Cuphea growth, yield, and oil characteristics as influenced by climate and soil environments across the upper Midwest USA

Cuphea is a potential new oilseed crop rich in medium-chain fatty acids (C8:0 to C14:0) that may serve as a renewable, biodegradable source of oil for lubricants, motor oil, and aircraft fuel. Impacts of climate and soil environment on cuphea growth and development are not well understood. The objective of this study was to evaluate the influence of climate and soil on growth, seed yield, and seed oil characteristics of two semi-domesticated cuphea genotypes [PSR23 and HC-10 (Cuphea viscosissima Jacq. × C. lanceolata W.T. Aiton)] and three wild species [Cuphea wrightii, Cuphea lutea, and C. viscosissima (VS-6-CPR-1)] that show potential for domestication. The study was conducted in 2007 and 2008 at field sites in North Dakota (ND), Minnesota (MN), Iowa (IA), and Illinois (IL). Cuphea PSR23 and HC-10 were direct seeded in the field, while the three wild species were transplanted. The two plantings were treated as separate experiments. Plant growth, seed yield and oil content for the two direct-seeded lines tended to be distinctly greater in MN and ND than IL and IA, which was related more to growth temperature than soil environment. The three wild species generally performed similarly across the four different environments. C. wrightii had the greatest oil content, ranging from 320 to 360 g kg⁻¹, which was comprised of 59-64% lauric acid. For each genotype, the content of its most prominent saturated medium-chain fatty acid (e.g., C10:0 or C12:0) increased with decreasing latitude of field site. Seed yields for C. wrightii and C. lutea were as high as 1116 kg ha⁻¹. Combined with relatively high seed oil contents (280-350 g kg⁻¹) these species may be good candidates for domestication. Results indicate that PSR23 and HC-10 are more regionally adapted than the wild species studied, which tended to exhibit a greater range of adaptability to climate and soil conditions.     

Restoring forests: regeneration and ecosystem function for the future

Conventions and policies for biodiversity conservation and climate change mitigation state the need for increased protection, restoration and climate change adaptation of forests. Much degraded land may be targeted for large-scale forest restoration, yet challenges include costs, a shortage of regeneration material and the need for restored forests to serve as a resource for communities. To ensure ecosystem function for the future, forest restoration programs must: (1) learn from the past; (2) integrate ecological knowledge; (3) advance regeneration techniques and systems; (4) overcome biotic and abiotic disturbances and (5) adapt for future forest landscapes. Historical forest conditions, while site-specific, may help to identify the processes that leave long-term legacies in current forests and to understand tree migration biology/population dynamics and their relationship with climate change. Ecological theory around plant–plant interactions has shown the importance of negative (competition) and positive (facilitation) interactions for restoration, which will become more relevant with increasing drought due to climate change. Selective animal browsing influences plant–plant interactions and challenges restoration efforts to establish species-rich forests; an integrated approach is needed to simultaneously manage ungulate populations, landscape carrying capacity and browse-tolerant regeneration. A deeper understanding of limiting factors that affect plant establishment will facilitate nursery and site preparation systems to overcome inherent restoration challenges. Severe anthropogenic disturbances connected to global change have created unprecedented pressure on forests, necessitating novel ecological engineering, genetic conservation of tree species and landscape-level approaches that focus on creating functional ecosystems in a cost-effective manner.

     

Tree breeding model to assess financial performance of pine hybrids and pure species: deterministic and stochastic approaches for South Africa

Financial performance of the P. patula × P. tecunumanii, P. greggii × P. tecunumanii, P. taeda × P. tecunumanii hybrids and their parental species was studied for South Africa. A model was developed for use in determining the profitability of a tree-breeding program (TBP) with pine hybrids in commercial plantations. Growth measurement data were collected in four, 12-year-old genetic trials on Mondi and Sappi land holdings in South Africa. Growth models developed for P. patula and P. taeda in South Africa were used to infer models for the other taxa and to calculate the optimal financial rotation age at discount rates of 6 and 8%. Financial data on pine plantations were collected from different sources in South Africa. Optimal rotation lengths in this study were found to be between 12 and 16 years for pulpwood and 17 years for sawtimber. The model output shows the net present value (NPV), the internal rate of return, and the minimum area that a tree grower has to plant every year in order to justify the investment in a TBP. A stochastic approach with Monte Carlo simulation showed that the sensitivity of NPV to uncertainty in the wood price was greater than that for the planting, harvesting, and transport costs.     

Detection and quantification of airborne inoculum of Hymenoscyphus pseudoalbidus using real‐time PCR assays

A method based on real‐time polymerase chain reaction (PCR) and the use of rotating‐arm spore traps was developed for quantifying airborne Hymenoscyphus pseudoalbidus ascospores. The method was sensitive and reproducible, and the collection efficiency was 10% of the spores present in the air. The temporal ascospore dispersal pattern was studied over 3 years by collecting spores every 15 days for a 24 h air‐sampling period during the ash‐growing season. The highest production was detected from the end of June to the beginning of September. The overall ascospore production did not differ significantly among stands within a specific year but there were differences from year to year. There was a positive correlation between air temperature and the number of ascospores trapped, with most of the positive samples being observed at temperatures above 12°C. The vertical profile of ascospore dispersal showed a strong decrease in ascospore density within a height of 3 m, regardless of date of collection. An analysis of the spore traps installed at increasing distances from an infected stand showed that most of the ascospores were deposited downwind within 50 m of the stand. These data are discussed in context of the epidemiology of the disease.     

Analysis of glyphosate and aminomethylphosphonic acid in water,plant materials and soil

There is a need for simple, fast, efficient and sensitive methods of analysis for glyphosate and its degradate aminomethylphosphonic acid (AMPA) in diverse matrices such as water, plant materials and soil to facilitate environmental research needed to address the continuing concerns related to increasing glyphosate use. A variety of water‐based solutions have been used to extract the chemicals from different matrices. Many methods require extensive sample preparation, including derivatization and clean‐up, prior to analysis by a variety of detection techniques. This review summarizes methods used during the past 15 years for analysis of glyphosate and AMPA in water, plant materials and soil. The simplest methods use aqueous extraction of glyphosate and AMPA from plant materials and soil, no derivatization, solid‐phase extraction (SPE) columns for clean‐up, guard columns for separation and confirmation of the analytes by mass spectrometry and quantitation using isotope‐labeled internal standards. They have levels of detection (LODs) below the regulatory limits in North America. These methods are discussed in more detail in the review. © 2015 Society of Chemical Industry     

Laboratory and exterior decay of wood–plastic composite boards: voids analysis and computed tomography

After exposure in the field and laboratory soil block culture testing, the void content of wood–plastic composite (WPC) decking boards was compared to unexposed samples. A void volume analysis was conducted based on calculations of sample density and from micro-computed tomography (microCT) data. It was found that reference WPC contains voids of different sizes from the micrometer range up to several cubic millimeters. Large voids were unevenly distributed within the composite sample. Void size and volume increased after conditioning the WPC in water at 70°C. Depending on the effect of exposure conditions, fungal decay during laboratory soil block testing increased the size and volume of voids. For laboratory samples, the calculated void volume was much higher compared to microCT-detected voids because of the limited resolution of the instrument on relatively large samples with many nano- and microvoids present in the material. In both laboratory and field samples, the creation of the voids resulted in a significant decrease in composite density. Decay damage observed as an increase in the size and volume of voids was particularly severe for boards exposed in the field. The calculated void volume in such samples was in reasonable agreement with voids detected by microCT.     

Impacts of soil conditions and light availability on natural regeneration of Norway spruce <Emphasis Type="Italic">Picea abies</Emphasis> (L.) H. Karst. in low-elevation mountain forests

? Key message

Natural regeneration of P. abies (L.) H. Karst. may reach high densities in lower mountain elevations. The highest densities were found in sites with moderate light availability, with low pH, and not near the riverbank. However, age-height classes differed in the predicted magnitude of response, but were consistent in response directions. Mosses and understory species typical of coniferous forests were positively correlated with regeneration density.

? Context

Norway spruce Picea abies (L.) H. Karst. in Central Europe is at risk under climate change scenarios, particularly in mountain regions. Little is known about the impact of environmental factors on the natural regeneration of P. abies in low-elevation mountain forests.

? Aims

We aimed to assess impacts of distance from the riverbank, soil pH, and light availability on natural P. abies regeneration. We hypothesized that (1) natural P. abies regeneration would depend on light availability and soil pH and (2) there are understory plant species which may indicate the microsites suitable for natural regeneration of P. abies.

? Methods

The study was conducted in the Sto?owe Mountains National Park (SW Poland, 600–800 m a.s.l.). We established 160 study plots (25 m²) for natural regeneration, light availability, soil pH, and understory vegetation assessment.

? Results

The highest densities of natural regeneration of P. abies were observed in sites with moderate light availability (0.1–0.2 of open sky) and low pH (3.5–4.5), and located relatively far from the riverbank. Cover of 22 understory plant species were correlated with natural P. abies regeneration densities, mostly positively.

? Conclusion

Different stages of natural regeneration of P. abies revealed different regeneration niches. Most understory plant species (bryophytes and herbs typical of coniferous forests) do not compete with natural regeneration of P. abies.

     

Comparison of photosynthetic induction and transient limitations during the induction phase in young and mature leaves from three poplar clones

We tested the hypothesis that leaf age affects photosynthetic induction, because conductance to CO2 diffusion usually decreases with increasing leaf age. Photosynthetic inductions, primarily determined by the light modulation of Rubisco activity and stomatal opening, were investigated in both young and mature leaves, as defined by leaf plastochron index (LPI), from three poplar clones: Populus alba L., P. nigra L. and P. x euramericana (Dode) Guinier. In all clones, maximum assimilation rates (A max), maximum stomatal conductance (G Smax) and dark respiration rates (RD) were higher in young leaves (LPI = 3-5) than in mature leaves (LPI = 10-14), and A max decreased from P. alba via P. x euramericana to P. nigra. The clones with high photosynthetic capacity had low induction states 60 s after leaf illumination (IS60; indicating a slow initial induction phase), and required less time to reach 90% photosynthetic induction (T90). In contrast, the clone with the lowest photosynthetic capacity (P. nigra) exhibited high IS60 (high initial induction state) but a long induction time (high T90). A comparison of mature leaves with young leaves revealed significantly (P < 0.01) lower IS60 values in mature leaves of P. nigra only, and significantly higher T90 values in mature leaves of P. alba only. In all clones, young leaves exhibited a lower percentage of maximum transient stomatal limitation during photosynthetic induction (4-9%) compared with mature leaves (16-30%). Transient biochemical limitation, assessed on the basis of the time constants of Rubisco activation (tau), was significantly higher in mature leaves than in young leaves of P. alba; whereas there were no significant differences in tau between young and mature leaves of the other poplar clones. Thus, our hypothesis that leaf age affects photosynthetic induction was confirmed at the level of transient stomatal limitation, which was significantly higher in mature leaves than in young leaves in all clones. For the induction parameters IS60, T90 and tau, photosynthetic induction was more clone-specific and was dependent on leaf age only in some cases, an observation that may apply to other tree species.     

Potential vector species of carp edema virus (CEV)

During a PCR‐based CEV survey in Poland in 2015–2017, the virus was detected in many farms both in clinical and asymptomatic cases and in common as well as in koi carp (Cyprinus carpio). In order to evaluate the potential carrier role of fish species that share the same habitats with carp, an experimental trial was performed. Investigations carried out on specimens of bleak (Alburnus alburnus), crucian carp (Carassius carassius), European perch (Perca fluviatilis), Prussian carp (Carassius gibelio), roach (Rutilus rutilus) and tench (Tinca tinca) cohabited with CEV‐infected carp yielded positive results. These species of fish were experimentally cohabited with CEV‐infected common carp at a temperature of 16°C ± 1. Material from the brain, gills, spleen, kidneys, intestine and skin was investigated for the presence of CEV DNA. Similar investigations were performed with uninfected fish designated controls. Samples were tested for CEV by qPCR.