Biodegradation and mineralization of metolachlor and alachlor by Candida xestobii

Metolachlor (2-chloro-6'-ethyl-N-(2-methoxy-1-methylethyl)aceto-o-toluidide) is a pre-emergent chloroacetanilide herbicide used to control broadleaf and annual grassy weeds in a variety of crops. The S enantiomer, S-metolachlor, is the most effective form for weed control. Although the degradation of metolachlor in soils is thought to occur primarily by microbial activity, little is known about the microorganisms that carry out this process and the mechanisms by which this occurs. This study examined a silty-clay soil (a Luvisol) from Spain, with 10 and 2 year histories of metolachlor and S-metolachlor applications, respectively, for microorganisms that had the ability to degrade this herbicide. Tis paper reports the isolation and characterization of pure cultures of Candida xestobii and Bacillus simplex that have the ability to use metolachlor as a sole source of carbon for growth. Species assignment was confirmed by morphological and biochemical criteria and by sequence analysis of 18S and 16S rRNA, respectively. High-performance liquid chromatography (HPLC) and liquid chromatography-mass spectrometry (LC-MS) analyses indicated that C. xestobii degraded 60% of the added metolachlor after 4 days of growth and converted up to 25% of the compound into CO(2) after 10 days. In contrast, B. simplex biodegraded 30% of metolachlor following 5 days of growth in minimal medium. In contrast, moreover, the yeast degraded other acetanilide compounds and 80% of acetochlor (2-chloro-N-ethoxymethyl-6'-ethylaceto-o-toluidide) and alachlor (2-chloro-2',6'-diethyl-N-methoxymethylacetanilide) were degraded after 15 and 41 h of growth, respectively. The results of these studies indicate that microorganisms comprising two main branches of the tree of life have acquired the ability to degrade the same novel chlorinated herbicide that has been recently added to the biosphere.     

Milk and serum progesterone levels in mares after ovulation

Twenty-four Finnhorse mares were examined by rectal palpation and ultrasonography every 6 h during late oestrus to determine the time of ovulation. Milk and serum samples were collected every 6 h after the detected ovulation for progesterone analysis. The progesterone rises took place within 0-54 h and 0-60 h after ovulation, in milk and serum, respectively. Statistically significant differences (p less than 0.05) in progesterone levels were observed for the first time 12-18 h and 18-24 h after ovulation, in serum and milk, respectively, as compared to progesterone levels 0-6 h after ovulation.     

Post-partum ovarian activity in Finnhorse mares with special reference to seasonal effects.

In a previous study, times from parturition to the first ovulation were followed in 55 Finnhorse mares on the basis of milk progesterone determinations. Ninety-six per cent of mares had ovulated by day 20 post-partum. If intervals of more than 19 days are excluded from the data, the time from parturition to 1st ovulation was 117 days. However, in cases of foaling before and after the beginning of June the times were 13.0 days and 8.8 days, respectively (p less than 0.001). Long intervals (over 16 days) occurred mainly before 1st May (in 6 out of 7 cases). In a 2nd study, 25 post-partum Finnhorse mares were examined by rectal palpation and ultrasonic scanning. Five and 7 days post partum, but not 2 days post partum there was a statistically significant difference between ovulatory ovaries and non-ovulatory ovaries regarding size of whole ovary and the largest follicle. Six to 8 days before the first post-partum ovulation, the size of the preovulatory follicle was greater in mares which had foaled before the middle of May (32 mm) than in those which had foaled after the middle of May (20 mm) (p less than 0.05). Within 2 days before ovulation there was no statistical difference between the sizes (43 mm and 42 mm, respectively). The growth rate was therefore slower in cases of early foaling (1.8 mm/day) than in cases of late foaling (3.7 mm/day).     

Growth in the Reindeer

The growth of the reindeer from birth to adulthood is cumulative consisting of a rapid weight accretion during summers followed by a weight loss or stasis during winters. The birth weight of the newborn calves is about 5.3 kg. The peri- and neonatal growth rate is rather high, with a greatest individual daily weight gain as high as 400 g. The polynomial growth curve and its first order time derivative of calves show a deceleration of weight gain towards the autumn. The weight of calves at an age of 10 months was 36 to 40 kg. Adult body weight is reached by females at an age of 3 to 4 years and by males on average a year later. Serum alkaline phosphatase activity showed a negative linear correlation with age and weight in calves and it was highest both in calves and adults in summer. The creatine Phosphokinase activity in both calves and adults was higher in summer than in other seasons. Serum inorganic phosphorus was highest in the growing calves. On the other hand serum thyroxine (T4), blood glucose and calcium did not show significant age-dependent or seasonal variations.     

An isotopic exchange method for the characterization of the irreversibility of pesticide sorption-desorption in soil

An isotopic exchange method is presented that characterizes the irreversibility of pesticide sorption-desorption by soil observed in batch equilibration experiments. The isotopic exchange of (12)C- and (14)C-labeled triadimefon [(1-(4-chlorophenoxy)-3,3-dimethyl-1-(1H-1, 2,4-triazol-1-yl)-2-butanone] and imidacloprid-guanidine [1-[(6-chloro-3-pyridinyl)methyl]-4,5-dihydro-1H-imidazol-2-amine] in Hanford sandy loam soil indicated that these systems can be described by a two-compartment model in which about 90% of sorption occurs on reversible, easily desorbable sites, whereas 10% of the sorbed molecules are irreversibly sorbed on soil and do not participate in the sorption-desorption equilibrium. This model closely predicted the hysteresis observed in the desorption isotherms from batch equilibration experiments. The isotopic exchange of triadimefon and imidacloprid-guanidine in Drummer silty clay loam soil indicated that there was a fraction of the sorbed (14)C-labeled pesticide that was resistant to desorption, which increased as pesticide concentration decreased and was higher for triadimefon than for imidacloprid-guanidine. In contrast, the batch equilibration method resulted in ill-defined desorption isotherms for the Drummer soil, which made accurate desorption characterization problematic.     

Acetochlor Persistence in Surface and Subsurface Soil Samples

Two cadmium-resistant bacteria, Ralstonia sp. TAK1 and Arthrobacter sp. TM6, produced exopolymers that promoted cadmium solubilization in contaminated soil. The enhancement of cadmium uptake and accumulation in a monocot (Vetiveria nemoralis, vetiver grass) and a dicot (Ocimum gratissimum, African basil) was investigated in a greenhouse study. Compared with the uninoculated control, Ralstonia sp. TAK1 and Arthrobacter sp. TM6 increased cadmium accumulation in the roots and shoots of V. nemoralis. These cadmium-resistant bacteria increased the cadmium content of whole V. nemoralis plants similarly to ethylenediaminetetraacetic acid (EDTA) treatment alone. In contrast, only Arthrobacter sp. TM6 enhanced cadmium accumulation in the roots and shoots of O. gratissimum. The highest cadmium content of whole O. gratissimum plants was observed when the plant was treated with EDTA following treatment with Arthrobacter sp. TM6. The phytoextraction coefficient and translocation factor (TF) of bacteria-inoculated V. nemoralis were higher than those of O. gratissimum. Arthrobacter sp. TM6 increased the phytoextraction coefficients and TFs in V. nemoralis and O. gratissimum. These results indicate that Arthrobacter sp. TM6 and both tested plant species promote cadmium phytoextraction in contaminated soil.     

Airborne small-footprint discrete-return LiDAR data in the assessment of boreal mire surface patterns, vegetation, and habitats

Boreal mires encompass high diversity in species and habitats, many of which are endangered. In Finland, extensive use of peatlands has resulted in habitat fragmentation. A need for accurate and cost-efficient vegetation mapping and monitoring of habitat changes exists in mire conservation, restoration and peatland forestry. LiDAR is an emerging and excellent tool for probing the geometry of vegetation and terrain. Modern systems measure the backscattered signal accurately and also provide radiometric information. Experiments were carried out in a complex minerotrophic–ombrotrophic eccentric raised bog in southern Finland (61°47′N, 24.18′E). First, we tested discrete-return LiDAR for the modeling of mire surface patterns and the detection of hummocks and hollows, as well as the effect of mire plants on the Z accuracy of the surface echoes. Secondly, the response of different mire vegetation samples in LiDAR intensity was examined. Thirdly, we tested area-based geometric and radiometric features in supervised classification of mire habitats to discover the meaningful variables. The vertical accuracy of LiDAR in mire surface modeling was high: 0.05–0.10 m. A binary hummock-hollow model that was estimated from a LiDAR-based elevation model matched flawlessly in aerial images and had moderate explanatory power in habitat classification trials. The intensity of LiDAR in open-mire vegetation was mainly influenced by the surface moisture, and separation of vegetation classes spanning from ombrotrophic to mesotrophic vegetation proved to be difficult. Area-based features that characterize the height distribution of LiDAR points in the canopy were the strongest explanatory variables in the classification of 21 diverse mire site types. Actual qualifying differences in the ground flora were unattainable in the LiDAR data, which resulted in inferior accuracy in the characterization of ecohydrological conditions and nutrient level of open mires and sparsely forested wet sites. Mire habitat classification accuracy with LiDAR surpassed earlier results with optical data. The results suggested that LiDAR constitutes an efficient aid for monitoring applications. We propose the co-use of images and LiDAR for enhanced mapping of open mires and tree species. In situ calibration and validation procedures are required until invariant geometric and radiometric features are discovered.     

Mineralization of the Bacillus thuringiensis Cry1Ac endotoxin in soil

Although a number of studies have been done describing the fate of Bacillus thuringiensis insecticidal endotoxins in soil, there is conflicting information on the persistence of this class of insecticidal toxins. This is partly due to methodological limitations in many of the previous studies. In the experiments reported here, 14C-labeled B. thuringiensis Cry1Ac endotoxin was used to study its mineralization in soil incubated under controlled conditions. Fifty-nine percent of the radiolabeled Cry1Ac was recovered as 14CO2 at the end of the 20 day incubation period. The addition of 4.5% corn residues stimulated mineralization of [14C]Cry1Ac toxin, and mineralization of glucose was 3.6 times faster than that of the Cry1Ac toxin, indicating that the soil was microbiologically and metabolically active. Because only low mineralization (approximately 6%) of the radiolabeled toxin was observed in autoclaved soil, the current findings indicate that microbial processes play a major role in the dissipation of the Cry1Ac endotoxin in soil. The results of this study suggest that there may be limited risk of the bioaccumulation of Cry1Ac in soil due to the eventual release of this insecticidal toxin by Bt-protected crops.     

Improvement in feed efficiency and reduction in nutrient loading from rainbow trout farms: the role of selective breeding

Resource efficiency, the ratio of inputs to outputs, is essential for both the economic and environmental performance of any sector of food production. This study quantified the advancement in the feed conversion ratio (FCR) and reduction in nutrient loading from rainbow trout farming in Finland and the degree to which genetic improvements made by a national breeding program have contributed to this advancement. The study combined two datasets. One included annual records on farm-level performance of commercial rainbow trout farms from 1980 onwards, and the other included individuals across eight generations of the national breeding program. The data from the commercial farms showed that from 1980 onwards, the farm-level feed conversion ratio improved by 53.4%, and the specific nitrogen and phosphorus loading from the farms decreased by over 70%. Hence, to produce 1 kg of fish today, only half of the feed is needed compared to the 1980s. The first generation of the breeding program was established in 1992. The FCR was not directly selected for, and hence, the genetic improvement in the FCR is a correlated genetic change in response to the selection for growth and body composition. Since 1992, the estimated genetic improvement in the FCR has been 1.74% per generation, resulting in a cumulative genetic improvement of 11.6% in eight generations. Genetic improvement in the FCR is estimated to be 32.6% of the total improvement in the FCR observed at farms, implying that genetic improvement is a significant contributor to resource efficiency. The use of genetically improved rainbow trout, instead of the base population of fish, reduces feed costs by 18.3% and total production costs by 7.8% at commercial farms (by −0.266€ per kg of ungutted fish). For phosphorus and nitrogen, it can be assumed that the use of fish material with an improved FCR also leads to 18.3% less nitrogen and phosphorus flowing into an aquatic environment. Such improvements in resource efficiency are win–wins for both industry and the environment—the same amount of seafood can be produced with significantly reduced amounts of raw materials and reduced environmental impact.