Black soldier fly and yellow mealworm live larvae for broiler chickens: Effects on bird performance and health status

The commercial broiler chicken strains are the result of successful selection programmes. Most of the problems related to welfare arise from the high growth rate and body weight. The use of environmental enrichments in intensive farming could have a positive effect on birds by increasing animal welfare. The aim of the study was to evaluate the effects of Hermetia illucens (HI) and Tenebrio molitor (TM) live larvae in the diets of broiler chickens on growth performance, carcass yield and health status. A total of 180 four-day-old male broiler chickens (Ross 308) were randomly allotted to 18 pens. Each pen was assigned to one of the three dietary treatments (6 replicates/treatment, 10 birds/replicate) as follows: (i) control diet (C): commercial feed (two feeding phases: starter [4–11 days] and grower [12–38 days]), (ii) HI: C + 5% of the expected daily feed intake (DFI) HI live larvae (calculated on dry matter [DM]) and (iii) TM: C + 5% of DFI TM live larvae (DM). At 39 days of age, birds were slaughtered. Growth performance parameters were overall not affected by dietary treatments, except for the grower phase feed conversion ratio (FCR) and the overall FCR being better in the TM broilers than the others (p < 0.01). No differences were observed for slaughtering performance and haematological and serum parameters, except for the spleen relative weight being higher (p < 0.01) in the birds administered with larvae when compared to the C group. Gut morphometric indexes and histopathological alterations were not influenced by insect larvae administration. In conclusion, the administration in limited quantities of HI and TM live larvae as environmental enrichment has no negative effects on broiler chicken growth performance and health status. A behavioural study could confirm that live insect larvae represent a novel natural environmental enrichment in broiler farming.     

IMAGING DIAGNOSIS—MAGNETIC RESONANCE IMAGING FEATURES OF CRANIOMANDIBULAR OSTEOPATHY IN AN AIREDALE TERRIER

An Airedale Terrier was presented for evaluation of depression and reluctance to be touched on the head. Magnetic resonance (MR) imaging of the head was performed. The images revealed bone lesions affecting the calvarium at the level of the coronal suture and left mandibular ramus, with focal cortical destruction, expansion, and reactive new bone formation. Skull lesions were hypointense on T1‐weighted sequences, hyperintense on T2‐weighted sequences, and showed an intense and homogeneous enhancement after gadolinium administration. Reactive new bone formation and periosteal proliferation were confirmed histopathologically. The clinical signs, imaging findings, and histopathological examination were consistent with craniomandibular osteopathy.     

Sentinel lymph node mapping with computed tomography lymphography for mast cell tumours and a comparison between regional and sentinel lymph node histological status: Sixty-two cases

It is known that the regional lymph node (RLN) may not correspond to the sentinel lymph node (SLN) (the first lymph node draining the tumour), and many diagnostic techniques have recently been aimed at its detection. Although lymphoscintigraphy is the gold standard in both human and veterinary medicine for SLN mapping, it is relatively unavailable in veterinary medicine due to costs and difficult management of the radiotracer. This prospective study evaluated, as a first aim, the feasibility and sensitivity of the computed tomography lymphography (CTL) in detecting the SLN in 62 mast cell tumours (MCTs). The second aim was to evaluate the accuracy of the CTL in identifying the most representative lymph node of the patient's lymphatic status; the histological status of the SNL was compared with that of the RLN, to see in how many cases the patient's stage would have changed according to the RLN. When the RLN turned out to be also the SLN it was decided to excise, as a control LN, the one localised in the neighbourhood of the MCT (neighbouring lymph node; NLN). The detection rate was 90%, with failure of SLN identification in six cases. In 18 (32%) of 56 MCTs with a diagnostic CTL, the SLN did not correspond to the RLN. Forty-five MCTs were surgically removed, together with their corresponding SLN and RLN/NLN. Since the clinical stage of the patient would have changed in only 7% of cases, CTL is a reliable method of detecting the SLN and, for staging purposes, there is no need to remove other LNs.     

Enhancement of alkalinity tolerance in two cucumber genotypes inoculated with an arbuscular mycorrhizal biofertilizer containing Glomus intraradices

The aim of the present study was to determine whether arbuscular mycorrhizal (AM) inoculation with a biofertilizer containing clays as granular carriers, leek root pieces and Glomus intraradices spores could improve alkalinity tolerance of two cucumber genotypes, and to study the changes induced by AM at agronomical and physiological level. A greenhouse experiment was carried out to determine yield, growth, fruit quality, net photosynthesis (A_CO2), electrolyte leakage, and mineral composition of two cucumber (Cucumis sativus L.) genotypes (hybrid “Ekron” or open-pollinated variety “Marketmore”) with inoculated and noninoculated arbuscular mycorrhizal biofertilizer. Plants were supplied with nutrient solutions at two pH values (6.0 or 8.1). The high pH nutrient solution had the same basic composition with an additional 10 mM NaHCO₃ and 0.5 g l⁻¹ CaCO₃. The percentage root colonization was higher in “Marketmore” (21.8%) than “Ekron” (12.7%). Total and marketable yield and total biomass were significantly higher by 189%, 213%, and 77%, respectively, with Ekron in comparison to those recorded with Marketmore. The highest crop performance with Ekron in comparison to Marketmore was due to the improved nutritional status (higher N, P, K, Ca, Mg, Fe, Mn, and B), higher leaf area, and net photosynthesis. Increasing the concentration of NaHCO₃ from 0 to 10 mM in the nutrient solution significantly decreased yield, plant growth, A_CO2, N, P, Fe, Cu, Zn, Mn, and B concentration in leaf tissue, whereas the electrolyte leakage increased. The inoculated plants under alkaline conditions had higher total, marketable yield, and total biomass than noninoculated plant. Mycorrhizal cucumber plants grown under alkaline conditions had a higher macronutrient concentration in leaf tissue compared to noninoculated plants. The highest yield and biomass production in inoculated plants seems to be related to the capacity of maintaining higher net A_CO2 and to a better nutritional status (high P, K, Mg, Fe, Zn, and Mn and low Na accumulation) in response to bicarbonate stress with respect to −AM plants.     

Landscape,Soil, and Plant Analysis of Japanese Stiltgrass (Microstegium vimineum) Invasion in the Piedmont Region,SC

Japanese stiltgrass (Microstegium vimineum), an exotic invasive plant, is native to Southeast Asia. This study was conducted to determine the chemical composition of Japanese stiltgrass as well as soil and landscape characteristics that correlate with invasion of Japanese stiltgrass around Lake Issaqueena in the upper Piedmont of South Carolina. Geographic Information Systems (GISs) and Light Detection and Ranging (LiDAR) were used to determine the spatial pattern of invasion with respect to the aspect, slope, canopy cover, soils, and distance to roads and trails. Japanese stiltgrass was distributed on both sides of Lake Issaqueena in Pacolet and Madison soil map units (Fine, kaolinitic, thermic Typic Kanhapludults) on the average slopes of 21%, but it was particularly common on the eastern shore of the lake in low-lying wet and shaded areas (mean canopy cover 51%). In addition, invasion by Japanese stiltgrass was correlated with the proximity to roads and trails. Plant tissue analysis revealed many differences in the distribution of macronutrients, macrominerals, and micronutrients in the leaves, stems, and roots of Japanese stiltgrass, although those differences were not always statistically significant. Concentrations of nitrogen (N), phosphorus (P), and calcium (Ca) were the highest in leaves while zinc (Zn) concentrations were the highest in stems and concentrations of magnesium (Mg), copper (Cu), manganese (Mn), iron (Fe), and sodium (Na) tended to be higher in roots. Carbon (C), sulfur (S), and potassium (K) concentrations were generally higher in above-ground tissues versus roots. Soil chemical analysis revealed no statistical differences between control and invaded plots. Our findings suggest that watershed areas surrounding lakes may be particularly susceptible to the invasion of Japanese stiltgrass due to their microclimates, low-lying wet pathways for seed distribution and recreational uses.     

Factors Affecting the Growth of Microalgae on Blackwater from Biosolid Dewatering

This paper discusses the possibility of including the culturing of microalgae within a conventional wastewater treatment sequence by growing them on the blackwater (BW) from biosolid dewatering to produce biomass to feed the anaerobic digester. Two photobioreactors were used: a 12 L plexiglas column for indoor, lab-scale tests and a 85 L plexiglas column for outdoor culturing. Microalgae (Chlorella sp. and Scenedesmus sp.) could easily grow on the tested blackwater. The average specific growth rate in indoor and outdoor batch tests was satisfactory, ranging between 0.14 and 0.16 day^?1. During a continuous test performed under outdoor conditions from May to November, in which the off-gas from the combined heat and power unit was used as the CO₂ source, an average biomass production of 50 mgTSS L^?1 day^?1 was obtained. However, statistical analyses confirmed that microalgal growth was affected by environmental conditions (temperature and season) and that it was negatively correlated with the occurrence of nitrification. Finally, the biochemical methane potential of the algal biomass was slightly higher than that from waste sludge (208 mLCH₄ gVS^?1 vs. 190 mLCH₄ gVS^?1).     

Einfluss selektiver mechanischer Fruchtbehangsregulierung auf Ethylensynthese als Stressindikator sowie Ertrag und Fruchtqualität bei Kernobst

The overall objective of this work was to improve fruit quality, break alternate bearing and reduce hand thinning using fewer chemicals in fruit crops. A device was constructed for mechanical thinning, which consisted of three independent horizontal rotors with ropes and freely adjustable angles on a frame, mounted on a front three point hitch and powered by the tractor hydraulics. This can be adapted to any fruit tree trained as spindle, Solaxe, (tall) vertical axis or fruit wall (le mur fruitier) irrespective of rootstock employed. Rotor speed varied from 300 to 460?rpm at either 5 or 7.5?km/h tractor speed. Eight-year-old or twelve-old apple trees cvs. ‘Gala’ and ‘Golden Delicious’ were mechanically thinned in 2007 between pink bud and full bloom (flower bud stages 6–8 or F1–F2) near Bonn, Germany; non-thinned and hand-thinned apple trees of the same block and variety served as control. Mechanically thinned flowering branches showed a similar amount of ethylene efflux (0.4–0.6?ppm C₂H₄/branch) as non-thinned flower branches, preventing potentially unexpected subsequent fruit drop, except for those removed by the rotors. The impact of the horizontal rotors on the branches was from the upper side and removed excessive flowers right to the tree trunk viz. the centre of the tree canopy, where fruits of lesser quality are expected leaving 2–3 flowers per cluster. Leaf damage was less than??10%, even at the fast rotor speed of 420?rpm, which was associated with negligible wood injury. Mechanical thinning induced firmer and sweeter fruit, i.e. tastier apples with longer shelf life, relative to control fruit from non-thinned apple trees. The greatest efficacy in terms of final fruit quality in the grading/sorting was achieved by a rotor speed of 360?rpm at a tractor speed of 5?km/h: Fruit mass increased by up to 20?g and the proportion of fruit larger than 70–75?mm by 10–30% compared with the fruit from non-thinned trees. Mechanical thinning with this newly constructed device led to a 10–20% reduction in yield, but increased returns due to better fruit size and colouration in apple with the potential to overcome alternate bearing.