Lysimetric study of eucalypt residue management effects on N leaching and mineralization

The effects of woody residues from Eucalyptus globulus Labill. plantations on N losses were assessed through a lysimetric experiment. Treatments were: (NW) forest floor litter and non-woody residues (leaves, bark, twigs) incorporated into the soil; (IP) as NW plus woody residues (branches) cut in 20-cm long pieces and incorporated into the soil; (IC) as IP, but with branches chopped into chips; (SP) non-woody and woody residues (pieces) placed on the soil surface; (SC) as SP plus branches chopped into chips; and (CT) absence of organic residues. Leaching of N-NO ₃ ^? and N-NH ₄ ⁺ was followed during a six-year period and N mineralization was evaluated at the end of the experiment. Non-woody residues enhanced N leaching as compared with the control. Conversely, woody residues decreased N losses. Although differences between treatments were not significant at the end of the experiment, incorporation and fragmentation of woody residues resulted in the more favourable management option regarding the reduction of N leaching observed at short-term. As high amounts of residues were used, the effect observed on decrease N leaching could be higher than that existing in Portuguese eucalypt plantations.     

<Emphasis Type="Italic">Pinus halepensis</Emphasis> somatic embryogenesis is affected by the physical and chemical conditions at the initial stages of the process

Pinus halepensis has been described as a drought-tolerant species with high plasticity to growth in different environments. Its eco-physiological characteristics could facilitate the use of this species in large afforestations in the future scenery of climate change. Somatic embryogenesis is a biotechnological tool with potential for large-scale clonal propagation. In order to establish an improved regeneration protocol for Pinus halepensis, the effects of different temperatures (18, 23, and 28 °C) and water availability conditions (2, 3, and 4 g L^?1 Gelrite^®), during initiation of embryonal masses on the rate of initiation, proliferation, maturation, and the number of embryos developed, were evaluated. It was found that environmental conditions during the initiation stage of Pinus halepensis somatic embryogenesis influence the success of initiation and proliferation. In contrast, there was no effect of these conditions on the maturation rates and the number of somatic embryos. Somatic embryos were obtained in all treatments tested, indicating that plants can be produced from extreme conditions of induction, such as high temperatures (28 °C) and low water availability conditions (4 g L^?1).     

Fruit set dependence on carbohydrate availability in citrus trees

We generated source-sink imbalances by defoliation and sucrose supplementation by stem injection, to investigate effects of carbohydrate availability on fruitlet growth and abscission in cv. Okitsu of Satsuma mandarins (Citrus unshiu (Mak.) Marc.). Partial defoliation promoted fruitlet abscission, whereas sucrose supplementation increased citrus fruit set by more than 10%. Moreover, when applied together, sucrose supplementation counteracted the effect of partial defoliation on fruit set. When sucrose was supplied continuously from flowering until harvest, it increased the concentrations of soluble and insoluble sugars in fruits. We conclude that fruit set in citrus is highly dependent on carbohydrate availability.     

Kinetics of leaf temperature fluctuation affect isoprene emission from red oak (Quercus rubra) leaves

Because the rate of isoprene (2-methyl-1,3-butadiene) emission from plants is highly temperature-dependent, we investigated natural fluctuations in leaf temperature and effects of rapid temperature change on isoprene emission of red oak (Quercus rubra L.) leaves at the top of the canopy at Harvard Forest. Throughout the day, leaves often reached temperatures as much as 15 degrees C above air temperature. The highest temperatures were reached for only a few seconds at a time. We compared isoprene emission rates measured when leaf temperature was changed rapidly with those measured when temperature was changed slowly. In all cases, isoprene emission rate increased with increasing leaf temperature up to about 32 degrees C and then decreased with higher temperatures. The temperature at which isoprene emission rates began to decrease depended on how quickly measurements were made. Isoprene emission rates peaked at 32.5 degrees C when measured hourly, whereas rates peaked at 39 degrees C when measurements were made every four minutes. This behavior reflected the rapid increase in isoprene emission rate that occurred immediately after an increase in leaf temperature, and the subsequent decrease in isoprene emission rate when leaf temperature was held steady for longer than 20 minutes. We concluded that the observed temperature response of isoprene emission rate is a function of measurement protocol. Omitting this parameter from isoprene emission models will not affect simulated isoprene emission rates at mild temperatures, but can increase isoprene emission rates at high temperatures.     

Long-term prospective evaluation of intestinal anastomosis using stainless steel staples in 14 dogs

This prospective clinical study evaluated the use, complications, and clinical and ultrasonographic follow-ups of end-to-end intestinal anastomoses with skin staples in naturally occurring diseases in canine small and large intestines. Intestinal anastomoses were performed in 14 dogs and pre-, peri-, and postoperative data were recorded. Postoperative clinical and ultrasound evaluations were performed at regular intervals for 1 year. The mean time taken to construct the anastomosis was 5 min. There were no intraoperative complications. Hemorrhage and colonic stricture were the main postoperative complications. Staple loss occurred in 2 cases. Absence of wall layering and focal wall thickening were observed in all cases at each ultrasonographic follow-up. Hyperechoic fat was observed in all but 1 of the cases at month 1. Nine dogs were alive with normal digestive function at the end of the study. The skin stapler technique enabled rapid construction of consistent anastomoses with inexpensive stapling material.     

A pre-synchronization program at early postpartum might increase the chances of Bos indicus cows cycling prior to 50 days regardless of the length of calf separation

The aim of this study was to establish if pre-synchronization would enhance the number of animals cycling prior to conventional breeding at 45 days irrespective of the length of calf separation. Multiparous Bos indicus cows were allotted in four groups (n = 10). Control group (C) dams remained with their calves; groups G24, G48 and G72, which were partially weaned for 24, 48 and 72 h, respectively, were estrus synchronized using a controlled internal drug. These procedures were performed at 25 days and again at 45 days postpartum. The number of follicles, presence of a corpus luteum and back fat thickness (BFT) were determined by ultrasound. The proportion of cows with estrus and ovulation at day 25 postpartum was statistically different between the control and treated groups, with the values being 20, 60, 50 and 70 for the control, G24, G48 and G72 groups respectively (P < 0.05). At days 45 postpartum, the proportion of cows with estrus and ovulation was different in group G48 compared with the other groups (P <0.05). The average BFT and body condition score for the four experimental groups in the two periods were similar (P >0.05). Animals with a higher proportion of follicles from 17 to 21 mm, BFT values above 3.5 mm and a regular body condition were significantly different regardless of whether the dams remained with their calves or were separated, regardless of the length of this event. It can be concluded that (1) a pre-synchronization program at day 25 could trigger the onset of ovarian activity and facilitate a breeding program at day 50 and (2) temporary weaning enhances the effect of a pre-synchronization program.     

Essential oils-based repellents for the management of Myzus persicae and Macrosiphum euphorbiae

Journal of Pest Science - Aphids are one of the major agricultural pests in the world. Their pest management in pepper greenhouses is based on integrated control with release of natural enemies and...     

Nitrogen loading of Eucalyptus globulus seedlings: nutritional dynamics and influence on morphology and root growth potential

New Forests - Achieving successful outplanting of trees on increasingly harsher sites is a global concern. In Chile, for example, new Eucalyptus globulus plantations are being targeted to poorer,...     

Stocking density evaluation on Catarina scallop (Argopecten ventricosus,Sowerby II, 1842) larvae to improve hatchery production

The Catarina scallop Argopecten ventricosus is a highly valued resource. Although its hatchery spat production has already been reported, the effects of initial larval stocking density have never been reported for production purposes. This study evaluates A. ventricosus growth and survival in triplicate using three stocking densities: low (LD; 2 larvae mL^?1), medium (MD; 4 larvae mL^?1), and high (HD; 6 larvae mL^?1). Three-day old larvae were reared in 18-L plastic carboy at 25.6?±?0.5 °C and fed with a microalgal blend of Isochrysis galbana and Chaetoceros calcitrans (1:1 cell number ratio) for 7 days, equivalent to 10 post-fertilization days (PFD). Higher specific growth rate was recorded at LD (15.8?±?0.2%) after 8 PFD of culture compared to MD (1.6?±?0.5%) and HD (4.1?±?1.8%) densities. The least time required for 60% of the larvae to reach the pediveliger stage was recorded at LD condition (10 PFD). Higher survival was recorded at HD (58.8?±?3.1%) at 8 PFD compared to MD (53.5?±?3.1%) and LD (43.9?±?3.0%). After 8 PFD, stocking density was highly related to larval growth and survival. To increase production and growth, and reduce the time required to reach pediveliger stage, stocking density should start with 6 larvae mL^?1 and be reduced to 2 larvae mL^?1 at 7 PFD.