Temporal trends in the foliar nutritional status of the French, Walloon and Luxembourg broad-leaved plots of forest monitoring

? Two decades after the launching of the monitoring program of forest ecosystems in Europe (ICP forests), a unique data set is now available regarding the foliar nutritional status of the main broad-leaved species growing in much-diversified sites (soil, climate).

? This study focuses on the foliar concentration time series (1993 to 2005) of the French (RENECOFOR), Walloon and Luxemburg broad-leaved plots. The aim is to show long-term trends while taking the inter-plot and inter-annual variability into account.

? Two kinds of statistical processing were used to analyze the data on foliar chemistry: principal component analysis (PCAs) and linear mixed models. In general, the main temporal trends reveal a decrease in the foliar P concentration and a decrease in the foliar Ca concentration, except for European beech on acid soils.

? These temporal patterns confirm the trends previously observed and could be explained by the joint actions of several processes that influence tree nutrition in the long term: tree age, N and S deposition, harvesting and climate.

     

Fresh-stem bending of silver fir and Norway spruce

The bending and growth characteristics of large fresh stems from four silver fir (Abies alba Mill.) and three Norway spruce (Picea abies (L.) Karst.) trees were studied. Twenty logs taken from different stem heights were subjected to four-point bending tests. From the bending test records, we calculated stress-strain curves, which accounted for detailed log taper, shear deformation and self weight. From these curves we determined, among other parameters, the modulus of elasticity (MOE), the modulus of rupture (MOR) and the work absorbed in bending (W). No significant differences were found between species for the wood properties examined. Values of MOE, MOR and W generally decreased with stem height, with MOR in the range of 43 to 59 MPa and MOE ranging from 10.6 to 15.6 GPa. These MOE values are twice or more those reported for stems of young Sitka spruce (Picea sitchensis (Bong.) Carr.) trees. Based on the radial growth properties measured in discs from the logs, we calculated predicted values of MOE and MOR for the stem cross section. The predictions of MOE were precise, whereas those of MOR were approximate because of a complex combination of different failure mechanisms. Methods to test and calculate MOE, MOR and W for the stems of living trees are discussed with the aim of improving analyses of tree biomechanics and assessments of forest stability protection.     

Changes of soil chemistry,stand nutrition,and stand growth at two Scots pine (<Emphasis Type="Italic">Pinus sylvestris</Emphasis> L.) sites in Central Europe during 40 years after fertilization,liming, and lupine introduction

Long-term (40 years) effects of two soil amelioration techniques [NPKMgCa fertilization + liming; combination of PKMgCa fertilization, liming, tillage, and introduction of lupine (Lupinus polyphyllus L.)] on chemical topsoil properties, stand nutrition, and stand growth at two sites in Germany (Pfaffenwinkel, Pustert) with mature Scots pine (Pinus sylvestris L.) forest were investigated. Both sites are characterized by base-poor parent material, historic N and P depletion by intense litter-raking, and recent high atmospheric N input. Such sites contribute significantly to the forested area in Central Europe. Amelioration resulted in a long-term increase of pH, base saturation, and exchangeable Ca and Mg stocks in the topsoil. Moreover, significant losses of the forest floor in organic carbon (OC) and nitrogen stocks, and a decrease of the C/N ratio in the topsoil were noticed. The concentrations and stocks of OC and N in the mineral topsoil increased; however, the increases compensated only the N, but not the OC losses of the forest floor. During the recent 40 years, the N nutrition of the stands at the control plots improved considerably, whereas the foliar P, K, and Ca concentrations decreased. The 100-fascicle weights and foliar concentrations of N, P, Mg, and Ca were increased after both amelioration procedures throughout the entire 40-year period of investigation. For both stands, considerable growth acceleration during the recent 40 years was noticed on the control plots; the amelioration resulted in an additional significant long-term growth enhancement, with the NPKMgCa fertilization liming + being more effective than the combination of PKMgCa fertilization, liming, tillage, and introduction of lupine. The comprehensive evaluation of soil, foliage, and growth data revealed a key relevance of the N and P nutrition of the stands for their growth, and a change from initial N limitation to a limitation of other growth factors (P, Mg, Ca, and water).     

Rockfall and snow avalanche impacts leave different anatomical signatures in tree rings of juvenile Larix decidua

Rockfall and snow avalanche events often cause injury to European larch (Larix decidua Mill.) trees, giving rise to the formation of callus tissue and tangential rows of traumatic resin ducts (TRDs). We analyzed and quantified anatomical reactions of juvenile trees injured before the start of the growing season by snow avalanches (15 trees, 324 cross sections) or rockfalls (18 trees, 270 cross sections). Traumatic resin ducts were observed in the growth ring formed following injury in 94.3% of the rockfall samples and 87.3% of the snow avalanche samples. Traumatic resin ducts were formed at the beginning of the new annual ring around wounds caused by rockfalls. In contrast, in trees injured by snow avalanches, TRDs were not formed until after the formation of several rows of early earlywood (EE) tracheids (mean +/- SD = 4.19 +/- 2.56 rows). The dimensions of the EE tracheids observed in the snow avalanche samples were greatly reduced in the tissues bordering the wound, with radial width reaching an average of only 50% and lumen cross-sectional area an average of only 46% of pre-event values. It is therefore possible to differentiate injuries due to past snow avalanches from injuries due to rockfall based on anatomical growth reactions in the tissues bordering scars.     

Testing dependence between growth and needle litterfall in Scots pine--a case study in northern Finland

Both drought and fungal disease increase needle litterfall of Scots pine (Pinus sylvestris L.) trees, but most factors causing annual variation in needle litterfall are poorly understood. We hypothesized that radial growth and weather conditions favorable to growth correlate positively with needle litterfall with a lag equal to the number of needle cohorts (here being 5-6). We studied the time series of needle litterfall, stem increment, pollen cone litter and daily weather conditions in a Scots pine stand over 43 years (1961-2004). The cross-correlations of standardized time series were estimated with various lags. Model predictions of annual needle litterfall were tested against independent data. Changes in annual growth and needle litterfall correlated with lags of 0 and 4 years. The best predictors for needle litterfall were May to mid July temperature sum with a lag of 4 years, May rainfall with a lag of 2 years and September temperature with a lag of 6 years. Pollen cone litter correlated negatively with needle litterfall with a lag of 2 years. The study provided empirical evidence that needle litterfall of Scots pine in northern Finland is influenced by needle production and needle mass development that occurred 4 to 6 years earlier.     

Effect of tree-level airborne laser-scanning measurement accuracy on the timing and expected value of harvest decisions

The objective was to compare tree-level airborne laser-scanning (ALS) data accuracy with standwise estimation data accuracy as input data for forest planning, using tree- and stand-level simulators. The influence of the input data accuracy was studied with respect to (1) timing of the next thinning or clear-cutting and (2) the relative variation in the predicted income of the next logging expressed as the net present value (NPV). The timing and predicted NPV of thinning and clear-cutting operations were considered separately. The research was based on Monte Carlo simulations carried out with the tree- and stand-level simulators using a simulation and optimisation (SIMO) framework. The simulations used treewise measurements taken on 270 circular plots measured at the Evo Field Station, Finland, as input data. Deviations in the tree data measured were generated according to the mean standard errors found in standwise field estimation and tree-level ALS. The accuracy factors of ALS individual tree detection were based on the EUROSDR/ISPRS Tree Extraction Project. The results show that input data accuracy significantly affects both the timing and relative NPV of loggings. Tree-level ALS produces more accurate simulation results than standwise estimation with the error levels assumed. Diameter-based characteristics are the most important input data in all simulations. Accurate tree height estimates cannot be fully utilised in current simulators.     

Drivers of bryophyte diversity allow implications for forest management with a focus on climate change

Understanding the major drivers of diversity in forests is crucial for ecologists, conservationists, and particularly forest managers. In most forested habitats, bryophytes are diverse and important primary producers. Here we report the first study of the relative importance of regional macroclimate as compared to local variables on abundance, species richness, and community composition of bryophytes growing in soil and in dead wood in a mountain temperate forest. Using PCA axes, we built predictor sets for macroclimate, microclimate, soil attributes, and dead wood availability. The explanatory power of each set was tested using variance partitioning. Abundance and species richness of soil bryophytes was best explained by microclimate, whereas the community composition did not distinctively differ between the environmental sets. In contrast, dead wood bryophyte abundance, species richness, and community composition was clearly driven by macroclimate. Among the single axes, the component represented best by soil moisture was the main driver for soil bryophyte abundance. In contrast, dead wood bryophyte abundance was mostly affected by components correlated with minimum global radiation and minimum temperatures as well as by the component represented by dead wood. The component represented by canopy openness was superior in explaining the community composition of both soil and dead wood bryophytes. We conclude that (1) dead wood amounts should be increased in closed stands to act as a buffer during climate changes, and (2) open canopy, which provides important habitats for soil-inhabiting bryophytes, should be provided by management with slow reforestation after natural or logging openings.     

Assemblages of wood-inhabiting fungi related to silvicultural management intensity in beech forests in southern Germany

Current silvicultural treatments in beech forests are aimed at achieving thick logs without discoloured hardwood. Therefore intensive thinning is applied already in younger stands with the objective of large-sized trunks at an age of 100 years. However, this approach bears the risk that dead wood structures and broken trees are completely removed from the forest. The impact of three different silvicultural management intensity levels on wood-inhabiting fungi over decades was investigated in a large beech forest (>10,000 ha) in southern Germany in 69 sampling plots: A Intensive Thinning and Logging with high-value trees, B Conservation-Oriented Logging with integration of special structures such as dead wood and broken trees and C Strict Forest Reserves with no logging for 30 years. The analysis of community showed marked differences in the fungus species composition of the three treatments, independent of stand age. The relative frequencies of species between treatments were statistically different. Indicator species for naturalness were more abundant at sites with low silvicultural management intensity. Fomes fomentarius, the most common fungus in virgin forests and strict forest reserves, is almost missing in forests with high-management intensity. The species richness seemed to be lower where intensive thinning was applied (P = 0.051). Species characteristic for coarse woody debris were associated to low management intensity, whereas species with a significant preference for stumps became more frequent with increasing management intensity. A total amount of dead wood higher than 60 m³/ha was found to enable significantly higher numbers of species indicators of naturalness (P = 0.013). In conclusion, when applying intensive silvicultural treatment, the role of dead wood needs to be actively considered in order to maintain the natural biocoenosis of beech forests.     

Studies of enzymatic oxidation of TMP-fibers and lignin model compounds by a Laccase–Mediator-System using different 14C and 13C techniques

In this work, the results of the enzymatic oxidation of TMP-fibers (thermomechanical pulp) and a well-structured lignin model compound, the dehydropolymer (DHP), were investigated by different ¹⁴C and ¹³C methods, caused by a Laccase–Mediator-System (LMS). These methods are the nuclear magnetic resonance spectroscopy (¹³C-NMR) with DHP (unmarked) and the determination of the ¹⁴CO₂ release of ¹⁴C-marked DHP and TMP-fibers. The ¹³C-NMR measurements were chosen to analyze the structural changes of the LMS-treated DHP model compounds and TMP-fibers qualitatively and quantitatively. The data of ¹⁴CO₂ release give an explanation of the demethylation of DHP and TMP-fibers. The effect of the LMS is shown by comparing the results in respect of DHP and TMP-fibers, which were only treated with laccase and of an inactivated LMS as the control. Comparing the results of the ¹³C-NMR method, in particular the use of the Mediator during the enzymatical treatment, showed significant changes in the structure of the DHP. Also, the TMP-fibers were materially influenced by the LMS. The analysis of the ¹⁴CO₂ release data of the ¹⁴C-marked DHP and TMP-fibers revealed that the rate of ¹⁴CO₂ increases in the ¹⁴C-2 atom as well as in the O¹⁴CH₃ group within the first hour of Laccase–Mediator incubation. Therefore, the ¹⁴CO₂ release from the DHP was higher than from the TMP-fibers.