Extraction of rice-planting area and identification of chilling damage by remote sensing technology: a case study of the emerging rice production region in high latitude

Rice is the second largest staple crop in the world and therefore plays an important role in food security. As a thermophilic crop, rice is sensitive to temperature changes. Thus, research on the chilling damage of rice is essential. The Sanjiang Plain is an emerging rice production area and is located at high latitudes in China, the world’s largest rice-producing country. Landsat data were used to extract rice-planting area from 1985 to 2015. MODIS 13Q1, which was uniformly distributed during the growing period of rice, was used to obtain NDVI values of paddies during 2002–2015. Dynamic Identification Index of sterile-type chilling damage and monitoring standard of delayed-type chilling damage were the proposed methods used in this paper, which were used to judge the chilling damage of rice. The results show that in the study region, the rice-planting area in 2015 is nearly 12 times larger than that in 1985. Delayed-type chilling damage occurred in 2002 and 2009, while sterile-type chilling damage occurred in 2005, 2006, 2009, 2010, 2014, and 2015. Comparing with the prevalent meteorological standards, the results indicate that the index and standards proposed in this paper are precise, applicable, and more sensitive than them. The method is a macroscopic and accurate method to identify chilling damage in rice and can also provide a scientific basis to ensuring the stability of rice yield.     

Investigating the reduction of sodium adsorption ratio from agricultural waste by rice husk in batch scale and physical model of drain envelop

Sodium adsorption ratio (SAR) is one of the water quality indexes that whose is important due to reuse or depletion to environment. Solutes in drain water can be controlled by adsorption, chemical or biological reaction, organic envelope of drainage. Rice husk is the common option of drainage envelops in paddy fields. In this study, the ability of reduction of SAR by rice husk was evaluated in batch scale and physical model of drain envelops. In the batch experiments, the adsorption of SAR parameters was investigated by adding 2 g of rice husk into a 100 ml of sodium chloride solution. The results indicated that rice husk absorbed calcium, magnesium and sodium, respectively. By increasing the temperature, contact time and pH, adsorption of calcium, magnesium and sodium was increased; however, the higher concentration of sodium in soil solution reduced the percentage of adsorption. In a more realistic state, physical models of subsurface drainage in the paddy fields were made. Drainage envelope treatments included of rice husk (H), combination of 20 and 60 % of husk with gravel (H₂₀G₈₀ and H₆₀G₄₀) and a pipe without envelope (NE). Due to higher drain discharge and more sodium removal (lower SAR in drain water), treatment H with the discharge of 16.2 ml/min and SAR of 1.27 (meq/l)^0.5 was better in comparison with other treatments.     

High water content silk protein-based hydrogels with tunable elasticity fabricated via a Ru(II) mediated photochemical cross-linking method

Silk is very promising in the field of biomaterials as a natural biomacromolecule. Silk protein can be made into various forms of materials, including hydrogels. However, silk protein-based hydrogels have not attracted much attention due to its weak mechanical properties. Here, we report high water content silk protein-based hydrogels with tunable elasticity which were fabricated through Ru(II) mediated photochemically cross-linking tyrosine residues in regenerated silk protein. The regenerated silk protein was characterized by Fourier transform infrared spectroscopy (FTIR). The gelation kinetics of the silk protein was studied by rheology measurements. The compressive mechanical properties of the silk protein-based hydrogels was investigated using compressive tests and dynamic mechanical analysis (DMA). Compressive modulus of the hydrogels reached 349±64 MPa at 15 % strain. The fabricated silk protein-based hydrogels were also characterized by Scanning electron microscopy (SEM), revealing an interconnected porous network structure, typical of hydrogels, with an average pore size of approximately 130 μm. Finally, biocompatibility of the silk protein-based hydrogels was demonstrated through cell culture studies using a human fibroblast cell line, HFL1. The reported silk protein-based hydrogels represent a promising candidate for biomaterial applications.     

How Long can Rogued Potato Plants Left in the Field Be a Source of <Emphasis Type="Italic">Potato Virus Y</Emphasis> for Aphids?

Removal of diseased plants (roguing) is commonly practiced in seed potato production. Diseased plants left to desiccate in fields could possibly serve as sources of Potato virus Y (PVY). PVY acquisition by three aphid species (Myzus persicae, Rhopalosiphum padi, Aphis fabae) was evaluated with leaflets from rogued plants for seven days. Results showed greater PVY acquisition rates in non-colonizing aphids species compared to colonizing ones. The proportion of aphids leaving leaflets increased with time (i.e. days after plants were uprooted) and some aphids were carrying PVY in their stylets on each of the seven days of the experiment, suggesting that aphids were able to probe and acquire PVY even when plants wilted. These results confirmed that diseased plants left in fields can serve as a source of PVY for aphids even after they wilted and emphasises that proper actions must be taken to efficiently remove diseased plants from fields.     

Effectiveness of Combined Use of Mineral Oil and Insecticide Spray in Reducing <Emphasis Type="Italic">Potato Virus Y</Emphasis> (PVY) Spread under Field Conditions in New Brunswick,Canada

In the 2014 and 2015 crop seasons, the efficacies of different types, rates and combinations of mineral oil and insecticide foliar sprays for reducing Potato virus Y (PVY) spread were tested in controlled field trials in New Brunswick (NB), Canada. Experimental plots were planted with certified PVY-free Goldrush, supplemented with known virus-infected seed to raise PVY inoculum to 2.3% and 3% at the beginning of the 2014 and 2015 seasons, respectively. Treatments consisted of mineral oil-only sprays at different application rates, insecticide-only sprays of differing numbers, and several combined mineral oil and insecticide spray regimes, all compared to a no-spray control treatment. PVY spread to 18% (2014) and 22% (2015) of initially virus-free plants in no-spray control plots, with significant reductions observed in PVY spread in several treatments. Greatest PVY reductions, as low as 4% (2014) and 12% (2015), were in combined mineral oil and insecticide spray treatments, followed by oil-only sprays; while insecticide-only sprays did not significantly reduce PVY spread. As well as measuring PVY spread to marked test plants and randomly collected post-harvest tuber sample from the plots, exhibited similar treatment pattern for PVY incidence. Multiple logistic regression modeling confirmed the relative efficacy of combined oil and insecticide sprays for reducing PVY spread, while accounting for variable inoculum and aphid factors. Modeling also highlighted the importance of planting low-PVY seed initially, and of early application of foliar sprays. Local best management practice recommendations for reduction of in-field PVY spread were discussed.     

Drape simulation of three-dimensional virtual garment enabling fabric properties

This study analyzes how the silhouette of virtual garments applied to virtual avatars is altered according to various virtual fabric properties. This study measures the properties of real fabrics that include a charmeuse (#F1) and gabardine (#F2) using the Fabric Analysis by Simple Testing system; in addition, the material properties of different real fabrics were applied to that of the virtual fabric. It then evaluates the drape stiffness and silhouette of the virtual garments according to the different fabrics. This study also compared the virtual garment silhouette of sample fabric #F1-S that changed only the stretch property of the sample fabric #F1 with the virtual garment silhouette of sample fabric #F1. The results show that the fabric properties including bend, thickness, weight, stretch, shear values affect the drape stiffness, silhouette, and fit of the virtual garment simulated on virtual avatars and may be used for the realistic virtual garment technology.     

Investigation of jute-lignin-poly (3-hydroxybutyrate) hybrid biodegradable composites with low water absorption

This study developed a novel PHB-lignin-jute biodegradable composite with preferable mechanical properties and low water absorption. The appearances of fracture surface of composites were analyzed by scanning electron microscope. The result suggested a Gaussian-like distribution of the size particles supporting the presence of lignin with a radius smaller than 0.5 μm. According to X-ray diffraction, the presence of lignin and jute fibers was decreased the crystallization of PHB. Moreover, the glass transition temperature of PHB increased, and the endotherm during glass transition was decreased. The maximum tensile strength and modulus of composites were obtained with 30 wt% jute fiber contents and 4 wt% lignin contents. The presence of jute fibers was largely increased the water absorption of composites. However, the presence of lignin was effectively decreased the water absorption of composites at saturation levels.     

Effect of soil sealing on the microbial biomass,N transformation and related enzyme activities at various depths of soils in urban area of Beijing,China

Purpose  

Sealing of soils prevents the exchange of gas, water and nutrient between soil and other environmental compartments, and affects urban N flux, thereby resulting in certain negative impacts on soil functioning and urban environment. However, little information is available on the biogeochemical cycling and biological activities after sealing of soils in urban areas. The aim of this study was to assess the effects of soil sealing on N transformation and associated microbial properties.     

Quantifying soil macropore networks in different forest communities using industrial computed tomography in a mountainous area of North China

Purpose

Macropores have important effects on the movement of soil water, air, and chemical substances. However, the quantitative relationship between complex 3D soil macropore networks and forest communities remains unclear in the northern mountainous area in China. The objectives of this study were to (1) use industrial computed tomography (CT) scanning and image analysis to quantitatively analyze macropore networks in intact soil columns and (2) identify characteristics of soil macropore networks in different forest communities.

Materials and methods

Intact soil columns (100-mm diameter, 300 mm long) were taken from six local forest communities with three replicates for a total of 18 samples. Industrial X-ray CT was used to scan soil samples; then, the scanned images were used to obtain the 3D images of rock fragments and macropore structures. Next, the macropore structure was quantified, including volume, diameter, surface area, length, angle, tortuosity, and number of macropores. This technique provided an accurate method to quantify the structure of macropores.

Results and discussion

The analysis and results revealed that different forest communities influence soil macropore 3D structure significantly and in different ways. Macropores in mixed Pinus tabulaeformis, Castanea mollissima, and Ulmus pumila forest had the largest diameter, surface area, network density, and length density of macropores as well as the smallest mean tortuosity of soil macropores. This is caused by the fact that mixed forest soils had more complex root systems, better soil structure, and more biotic activity. Within the soils of a single forest community, macropore porosity, network density, surface area density, and length of macropores decreased with increased soil depth, because more roots and more biological activity were present in the surface soil.

Conclusions

Advanced industrial CT technology can allow an accurate quantification of soil macropore structure. This is important because this type of structure has significant effects on soil water, air, and chemical transport. The results suggest that mixed forest is the best afforestation model in the northern mountainous area in China because of its ability to improve soil structure.