Determining optimal primary sawing and ripping machine settings in the wood manufacturing chain

for wood manufacturers around the world, the single biggest cost factor is known to be its raw material. Maximum volume recovery of this raw material is, therefore, of key importance for the industry. The wood products industry consists of several interrelated manufacturing steps for converting trees into logs and logs into finished lumber. Each operation usually optimises its functionality in isolation from the preceding and following operations. It is a well documented fact that the optimisation of decisions through the whole chain of operations is considerably more profitable than the optimisation of individual operations. The objective of this study was to determine the optimal machine settings for two interrelated operations, namely the sawing and ripping operations which have tradition? ally been optimised individually. A model, having two decision variables, was developed which aims to satisfy market demand at a minimal cost. The first decision was how to saw the log supply into different thicknesses by choosing specific sawing patterns. The second was to decide on a rip saw's priority value settings, which determines how the products from the primary sawing operation are ripped into products of a certain thickness and width. The techniques used to determine the machine settings included static simulation with the SIMSAW software to represent the sawing operation and mixed integer programming to model the ripping operation. A metaheuristic, namely the Population Based Incremental Learning algorithm, was used to link the simulation and mixed integer models and to determine the optimal settings for the combined process. The model's objective function was to minimise the cost of production. This cost included the raw material waste cost and the over or under production cost. The over production cost included the stock keeping costs and the under production cost was estimated as the buy?in cost of under supplied products from another wood supplier. The model performed well against current decision software available, namely the Sawmill Production Planning System package, which combines simulation and mixed integer programming techniques to maximise profit. The model added further value by modelling and determining the ripping priority settings in addition to the primary sawing patterns.     

Field evaluation of a mixture of albendazole sulphoxide and levamisole against Ostertagia and Trichostrongylus spp in sheep

The efficacy of a mixture of albendazole sulphoxide and levamisole, 3.6 and 8.25 mg/kg respectively, at single and double dose rates, was compared with the recommended dose rate of each anthelmintic alone. The comparison was conducted on groups of 6 to 14-week-old lambs on 22 farms, 16 of which had evidence of multiple resistance to benzimidazole and levamisole. A single dose of the mixture reduced mean egg counts by 95% on half the farms with multiple resistance and on all the remaining farms. Consequently, the mixture should be included in an assessment of effective anthelmintics on farms to determine its value for nematode control. A double dose rate of mixture was effective on all but 4 farms. Reductions caused by the mixture were due to the additive actions of the drugs on 18 of 22 farms; synergistic action was noted on only 3 farms. It was concluded that the mixture of albendazole sulphoxide and levamisole offered many farmers an effective anthelmintic for use in preventive control programs. Recommendations for such programs include annual rotation of effective anthelmintics as a means of delaying selection for drug resistance.     

The role of procaine in adverse reactions to procaine penicillin in horses

Procaine penicillin is a commonly used antibiotic in equine medicine but its use is associated with a substantial incidence of adverse reactions. Soluble procaine concentrations were determined by HPLC in several commercially available procaine penicillin preparations, including some that were involved in adverse reactions. The mean (+/- SEM) soluble procaine concentrations in the veterinary preparations was 20.18 +/- 5.07 mg/ml, which was higher than the concentration in the only procaine penicillin preparation for use in humans in Australia of 7.3 mg/ml. Heating the veterinary procaine penicillin preparations to 50 degrees C for 1 day led to a significant (P less than 0.01) increase in the amount of soluble procaine. Heating to 50 degrees C for 7 days also produced a significant (P less than 0.02) increase. Soluble procaine tended to return to baseline concentrations when veterinary procaine penicillin preparations were heated to 50 degrees C for 2 days then stored for 7 days at room temperature. Administration of procaine HCl intravenously (IV) at 2, 5, and 10 mg/kg produced behavioural, locomotor and vascular reactions, which were clinically similar to those reported in adverse reactions to procaine penicillin. The more severe reactions occurred at higher doses, although different horses responded variably at the same dose. Some adverse reactions lead to recumbency but none were fatal. The blood procaine concentrations 1 min after IV administration averaged 19.0 +/- 12.6 and 25.3 +/- 16 micrograms/ml at 2.5 mg/kg and 5 mg/kg, respectively. Ten min after administration, blood procaine concentrations were significantly higher (P less than 0.001) in the 5 mg/kg group than in the 2.5 mg/kg group. Intramuscular (IM) procaine HCl at 5 mg/kg produced significantly lower (P less than 0.001) blood concentrations than similar IV doses, and, in contrast to the IV doses, the amount of procaine in the blood was significantly higher 5 and 10 min after administration than it was after 1 min. Mild excitatory reactions in 4/5 horses were noted 5 to 10 min after IM administration. Administration of diazepam 20 s before procaine HCl prevented the excitatory adverse reaction in 2/2 horses, but administration after the procaine did not influence the outcome.     

Occurrence of organochlorine residues in Australian meat

In spite of several quality control procedures used by Australia to ensure the wholesomeness of export meat, a number of pesticide residue violations were identified in the Australian product exported to the USA in May 1987. The pesticides involved were the organochlorines, dieldrin and heptachlor. The problems were caused by the persistence of organochlorines in soils and their illicit use or contamination of storage facilities. Animals grazing contaminated pasture, ingesting contaminated feed or held in contaminated yards over a period, bioaccumulated residues in their adipose tissues which eventually exceeded maximum residue limits (MRL) and caused violations. Though there was no immediate public health risk, the Australian Quarantine and Inspection Service (AQIS) of the Commonwealth Department of Primary Industries and Energy (DPIE), acted expeditiously to determine and eliminate the factors causing these problems, which threatened Australia's beef export industry worth in excess of two billion dollars annually. An overall strategic plan, "The Integrated Action Plan", was formulated and implemented by AQIS with the assistance of the relevant Departments of the States and the Northern Territory (NT), meat processing and export industries and livestock producer bodies. As a result of this action, the likely sources of contamination were identified and controlled. The National Residue Survey (NRS) was enhanced, a National Residue Data Base (NRDB) was established and a centralised computer system interactive with abattoirs, laboratories and animal health authorities developed. The cattle farm identity tail tag system already in place, capable of tracing cattle to the farm of origin was refined and trace back systems for sheep and pigs were utilised.(ABSTRACT TRUNCATED AT 250 WORDS)     

Cambrian burgess shale animals replicated in clay minerals

Although the evolutionary importance of the Burgess Shale is universally acknowledged, there is disagreement on the mode of preservation of the fossils after burial. Elemental mapping demonstrates that the relative abundance of elements varies between different anatomical features of the specimens. These differences reflect the compositions of the minerals that replicated the decaying organism, which were controlled by contrasts in tissue chemistry. Delicate morphological details are replicated in the elemental maps, showing that authigenic mineralization was fundamental to preserving these fossils, even though some organic remains are also present.     

Continental drainage in north america during the phanerozoic from Nd isotopes

Neodymium (Nd) isotopic data show consistent patterns in the sources of sedimentary rocks in North America at a continental scale. Between 600 and 450 million years ago (Ma), ancient continental shield sources dominated. Around 450 Ma, detritus from the Caledonian-Appalachian mountains overwhelmed sediment from all older sources, and is documented over large areas of the southern, western, and northern margins of North America. This material continued to dominate the sediment supply until about 150 Ma, probably due to cannibalistic recycling of sedimentary rocks formed earlier. Around 150 Ma, the rising western Cordillera delivered new and different detritus to the sedimentary system.