1-methylcyclopropene increases storability and shelf life in climacteric and nonclimacteric plums

The effect of 1-methylcyclopropene (1-MCP) at three different doses (0.25, 0.50, and 0.75 microL L(-1)) on the ripening processes of a climacteric, cv. Santa Rosa, and a suppressed climacteric type, cv. Golden Japan, plum was studied. For both cultivars, positive effects were observed in terms of inhibition of ethylene production and delays of the physical, chemical, and biochemical changes associated with ripening. 1-MCP-treated plums were firmer with lower weight loss, reduced degrees Brix/titratable acidity ratios, and lower color changes during cold storage and subsequent shelf life at 20 degrees C than controls. For most factors, the effectiveness of 1-MCP was dose-dependent in Santa Rosa but dose-independent for Golden Japan.     

Effect of harvesting and drying conditions on chlorophyll levels of soybean (Glycine max L. Merr)

Chlorophyll in soybean represents a downgrading factor for the crops. Five Brazilian cultivars were harvested between R(6) and R(8) stage of development (Fehr & Caviness scale) and dried at 25 degrees and 40 degrees C. The effect of maturity stages and two drying conditions after harvest were studied to achieve reduction of moisture and chlorophylls to acceptable levels. When seeds were dried at 25 degrees C, even harvesting at early stages of development such as R(6), the green pigments were almost degraded, and 16 ppm of chlorophyll were found at maximum, accompanied by loss of moisture. Moisture and chlorophyll declines as seed matures, but at intermediary stages (R(6)-R(7)), chlorophyll degrades first, so the rate of moisture loss should not be used to predict chlorophyll contents. At 40 degrees C, complete degradation of chlorophyll pigments is only achieved when seeds are swathed from R(7) stage up, otherwise the seed quality could be compromised. Slow drying allows almost complete removal of green pigments, even when seeds are swathed a few days before the physiological maturity stage.     

Tillage effects on microbial biomass and nutrient distribution in soils under rain-fed corn production in central-western Mexico

Quantifying how tillage systems affect soil microbial biomass and nutrient cycling by manipulating crop residue placement is important for understanding how production systems can be managed to sustain long-term soil productivity. Our objective was to characterize soil microbial biomass, potential N mineralization and nutrient distribution in soils (Vertisols, Andisols, and Alfisols) under rain-fed corn (Zea mays L.) production from four mid-term (6 years) tillage experiments located in central-western, Mexico. Treatments were three tillage systems: conventional tillage (CT), minimum tillage (MT) and no tillage (NT). Soil was collected at four locations (Casas Blancas, Morelia, Apatzingán and Tepatitlán) before corn planting, at depths of 0–50, 50–100 and 100–150 mm. Conservation tillage treatments (MT and NT) significantly increased crop residue accumulation on the soil surface. Soil organic C, microbial biomass C and N, potential N mineralization, total N, and extractable P were highest in the surface layer of NT and decreased with depth. Soil organic C, microbial biomass C and N, total N and extractable P of plowed soil were generally more evenly distributed throughout the 0–150 mm depth. Potential N mineralization was closely associated with organic C and microbial biomass. Higher levels of soil organic C, microbial biomass C and N, potential N mineralization, total N, and extractable P were directly related to surface accumulation of crop residues promoted by conservation tillage management. Quality and productivity of soils could be maintained or improved with the use of conservation tillage.     

Chemical authentication of extra virgin olive oil varieties by supervised chemometric procedures.

This work has focused on discriminating extra virgin olive oils from Sabina (Lazio, Italy) by olive fruit variety (cultivar). A set of oils from five of the most widespread cultivars (Carboncella, Frantoio, Leccino, Moraiolo, and Pendolino) in this geographical area was analyzed for chemical composition using only the Official Analytical Methods, recognized for the quality control and commercial classification of this product. The obtained data set was converted into a computer-compatible format, and principal component analysis (PCA) and a method based on the Fisher F ratio were used to reduce the number of variables without a significant loss of chemical information. Then, to differentiate these samples, two supervised chemometric procedures were applied to process the experimental data: linear discriminant analysis (LDA) and artificial neural network (ANN) using the back-propagation algorithm. It was found that both of these techniques were able to generalize and correctly predict all of the samples in the test set. However, these results were obtained using 10 variables for LDA and 6 (the major fatty acid percentages, determined by a single gas chromatogram) for ANN, which, in this case, appears to provide a better prediction ability and a simpler chemical analysis. Finally, it is pointed out that, to achieve the correct authentication of all samples, the selected training set must be representative of the whole data set.     

Enzyme-mediated solvent extraction of carotenoids from marigold flower (Tagetes erecta)

Marigold flowers are the most important source of carotenoids for application in the food industry. However, the extraction gives almost 50% losses of the carotenoids depending on conditions for silaging, drying, and solvent extraction. In the past decades, macerating enzymes have been successfully applied to improve the extraction yield of valued compounds from natural products. In this work, an alternative extraction process for carotenoids is proposed, consisting of a simultaneous enzymatic treatment and solvent extraction. The proposed process employs milled fresh flowers directly as raw material, eliminating the inefficient silage and drying operations as well as the generation of hard to deal with aqueous effluents present in traditional processes. The process developed was tested at the 80 L scale, where under optimal conditions a carotenoid recovery yield of 97% was obtained.     

Effects of pig slurry application on soils and soil humic acids

The effect of three annually consecutive additions of pig slurry at two rates (90 and 150 m3 x ha(-1) x year(-1) on soils and soil humic acids (HAs) was investigated in a field experiment under semiarid conditions. Soils and pig slurries were analyzed by standard methods. The HAs were isolated from soils and pig slurry by a conventional procedure based on alkaline extraction, acidic precipitation to pH 1, purification by repeated alkaline dissolutions and acidic precipitations, water washing, dialysis, and final freeze-drying. The HAs obtained were analyzed for elemental (C, H, N, S, and O) and acidic functional group (carboxylic and phenolic) composition, and by UV-vis, FT-IR, fluorescence, and ESR spectroscopies. With respect to the control soil, the pig slurry amended soils had greater pH and electrical conductivity, slightly larger total N content, and smaller values of C/N ratio. A decrease of total organic C was observed only in soils amended for 2 and 3 years at the higher slurry rate. With respect to control soil HA, pig slurry HA was characterized by larger contents of S- and N-containing groups, smaller acidic functional group and organic free radical contents, a prevalent aliphatic character, extended molecular heterogeneity, and smaller aromatic polycondensation and humification degrees. Amendment with pig slurry HA determines a number of modifications in soil HAs, including increase of C, S, and COOH contents, C/N ratios, and aliphaticity and decrease of extraction yields and N, O, phenolic OH, and organic free radical contents. These effects are generally more evident after the first year of slurry application and tend to disappear with increasing number of treatments. Most probably, over the years the slightly humified slurry HA is mineralized through extended microbial oxidation, whereas only the most recalcitrant components, such as S-containing, phenolic, and aliphatic structures, are partially accumulated by incorporation into soil HA.     

Subcellular localization and isoenzyme pattern of peroxidase and polyphenol oxidase in beet root (Beta vulgaris L.)

The two enzymes involved in enzymatic browning reactions, polyphenol oxidase (PPO) and peroxidase (PO), have been partially purified and extracted from different fractions of beet root. PPO is mainly located in the membrane fraction, and it was also found in the soluble fraction. In both cases PPO was in its latent state. However, PO activity was higher in the soluble fraction than in the membrane fraction. Nevertheless, the highest values of specific activity for PO were obtained from the solubilized enzyme from acetone powders. Under native isoelectric focusing (IEF), several PPO isoenzymes were present in the pH range of 4.8-5.8. All of these isoenzymes shared a single band with a similar apparent mass under sodium dodecyl sulfate-polyacrylamide gel electrophoresis. PO was also analyzed by IEF, showing a complex isoenzyme pattern in all fractions. The characteristic basic PO isoenzyme of high pI found in both the soluble fraction and the solubilized enzyme from acetone powders was not detected in the membrane fraction. The kinetic characterization of PPO and PO from all fractions was carried out.     

Microbial community structure in forest soils treated with a fire retardant

The influence of a fire retardant (Firesorb, an acrylic–acrylamide copolymer) on the microbial community structure determined by phospholipid fatty acid (PLFA) analysis was examined under laboratory conditions using two different textured soils under pine forest. Firesorb was added to unheated and heated soil samples (350°C for 10 min followed by reinoculation, to mimic a forest fire) at three levels of application (none, usual and three times the usual levels), and measurements were made after 12 weeks of incubation. The relative importance of the three factors considered on the PLFA profiles was as follows: soil heating ≫ soil texture ≈ Firesorb treatment. In the unheated soils, Firesorb had a larger effect than soil texture, while the opposite was found in the heated soils. Soil heating reduced the total PLFAs, while Firesorb tended to increase them in both the unheated and heated soils. Soil heating decreased the PLFAs indicative of gram-positive (G⁺) bacteria and tended to increase the fatty acids associated with gram-negative (G⁻) bacteria and, to a lesser extent, the PLFA 18:2ω6, considered to be predominantly of fungal origin. Firesorb treatment decreased the G⁻/G⁺ bacteria ratio in the heated soils but tended to increase it in the unheated soils, the effect being dose dependent.