Modelling interactions amongst people and forest resources at the landscape scale

FLORES, the Forest Land Oriented Resource Envisioning System, is a framework to facilitate quantitative modelling of ecological, economic and social issues at the landscape scale. This issue ofSmall-scale Forest Economics, Management and Policy describes the evolution of FLORES from a concept to a series of models calibrated for diverse locations, and documents the lessons learned. The idea to construct and use landscape-scale models of the forest frontier, based on simulating household decisions and land use at a spatial scale close to the field level, arose from a desire to add rigour to land-use policy research at CIFOR, the Center for International Forestry Research (Vanclay 1995). This simulation modelling approach to addressing interdisciplinary issues, where people are strongly interacting with forest resources, became known as FLORES, the Forest Land Oriented Resource Envisioning System (Vanclay 1998). Muetzelfeldtet al. (1998) constructed a simple prototype of a FLORES model to illustrate the concept and demonstrate the ability of a system-dynamics modelling environment to animate such a model (Muetzelfeldt and Taylor 1997, 2001, Muetzelfeldt and Massheder 2003). In 1999, FLORES became a reality, when 50 scientists from diverse disciplines met in Bukittinggi, Indonesia to construct the first FLORES model styled on this prototype (CIFOR 1999, Vanclayet al. 2003). The research reported in this special issue was made possible by generous financial support from the Department for International Development (UK), the European Community, the Asian Development Bank (under RETA 5812) and the Center for International Forestry Research. The views expressed herein are those of the authors alone. We would like to thank the following people who have assisted in the production of this special issue by acting as anonymous referees for these and other papers: Andy Warner, Brendan Moran, Bruno Verbist, Chris Dake, Chris Legg, Doug Sheil, Euan Mason, Francois Bousquet, Frank Vanclay, Geoff Slaughter, James Gambiza, John Herbohn, John Poulsen, Jungho Suh, Mike Spilsbury, Paul Phillips, Paul van Gardingen, Phil Norman, Philip Nyhus, Roger Wheate, Ross Sigley, Steve Harrison and Tom Evans. Thanks also to the editorial staff, especially Steve Harrison, John Herbohn and Jungho Suh, for making this special issue possible.     

The challenges of effective model scoping: A FLORES case study from the mafungautsi forest margins,Zimbabwe

This paper explores the challenge of defining the scope of a systems model, emphasising three aspects: boundary, granularity and conceptual scope. The significance of these is illustrated by reference to a model of land-use decisions made in villages bordering on the Mafungautsi forest in Zimbabwe. The purpose of this model was to help policy players (Forestry Commission staff, non-governmental organisations, researchers and local people) to understand the impact of policy interventions on local people’s livelihoods. Scoping decisions that were made in building the Mafungautsi model were deliberately liberal, to encompass the interests of all participants in the modelling process. These decisions now present a range of serious challenges: the difficulty of model calibration, the computational expense of running simulations, and the difficulty for new users to understand the model. Facilitators of modelling teams need to consider the serious implications of giving everyone what they want and including all participants’ ideas in a model. In the long run, it may be better to be tough and reject many suggestions at the outset. The former approach is unlikely to lead to a tractable model, while the latter may ultimately offer greater satisfaction for all. We are grateful to the UK’s Department for International Development (DFID) and the European Community for financial support of this project. Thanks also to all of the ACM team who have contributed ideas on the process and content of the modelling work and who make it fun to undertake collaborative research. Thanks also to the participants in the Zimbabwe FLAC workshops for their input into the specification of the Mafungautsi model. Finally thanks to Robert Muetzelfeldt, Jasper Taylor, Jonathan Massheder, Fergus Sinclair and Jerry Vanclay for helping us to ride on the FLORES bandwagon.     

Notes on genus Eurydoxa Filipjev （Lepidoptera： Tortricidae） in China

Genus Eurydoxa Filipjev in China is reviewed and noted for the first time. Based on the present study, two species are recognized, including rhodopa Diakonoff and advena Filipjev. All available information for the species is reviewed and provided.     

Synthesis of 1-hydroxyethyl-2-alkyl-2-imidazoline and its derivative sulfonate amphoteric surfactant from tall oil fatty acid

1-Hydroxyethyl-2-alkyl-2-imidazoline (HEAI) and its derivative sulfonate amphoteric surfactant were synthesized using tall oil fatty acid as the raw material. Suitable experimental conditions for synthesizing the intermediate and final products were probed. Their chemical structures were also investigated by means of infrared spectroscopy and hydrogen nuclear magnetic resonance spectroscopy. Based on the results of these analyses, it has been found that during the reaction process of HEAI with sodium 3-chloro-2-hydroxypropane sulfonate under alkaline condition the imidazoline ring was hydrolyzed to amides, and the obtained amphoteric surfactant was actually a complex mixture of amides. An etherification reaction in the hydroxyethyl group was also observed when the HEAI/sodium 3-chloro-2-hydroxypropane sulfonate molar ratio was more than 1:1.     

Effect of bamboo vinegar on regulation of germination and radicle growth of seed plants

 Two kinds of bamboo vinegar from madake bamboo (Phyllostachys bambusoides) and moso bamboo (Phyllostachys pubescens) were prepared to analyze their components by gas chromatography (GC). The original vinegar, distilled vinegar, ether-extracted vinegar, and three fractions including acidic, neutral, and phenolic fractions separated from ether-extracted vinegar were diluted with distilled water 10² to 10⁷ times. These diluted vinegar solutions were used to investigate the effect of bamboo vinegar on the germination and radicle growth of seed plants. High concentrations of all kinds of treated bamboo vinegars (e.g., 10² of original vinegar and 10³ of ether-extracted vinegar) showed strong inhibition against germination of the seeds. However, an appropriate dilution of bamboo vinegar showed an obvious promotional effect on germination and radicle growth for the four kinds of tested seeds (lettuce, watercress, honewort, chrysanthemum). Received: December, 12, 2001 / Accepted: July 29, 2002 RID="*" ID="*" Part of this paper was presented at the 51st Annual Meeting of the Japan Wood Research Society, Tokyo, April 2001     

Screening method for wood extractives: direct cellulose thin-layer chromatography plate

A method for screening wood extractives was developed using cellulose thin-layer chromatography plate (Cell-TLC) separation and was directly applied to bioassays. Wood meal (60 mesh) from nangka (Artocarpus heterophyllus Lamk) heartwood was extracted with hot methanol. The crude extract was separated using a Cell-TLC plate (50 × 50mm). Two broad bands with R_f values of 0.46 and 0.96 were found, and the bands showed completely different effects against the pest termite Coptotermes formosanus Shiraki and the decay fungus Fomitopsis palustris. The band with R_f 0.46 was preferentially consumed by workers of C. formosanus, and it did not show any growth inhibition against F. palustris when the Cell-TLC plate was directly exposed to the organism. In contrast, the band with R_f 0.96 appeared to repel strongly the feeding by C. formosanus and inhibited the growth of F. palustris. It was concluded that the Cell-TLC system was applicable for screening wood extracts consisting of many compounds.     

Influence of main site factors on Fraxinus mandshurica（Oleaceae） plantation

The investigation was carried out on 10-year-old plantation of Fraxinus mandshurica in Mao‘er Mountain Experimental Station of Northeast Forest University.tree height(H),diameter at breast height(D1.3) and the increment of tree height in 5 years (H5),the thickness of humus layer,as well as the soil moisture were measured for the plantation and the growth indexes(H,D1.3,H5) for different site conditions were analyzed.The results showedthat main site factors influencing the growth of Fraxinus mandshurica were soil moisture,gradient and location of siope in order.The growth of Fraxinus mandshurica was better on the middle-or up-slope site than on the down-slope site.Soil moisture and late frost caused by terrain are the main reasons that limit the growth of Fraxinus mandshurica plantation.     

Effects of thinning on wind damage in Pinus thunbergii plantation ——Based on theoretlcal derlvation of risk—ratios for assessing wind damage

Based on paper of “Theoretical derivation of risk-ratios for assessing wind damage in coastal forest“,wind damage in the pine coasteal forest,which was thinned at four levels in December of 1997,was investigated for four successive growing seasons.Besides wind damage,the wind profiles outside and inside the coastal forest stand and the distributions of optical stratification porosity (OSP) were also observed.Based on these data,risk-ratios of wind damage for both individual trees and stands were estimated according to the methods developed in “Theoretical derivation of risk-ratios for assessing wind damage in a coastal forest“.The results showed that risk-ratios of wind damage,which were calculated from the meen height and diameter only and from the combination of wind and stand sructure profiles,accurately predicted wind damage in the plantation.Relationships between different thinning ratios and incidence of wind damage showed that stand stability decreased soon after the thinning.This was due to the immediate effects of thinning on increasing the canopy roughness and wind load,and on decreasing the sheltering effects from surrounding trees.However,thinning strategies could improve the stability by long-term effects on growthand development of trees against extreme wind.Only canopy damage was recorded during the experimental period,no stem damage was found,even though the maximum 10-min wind speed outside the coastal forest attained 30.2m s^-1.The results obtained in this study indicate that thinning is the most effective silvicultural strategy available for managing coastal forest despite the increased probability of wind damage soon after thinning.     

Effect of tool angles on the chips generated during milling of wood by straight router-bits

 The effect of tool angles on the shapes of chips generated by parallel-to-grain and end-grain milling was explored for China fir and maple under fixed spindle and feed speeds and cutting depth. The milling path was up-milling by straight router-bits with a diameter of 12 mm. The chip shapes could be distinguished as five types: spiral, splinter, flow, thin, and granules or powder. The flow and thin chips were generated most often (on a weight percentage basis) for all tool angles investigated for parallel-to-grain and end-grain milling of China fir and maple. More granule chips were produced with parallel-to-grain milling than with end-grain milling for both woods. The measured chip thickness (t′) was thicker than the calculated thickness (t _max). Thicker and longer maple chips were produced by end-grain milling than by parallel-to-grain milling. The tool geometries of 40°/15° (sharpness of the angle–rake angle), 50°/15°, and 60°/15° for China fir and 40°/25°, 50°/5°, and 60°/5° for maple produced relatively more flow chips with parallel-to-grain milling. Furthermore, the tool geometries of 40°/5°, 50°/15° and 60°/25° produced more flow chips (weight percentage) by end-grain milling of China fir and maple. Received: May 23, 2001 / Accepted: June 28, 2002 Acknowledgment This study was supported by a grant from the National Council of Science, Taiwan (NSC89-2313-B-415-011).     

Structural characteristics of cell walls of kenaf (<Emphasis Type="Italic">Hibiscus cannabinus </Emphasis>L.) and fixation of carbon dioxide

 Kenaf (Hibiscus cannabinus) plants are widely known for their contribution to the global and regional environment because of their ability to fix CO₂. On the other hand, some scientists have doubts about CO₂ fixation by kenaf and have misgivings about the effect of kenaf on the ecosystem. We have characterized the structural characteristics of cell walls of bast fibers, cores, roots, and leaves of kenaf during the maturation of plants and investigated the rate of photosynthesis. During maturation of the kenaf plant the cellulose (bast fiber 52–59%, core 44–46%) and lignin (bast fiber 9.3–13.2%, core 18.3–23.2%) contents increased significantly. The aromatic composition of the lignin of bast fiber was significantly different from that of the core lignin and of other plants. The lignin of bast fiber appears similar to pure syringyl lignin. Fixation of CO₂ by kenaf plants and their contribution to the global environment are discussed. A significatly high rate of photosynthesis of kenaf plants was observed compared to that of woody plants in Japan, but the amount of CO₂ fixation depends on the characteristics of the plantation. If the kenaf was planted in high density, about twice as much CO₂ was fixed as was fixed by trees in a tropical rain forest. Received: April 22, 2002 / Accepted: July 24, 2002 Acknowledgments This project was supported by the Science and Technology Agency (STA) fellowship of the Japan International Science and Technology Exchange Center (JISTEC), which has been successfully applied by Dr. Shuji Hosoya, Forestry and Forest Products Research Institute. We thank Dr. Toshio Sumizono and Mr. Masao Sakurai, Forestry and Forest Products Research Institute, for their kind help in determining the rate of photosynthesis and cultivating the kenaf plants, respectively. We also express our appreciation to Dr. Quang Hung Le, College of Agriculture and Forestry, Ho Chi Minh City, Vietnam for offering information about the cultivation of kenaf at Thu Duc District, Ho Chi Minh City.