Alleviation of alternate bearing phenomenon in mango (Mangifera indica L.) trees using boron and nitrogen fertilization

Abstract

This investigation was conducted during two successive seasons (2014/2015) and (2015/2016) using 15?years old productive mango (Mangifera indica) trees cv. Zebda. The trees were grown at AlMalak Valley Farm, El-Sharkeya Governorate- Egypt (30–51° North; 32–53° East). Trees were planted 8?×?8 meter within and between rows in sandy soil under drip irrigation system using the Nile water. The objective of this study is to alleviate alternate bearing in cv. Zebda using mineral nutrients (nitrogen in the on year and boron in the off year). Treatments included three concentrations of nitrogen (1000, 1250, 1500?g/tree/year) and three concentrations of boron (0.0, 250, 500?mg L^?1). Nitrogen was applied to the soil as ammonium sulfate and boron was applied as foliar spray of boric acid. The extra amount of nitrogen fertilizer (250 and 500?g N/tree) was applied at three installments in (May, June and July). Treatment was arranged in a factorial Completely Randomized Block Design with three replicates for each treatment. Results show that the on-year nitrogen fertilization significantly increased mango tree vegetative growth (number of shoot/branch, shoot length, shoot thickness, number of leaves/meter and leaf area) and yield. The average yield in the on year is 85.5?kg/tree at 1250?g N/tree but 67.4?Kilogram/tree at 1000?g N/tree (the control treatment). While in the off year boron foliar application resulted in a significant increase in flowering, initial fruit set, final fruit set and fruit yield. The average yield in the off year is 47?kg/tree at 250?mg L^?1 boron but 9?kg/tree at 0.0?mg L^?1 boron rate (the control treatment).The interaction treatment of 250?mg L^?1 boron + 1500?g nitrogen/tree is the best treatment as it resulted in the highest values for all the tested parameters. The average yield of this treatment is 53.5?kg/tree. This treatment helps alleviate alternate bearing phenomenon by 41% and obtain the highest economic yield in the off-year, i.e. increased yield by 5.9 fold.     

Acidulated activation of phosphate rock enhances release,lateral transport and uptake of phosphorus and trace metals upon direct-soil application

Phosphate rock (PR) was activated via acidulation with HCl, EDTA, and oxalic acid to enhance its reactivity. The release, lateral transport, and uptake of phosphorus (P) along with trace metals from pristine and activated PRs were investigated in a soil micro-block system over a period of 27 days, using wheat (Triticum aestivum L.) plants. Significantly (p < 0.05) higher amounts of available soil P, Fe, Mn, and Zn were released from all the PRs after application to soil within first 9 days of seedling transplantation, while the release of other trace metals (Cd, Co, Cr, Cu, Ni, and Pb) was minimal (<1.2 mg kg^?1). On cumulative basis, APR-O (oxalic acid activated PR) was the most efficient amendment releasing 164% more available P, followed by APR-E (EDTA activated PR) releasing 130% more available P, compared to the pristine PR. Similar results were also observed in the release of available Fe, Mn, Zn, and other trace metals. The highest diffusive mass fluxes for available P, Mn, Fe, and Zn in soil were observed after 3 days of seedling transplantation, which reduced subsequently. The uptake of P, Fe, Mn, and Zn by wheat plants was increased by 394%, 715%, 92%, and 91%, respectively, in APR-O application compared to the pristine PR, while it was increased by 280%, 188%, 16%, and 27%, respectively, in APR-E application compared to the pristine PR. Subsequently, APR-O and APR-E amendments resulted in enhanced shoot lengths, root lengths, shoot dry matter, and root dry matter contents of wheat plants. Hence, it was concluded that activation of PR with oxalic acid and EDTA prior to direct soil application may enhance the reactivity of PR and could serve as a cost-effect fertilization strategy for higher wheat crop production.     

Characterizing Spatial Variability of Soil Textural Fractions and Fractal Parameters Derived from Particle Size Distributions

Soil particle size distribution (PSD) is a fundamental physical property affecting other soil properties. Characterizing spatial variability of soil texture is very important in environmental research. The objectives of this work were: 1) to partition PSD of 75 soil samples, collected from a flat field in the University of Guilan, Iran, into two scaling domains using a piecewise fractal model to evaluate the relationships between fractal dimensions of scaling domains and soil clay, silt, and sand fractions and 2) to assess the potential of fractal parameters as an index used in a geostatistical approach reflecting the spatial variability of soil texture. Features of PSD of soil samples were studied using fractal geometry, and geostatistical techniques were used to characterize the spatial variability of fractal and soil textural parameters. There were two scaling domains for the PSD of soil samples. The fractal dimensions of these two scaling domains (D₁ and D₂) were then used to characterize different ranges of soil particle sizes and their relationships to the soil textural parameters. There was a positive correlation between D₁ and clay content (R² = 0.924), a negative correlation between D₁ and silt content (R² = 0.801), and a negative correlation between D₂ and sand content (R² = 0.913). The geometric mean diameter of soil particles had a negative correlation with D₁ (R² = 0.569) and D₂ (R² = 0.682). Semivariograms of fractal dimensions and soil textural parameters were calculated and the maps of spatial variation of D₁ and D₂ and soil PSD parameters were provided using ordinary kriging. The results showed that there were also spatial correlations between D₁ and D₂ and particle size fractions. According to the semivariogram models and validation parameters, the fractal parameters had powerful spatial structure and could better describe the spatial variability of soil texture.     

Fruit and seed diversity of domesticated carob (Ceratonia siliqua L.) in Morocco

The carob tree (Ceratonia siliqua L.) is an important economic resource for Morocco's rural populations. This species is used in reforestation actions and its cultivation in modern orchards is being undertaken to valorize marginal lands and substitute for drought sensitive species. However, little data is available on its intra-specific variability and its adaptability. Morphological characters of pods and seeds from 13 ecoregions of private-domesticated carob were used to assess phenotypic variation of this species. These stands extend from south-west to north-east and cover a wide range of Morocco's ecoregions. Pods length, width, thickness, seeds number, pulp weight, seeds yield and seeds length, width, thickness and weight were measured for 390 trees (30 trees per ecoregion). Statistically significant differences were found between ecoregions for all characters which were examined, what indicates a high phenotypic diversity. Principal component analysis (PCA) and hierarchical cluster of all ecoregions lead to identify two major and opposite groups (the northern ecoregions; and the central and south-western ecoregions). Ecoregions of the north of Morocco exhibited the largest and the thickest pods with the highest pulp weight while other ecoregions have relatively short pods but largest proportion of seed yield. Similarly, the northern ecoregions are characterized by the heaviest seeds. A correlation matrix between morphological characters, geographic parameters and precipitation exhibits a positive and a negative correlation of pods thickness and pulp weight with the latitude and the altitude, respectively. Seed yield and weight are negatively and positively correlated to pod width, pod thickness and pulp weight, respectively. In addition, seed weight is positively correlated with the latitude. The geographic pattern of the carob tree and its variability are discussed in this paper.     

Identification and validation of cold responsive microRNAs of <Emphasis Type="Italic">Hevea brasiliensis</Emphasis> using high throughput sequencing

Cold stress is one of the major abiotic factors that influence the productivity and geographical distribution of many agriculturally important crops like Hevea brasiliensis. Cultivation of H. brasiliensis in India is being extended to northeastern regions, where low temperature during winter adversely affects its survival, growth, and productivity. Developing cold-tolerant genotypes is a primary requisite to maximize the productivity under such challenging environmental conditions. However, lack of methods for early evaluation of cold tolerance in the newly developed clones and the extensive time required for assessing their tolerance in the field are major constraints for clonal selection. The present study was initiated with an objective to identify and characterize cold stress responsive miRNAs from H. brasiliensis that show stronger association with cold tolerance. Next generation sequencing using Illumina HiSeq method revealed the expression of 21 and 29 conserved miRNA (from clone RRIM 600) families in cold-stressed and control samples, respectively. Forty-two novel miRNAs were identified from this study. Upon differential expression analysis, eight conserved miRNAs were found commonly expressed in both the samples. When expression analyses were performed subsequently with six selected miRNAs in two Hevea clones (viz. RRII 105 and RRIM 600), miR169 showed a strong association with cold tolerance. miRNAs such as miR482 and miR159 also exhibited association with cold tolerance. This study suggests the possibility of employing these miRNAs as markers for cold tolerance after validation in more number of genotypes with varying levels of cold tolerance.     

Determination of Energy Input-Output Analysis in Plum (<Emphasis Type="Italic">Prunus domestica</Emphasis> L.) Production

The aim of this research is to compose the energy input-output analysis of plum in Nevsehir province in Turkey. This research was conducted at the plum cultivating facilities during the 2015–2016 production seasons in Nevsehir province of Central Anatolian Region in Turkey. The agricultural input energies and output energies used in plum cultivation were calculated to determine the energy input-output analysis. According to the research findings, the energy inputs in plum cultivation were calculated respectively 3920?MJ ha^?1 (44.99%) chemical fertilizers energy, 1618.91?MJ ha^?1 (18.58%) diesel fuel energy, 1125.85?MJ ha^?1 (12.92%) chemicals energy, 1069.20?MJ ha^?1 (12.27%) machinery energy, 723.24?MJ ha^?1 (8.30%) human labour energy and 255?MJ ha^?1 (2.93%) irrigation water energy. Production output plum yield were calculated as 12,112.50?MJ ha^?1. The energy output/input ratio, specific energy, energy usage efficiency and net energy calculations were calculated respectively as 1.39, 1.37?MJ kg^?1, 0.73?kg MJ^?1 and 3400.30?MJ ha^?1.     

Phytophagous insect fauna of Onopordum spp. thistles in the south of Syria

Thistles from the genus Onopordum (Asteraceae) are of Mediterranean and Eurasian origin. They are very common in the south of Syria, in particular in Damascus and Al Suwayda, and are found in fallow fields, pastures, roadsides and neglected areas. In 2015–2017, several sites with large populations of Onopordum spp. were identified. Weekly surveys of some of the sites, mainly in the regions of Damascus and Al Suwayda, revealed a significant diversity of phytophagous insect species, some of which had a very high population density. A total of 29 insect species were detected, belonging to four orders and 21 families. The most abundant species were from the order Coleoptera. These were observed to be feeding on different plant parts of Onopordum spp. Purely endophagous species comprised 38% of the species observed on Onopordum spp., ectophagous species comprised 45% with 17% of species mixed ectophagous and endophagous. Species that only fed on Onopordum spp. represented 34% of all the species observed.     

Pantoea: a newly identified causative agent for leaf blight disease in rice

Journal of Plant Diseases and Protection - Leaf blight is one of the most serious threats to rice agroecosystems worldwide, and the yield reduction due to this disease can be as high as 70%. For...     

Toxic Effect of Certain Metals Mixture on Some Physiological and Morphological Characteristics of Freshwater Algae

The toxic effect of multi metals mixture which exist simultaneously in aquatic ecosystem on natural phytoplankton assemblages (green algae, blue-green algae and diatoms) was studied. For this purpose a laboratory scale unit was designed to evaluate the effect of continuous flow metals mixture in forms if triple and penta metals in Nile water algae. Clear changes in algal biomass in terms of chlorophyll a (chl a) took place when subjected to metals combination. The rise or decline in chl a was in relation with other algal pigments (chl b, chl c, carotenoides and phenophytin), protein and carbohydrate content of algal cells. Substantial changes in phytoplankton community structure was detected and the most tolerant group was blue-green algae followed by green algae while diatoms was the most sensitive group. The most dominant species in all cases were blue-green alga Oscillatoria mougeotii and green alga Scenedesmus quadricauda. In addition clear changes in morphological shape was observed for tolerant species belonging to the three algal groups. Nile water algae has ability to remove and accumulate metals in the following order therefore Zn > Cd > Ni > Cu > Cr. In addition, phytoplankton has ability to recovered from the stress of metals when eliminated from the media and the recovered biomass was nearly equivalent to that before exposing to metals stress. The overall effect of metals mixture depending on the type and number of metals, the algal community structure and ratio between different morphological forms of algae (unicellular, colonial and filamentous).     

Phenolic composition of champagnes from Chardonnay and Pinot Noir vintages

Nineteen phenolic compounds including hydroxybenzoic acids, hydroxycinnamic acids, flavonoids, phenolic alcohols, and phenolic aldehydes have been identified and quantified in two monovarietal champagnes, Chardonnay and Pinot Noir, by using a reverse-phase high-performance liquid chromatography (HPLC) system coupled with diode array detection. The identification of four hydroxycinnamic tartaric esters (caftaric, coutaric, fertaric, and 2-S-glutathionylcaftaric acids), two flavanonols (astilbin and engeletin), and some other compounds was confirmed by HPLC coupled with mass spectrometry. Caftaric acid and tyrosol were the major phenols. Hydroxybenzoic acids and flavonoids were present at low concentrations. The phenolic compositions of 2000 and 2001 Chardonnay and Pinot Noir vary quantitatively according to the year and the variety, but the chemical natures of the molecules are the same. The total phenolic content determined by colorimetric measurement ranges from 176 to 195 mg/L of gallic acid equivalent and is similar to that described in white wines.