Picea abies (L.) Karst.) trees were studied. Twenty logs taken from different stem heights were subjected to four-point bending tests. From the bending test records, we calculated stress-strain curves, which accounted for detailed log taper, shear deformation and self weight. From these curves we determined, among other parameters, the modulus of elasticity (MOE), the modulus of rupture (MOR) and the work absorbed in bending (W). No significant differences were found between species for the wood properties examined. Values of MOE, MOR and W generally decreased with stem height, with MOR in the range of 43 to 59 MPa and MOE ranging from 10.6 to 15.6 GPa. These MOE values are twice or more those reported for stems of young Sitka spruce (Picea sitchensis (Bong.) Carr.) trees. Based on the radial growth properties measured in discs from the logs, we calculated predicted values of MOE and MOR for the stem cross section. The predictions of MOE were precise, whereas those of MOR were approximate because of a complex combination of different failure mechanisms. Methods to test and calculate MOE, MOR and W for the stems of living trees are discussed with the aim of improving analyses of tree biomechanics and assessments of forest stability protection.