Bacterial diversity and occurrence of ammonia-oxidizing bacteria in the Atacama Desert soil during a “desert bloom” event

The Atacama Desert, located in northern Chile, is one of the driest deserts on the Earth. However, in some years, short and sporadic rainfall in the southern end of this desert has increased the soil moisture that produces ephemeral “desert bloom”. Our goal was to assess the composition of the bacterial community and determine variations in the ammonia-oxidizing bacteria guild diversity from soils collected during the course of the “desert bloom” event. The bacterial composition from this arid soil was determined by cloning and sequencing the 16S rRNA gene. A relatively high diversity of clones belonging to 14 bacterial groups was detected. The ammonia-oxidizers showed a significantly higher diversity of amoA gene clones after the “desert bloom” than during or at the beginning of this event. All sequences obtained were related to Nitrosospira genera and environmental clones. These results suggest that the diversity of ammonia-oxidizing bacteria in this arid soil can be affected by the occurrence of “desert bloom”.     

Effects of mulching on soil physical properties and runoff under semi-arid conditions in southern Spain

Application of crop residues to soil and reduced or no tillage are current management practices in order to achieve better water management, increase soil fertility, crop production and soil erosion control. This study was carried out to quantify the effect of wheat straw mulching in a no tilled Fluvisol under semi-arid conditions in SW Spain and to determine the optimum rate in terms of cost and soil protection. After a 3-years experiment, mulching application significantly improved physical and chemical properties of the studied soil with respect to control, and the intensity of changes was related to mulching rate. The organic matter content was generally increased, although no benefit was found beyond 10 Mg ha⁻¹ year⁻¹. Bulk density, porosity and aggregate stability were also improved with increasing mulching rates, which confirmed the interactions of these properties. Low mulching rates did not have a significant effect on water properties with respect to control, although the available water capacity increased greatly under high mulching rates. After simulated rainfall experiments (65 mm h⁻¹ intensity), it was found that the mulch layer contributed to increase the roughness and the interception of raindrops, delaying runoff generation and enhancing the infiltration of rain water during storms. Mulching contributed to a reduction in runoff generation and soil losses compared to bare soil, and negligible runoff flow or sediment yield were determined under just 5 Mg ha⁻¹ year⁻¹ mulching rate. It was observed that during simulations, the erosive response quickly decreases with time after prolonged storms (30 min) due to the exhaustion of available erodible particles. These results suggest that the erosive consequences of intermediate intensity 5-years-recurrent storms in the studied area could be strongly diminished by using just 5 Mg ha⁻¹ year⁻¹ mulching rates.     

Effect of fire severity on water repellency and aggregate stability on Mexican volcanic soils

A field study was conducted in order to study the effects of different wildfire severities on [1] soil organic matter content, [2] soil water repellency, and [3] aggregate stability; [4] the distribution of soil water repellency in aggregate sieve fractions (1–2, 0.5–1, 0.25–0.5 and < 0.25 mm) was also studied. Five similar burned sites and two long-unburned control sites were selected under mixed fir and pine forests in volcanic highlands from Michoacán, Mexico. Soil water repellency was observed in soil samples from all sites, although changes were influenced by fire severity. Sites affected by low severity fires did not show important changes in burned soils in comparison with controls, while high severity fires caused different responses: water repellency was increased or destroyed probably due to temperatures below or above 200–250 °C during burning. The degree of wettability/repellency from the fine earth fraction of burned soils seems to be conditioned by < 0.5 mm aggregates, more than coarser aggregates which always showed a higher degree of wettability. It is suggested that destruction of organic matter during burning occurs principally in coarse aggregates, where combustion can be more intense. Aggregate stability (measured using pre-wetted aggregates between 4 and 4.8 mm) did not change under low severity burning but it was considerably reduced in the case of a high fire severity. Losses of organic matter and destruction of water repellency seem to be the reasons for that reduction in this type of soil in contrast to previous studies, where aggregate stability increased after burning. Changes in both properties (water repellency and aggregate stability) are expected to induce modifications in runoff and soil loss rates at the hillslope scale.     

Removal of Silver and Lead Ions from Water Wastes Using Azolla filiculoides, an Aquatic Plant, Which Adsorbs and Reduces the Ions into the Corresponding Metallic Nanoparticles Under Microwave Radiation in 5?min

Pollution of water bodies with heavy metal ions is a major worldwide environmental problem. The objective of this study was to elucidate the mechanism in which metallic ions are adsorbed and reduced to metallic nanoparticles onto plant materials using microwave radiation. In this research, we have fabricated metallic silver and lead nanoparticles from their corresponding ions using the aquatic plants Azolla filiculoides and Pistia stratiotes (since identical results are obtained for both plants, the emphasis will be on the Azolla) under microwave radiation. Our data show that metallic silver and metallic lead nanoparticles were completely removed from the polluted solution and were embedded in the A. filiculoides surface after 5 min of microwave reaction. It was also found that, for both metals, reduction of the metallic ions was accomplished by the plant matrix without the need of an external reducing agent. Most of the particles had a spherical shape within the 10?C50 nm size range. Mass balance data clearly indicate that most of the silver particles were found on the surface of the plant and not in the clean water. Pectin and ??-glucuronic acid did not reduce the silver or lead ions under microwave radiation. We therefore hypothesize that perhaps the proteins or sugar alcohols in the plant matrix were serving as the reducing agents. We believe that this technique in which adsorption and reduction are combined using microwave radiation can be applied for removing and recycling metallic ions from contaminated water and industrial wastewater.     

Metabolic acidosis in healthy mules under general anaesthesia with halothane

ObjectiveTo report the severe metabolic acidosis identified in a group of 11 healthy mules anaesthetized with halothane for castration.Study designData generated from a prospective study.AnimalsEleven mules aged 2.5–8 years, weighing 230–315 kg and 11 horses aged 1.5–3.5 years, weighing 315–480 kg.MethodsAnimals were anaesthetized for castration as part of an electroencephalographic study. Preanaesthetic medication was acepromazine (0.03 mg kg^?1) administered through a preplaced jugular venous catheter. Anaesthesia was induced 30–90 minutes later with intravenous thiopental (10 mg kg^?1). After orotracheal intubation, anaesthesia was maintained with halothane vaporised in oxygen. The animals’ lungs were ventilated to maintain the end-tidal CO₂ concentration between 3.9 and 4.5 kPa (29–34 mmHg). Anaesthetic monitoring included invasive blood pressure measurement via the auricular artery (mules) and submandibular branch of the facial artery (horses). Arterial blood gas samples were drawn from these catheters at three time points during surgery and pH, PaCO₂, base excess (ecf) and HCO₃^? were measured. Values were compared between groups using a Mann–Whitney test. p was taken as <0.05. Results are reported as median (range).ResultsPaCO₂ did not differ between groups but pH was significantly lower in mules [7.178 (7.00–7.29)] compared to horses [7.367 (7.24–7.43)] (p = 0.0002). HCO₃^? values were significantly lower in the mules [16.6 (13.0–22.3) mM] compared to horses [23.7 (20.9–23.7) mM] (p = 0.0001), whilst base excess (ecf) was significantly more negative in the mules [?11.4 (?1.27 to ?16) mM] compared to horses [?1.3 (?5.8 to +2.4) mM] (p = 0.0004).Conclusion and clinical relevanceThis study demonstrated severe metabolic acidosis in healthy mules, which may have prompted intervention with drug therapies in a clinical arena. It is probable that the acidosis existed prior to anaesthesia and caused by diet, but other possible causes are considered.     

Post-operative analgesic effects of butorphanol or firocoxib administered to dogs undergoing elective ovariohysterectomy

ObjectiveTo compare the post-operative analgesic effects of butorphanol or firocoxib in dogs undergoing ovariohysterectomy.Study designProspective, randomized, blinded, clinical trial.AnimalsTwenty-five dogs >1 year of age.MethodsDogs received acepromazine intramuscularly (IM), 0.05 mg kg^?1 and either butorphanol IM, 0.2 mg kg^?1 (BG, n = 12) or firocoxib orally (PO), 5 mg kg^?1 (FG, n = 13), approximately 30 minutes before induction of anesthesia with propofol. Anesthesia was maintained with isoflurane. Ovariohysterectomy was performed by the same surgeon. Pain scores using the dynamic and interactive visual analog scale (DIVAS) were performed before and at 1, 2, 3, 4, 6, 8 and 20 hours after the end of surgery by one observer, blinded to the treatment. Rescue analgesia was provided with morphine (0.5 mg kg^?1) IM and firocoxib, 5 mg kg^?1 (BG only) PO if DIVAS > 50. Groups were compared using paired t-tests and Fisher’s exact test (p < 0.05). Data are presented as mean ± SD.ResultsThe BG required significantly less propofol (BG: 2.6 ± 0.59 mg kg^?1; FG: 5.39 ± 0.7 mg kg^?1) (p < 0.05) but the anesthesia time was longer (BG: 14 ± 6, FG: 10 ± 4 minutes). There were no differences for body weight (BG: 7.9 ± 5.0, FG: 11.5 ± 4.6 kg), sedation scores, and surgery and extubation times (BG: 10 ± 2, 8 ± 5 minutes; FG: 9 ± 3, 8 ± 4 minutes, respectively) (p > 0.05). The FG had significantly lower pain scores than the BG at 1, 2 and 3 hours following surgery (p < 0.05). Rescue analgesia was administered to 11/12 (92%) and 2/13 (15%) dogs in the BG and FG, respectively (p < 0.05).Conclusion and clinical relevanceFirocoxib produced better post-operative analgesia than butorphanol. Firocoxib may be used as part of a multimodal analgesia protocol but may not be effective as a sole analgesic.     

Evaluation of Modified Amaranth Starch as Shell Material for Encapsulation of Probiotics

The objective of this study was to develop with thermoplastic extrusion amaranth starch derivatives and to characterize and evaluate their functionality as encapsulating agents of Bifidobacterium breve ATCC 15700 and Lactobacillus casei ATCC 334 during spray drying. The survival of both probiotics during storage at different water activities and at two storage temperatures, their viability in a food model system, and their tolerance to a simulated gastrointestinal tract were determined. Native amaranth starch was chemically modified to obtain phosphorylated, acetylated, and succinylated starch. Starch derivatives were reduced in viscosity, and the solubility in water was increased. In general, the modified amaranth starches and control corn starch did not provide good protection to both probiotics during storage at 25°C. However, there was excellent viability during storage at 4°C for both probiotics. Microcapsules showed a uniform coverage of the cells. Storage for 35 days at 25°C of blends of oat with succinylated amaranth microcapsules with probiotics had a lower reduction. Also, this succinylated amaranth starch containing probiotics showed a higher resistance to simulated gastrointestinal conditions. The results with food model systems supported the applicability of the modified starches.     

Technological Properties of Biodegradable Films Produced with Myofibrillar Proteins Extracted from Gilded cat-fish (Brachyplatystoma rousseauxii) Carcasses and Parings

ABSTRACT

This paper aimed to investigate whether the type of fish residue used for extraction of myofibrillar proteins (MP) impacts the technological properties of biodegradable films. The MPs were extracted from two types of Gilded cat-fish (Brachyplatystoma rousseauxii) residues: (1) carcass with muscle attached from the production of mechanically separated meat (MSM) and (2) parings from fillet trimming (PAR). The percentage composition and color of the MPs from MSM (P-MSM) and parings (P-PAR) significantly differed, mainly regarding the ash and lipid contents. The presence of these non-protein compounds in P-MSM led to the formation of films with inferior technological and thermal properties, which indicates the type of residue used impacted the film properties.     

Haloarchaea as Cell Factories to Produce Bioplastics

Plastic pollution is a worldwide concern causing the death of animals (mainly aquatic fauna) and environmental deterioration. Plastic recycling is, in most cases, difficult or even impossible. For this reason, new research lines are emerging to identify highly biodegradable bioplastics or plastic formulations that are more environmentally friendly than current ones. In this context, microbes, capable of synthesizing bioplastics, were revealed to be good models to design strategies in which microorganisms can be used as cell factories. Recently, special interest has been paid to haloarchaea due to the capability of some species to produce significant concentrations of polyhydroxyalkanoate (PHA), polyhydroxybutyrate (PHB), and polyhydroxyvalerate (PHV) when growing under a specific nutritional status. The growth of those microorganisms at the pilot or industrial scale offers several advantages compared to that of other microbes that are bioplastic producers. This review summarizes the state of the art of bioplastic production and the most recent findings regarding the production of bioplastics by halophilic microorganisms with special emphasis on haloarchaea. Some protocols to produce/analyze bioplastics are highlighted here to shed light on the potential use of haloarchaea at the industrial scale to produce valuable products, thus minimizing environmental pollution by plastics made from petroleum.