The effect of strain, growth stage, and cultivating condition of Ganoderma lucidum on 5α-reductase inhibition

The inhibitory effects of 102 methanol extracts of 40 mycelia, 9 culture fluids, and 53 fruiting bodies of 40 strains of Ganoderma lucidum on 5-reductase were investigated. The methanol extract of the fruiting body of each strain was found to show the strongest 5-reductase inhibitory activity among the extracts tested.     

Response of gas exchange rates in <Emphasis Type="Italic">Abies firma</Emphasis> seedlings to various additional stresses under chronic acid fog stress

In order to clarify the chronic influence of acid fog on the gas exchange rates of momi fir (Abies firma Sieb. et Zucc.) trees, we exposed them to simulated acid fog (pH 3) for 3 years. The composition of the acid fog was similar to that observed in a region where momi fir trees have been declining, and it contained organic acids. We then treated the firs with various additional stresses, such as drought, low temperature, fine root cutting, ozone exposure, soil acidification, nitrogen load, and rhizosphere aluminum stress. Under chronic exposure to acid fog, the momi fir seedlings exhibited a pattern of stomatal behavior whereby they excessively opened in summer and closed in winter. Furthermore, the stomata of these seedlings tended to open during drought stress, and their needles were visibly injured after ozone exposure. The net photosynthesis rates of the seedlings exposed to acid fog were regulated by their stomatal aperture, rather than directly by acid fog. These results suggest that acid fog exposure disturbs the control of stomatal function in the momi fir seedlings. In addition, we found that chronic acid fog exposure suppressed the decrease in net photosynthesis rate, due to its nitrogen load.     

Chemical changes of kenaf core binderless boards during hot pressing (I): influence of the pressing temperature condition

Self-bonding is the main factor of the performance expression of binderless boards, and therefore its clarification is considered to be an important issue. For this purpose, a series of chemical analyses were conducted on kenaf core binderless boards and their chemical changes during the hot-pressing process are discussed in this article. First of all, binderless boards were prepared from kenaf core powder at different pressing temperatures (without steam-explosion process) and were used for chemical analyses after they were reduced into powders and extracted with methanol. To investigate their chemical changes, lignin, holocellulose, and neutral sugar contents were determined, Fourier transform infrared (FTIR) spectra were recorded, and the nitrobenzene oxidation procedure was applied. As a result, it was found that parts of lignin and hemicelullose were decomposed during the hot-pressing process; however, the contribution of the resulting fractions to selfbonding was not observed. In addition, progress of condensation reactions in lignin and the formation of chemical bonds by low molecular weight conjugated carbonyl compounds in methanol extractives were observed. Thermal softening of lignin is also suggested to play an important role in the expression of board performance.     

Manufacture and mechanical properties of binderless boards from kenaf core

Binderless boards were prepared from finely ground powders of kenaf (Hibiscus cannabinus L.) core under varying manufacturing conditions. This research was designed to investigate their mechanical properties and evaluate the various manufacturing conditions: pressing temperature and time, pressing pressure, board density, board thickness, grain size of raw materials, and addition of furfural. The mechanical properties (i.e., modulus of rupture and elasticity, internal bonding strength) of boards increased with increasing board density and met the requirement for 15 type medium-density fiberboard (MDF) by JIS A 5905-1994. Thickness swelling and water absorption of boards exceeded the maximum permitted levels for 15 type MDF and S20 grade hardboard by JIS A 5905-1994, which indicates the low water-resistant property of binderless boards. In contrast to that in usual wood-based materials, internal bonding strength showed significant correlations with other board properties: modulus of rupture and elasticity, thickness swelling, and water absorption. We confirmed experimentally that the best manufacturing conditions proved to be as follows: pressing temperature 180°C, time 10min; pressing pressure 5.3MPa; board thickness 5mm; board density 1.0g/cm³; average grain size 53µm; and powder with no furfural content.Part of this paper was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002     

A split-root apparatus for examining the effects of hydraulic lift by trees on the water status of neighbouring crops

We describe a split-root system for examining the effects of hydraulic lift by trees on crop growth. In this system, upper lateral tree roots were grown in a container set on the ground through which the taproot of the tree could penetrate into the moist soil below. The container, with a radius of 0.5 m and a height of 0.20 m, consisted of two compartments divided by a waterproof barrier. A markhamia tree (Markhamia lutea (Benth.) Schumann) and upland rice (Oryza sativa (L.)) plants were planted in one compartment, with only rice plants planted in the other compartment. Irrigation of the container was ceased at the start of the experiment. The stomatal conductance of the rice plants in the associated side, in which both trees and rice plants were grown, declined more rapidly during the first drying period than in the rice-only compartment, suggesting that there was competition for water between the tree and the crop plants. However, during the later drying period, the rice plants in the associated side were green and viable, while those in the rice-only side became desiccated. Rice roots were seen intermingling with tree roots, and the soil water content in the associated site tended to be higher than in the rice-only side. It is likely that hydraulic lift occurred in the associated side and that water that had been transferred to the surface roots was released into the soil, enabling the rice plants in this compartment to remain viable. This novel system is useful for examination of the effects of hydraulic lift by trees on the growth of neighbouring crops. This revised version was published online in June 2006 with corrections to the Cover Date.     

Mass propagation method from the cutting of three dipterocarp species

We developed a vegetative propagation system for mass-producing three dipterocarps species,Shorea selanica Bl.,Shorea leprosula Mig., andShorea platyclados Sloot. This system uses fog evaporative cooling inside a greenhouse to reduce the leaf-to-air vapor pressure deficit (leaf-to-air VPD) inside the propagator, even under high irradiance conditions. This cooling method has no negative influence on medium conditions such as overwetting. A plastic tent propagator combined with this cooling method was used for vegetative propagation experiments. In mass-production experiments, the annual rooting percentages from the cuttings were low in the first 2 years (1997–1998) due to operational problems of the tent propagator (S. selanica, 48–51%;S. leprosula, 56–59%;S. platyclados: 50–63%). A hard cover propagator improved the rooting percentages in the mass-production experiments in 1999 because it made operations easier (S. selanica, 70%;S. leprosula, 77%;S. platyclados, 77%). This system, which uses a combination of fog evaporative cooling and a hard plastic propagator, should be useful for the mass propagation of these dipterocarp planting stocks. This study was carried out under a joint project of the Ministry of Forestry, Indonesia and Komatsu Ltd. The project was supported by Research Association for Reforestation of Tropical Forest (RETROF) organized by Japanese Forestry Agency.     

Species composition of Modellidae and Cerambycidae (Coleoptera) in a coppice woodland

A continuous sampling of canopy beetles was carried out to determine variations in the abundance, species diversity, richness, and composition of the Mordellidae and Cerambycidae in a coppice woodland. Changes in the abundance and the species richness were monitored at three heights in the forest throughout the season in 1999, using yellow and blue water pan traps. The results showed significant variations in the abundance of Mordellidae among the canopy layers, while little variation was found for Cerambycidae. The abundance, species diversity, and richness were generally greater in summer. The results showed distinct species compositions in both families among layers.     

Chemical structures of the condensed tannins in the fruits of Diospyros species

The structural variety of the condensed tannins (proanthocyanidins) in the fruits of 16Diospyros species are reported. Eleven species contained condensed tannins mostly consisting of a mixture of catechin (CA) and gallocatechin (GCA) repeating units; the other five species did not. The GCA content in the CA-GCA total varied from 0.3% to 84.6%. The number of esterified gallic acid per one flavan repeating unit (degree of galloylation, DG) ranged from 0.01 to 0.89. The GCA content was found to be proportional to the DG values. Thus, 16Diospyros species tested may be classified into five groups by the analytical data of their condensed tannins. It may be interesting to compare their structural characteristics with those of the condensed tannins in other fruits, leaves, woods, and barks from the viewpoint of their biosynthesis and function in the plants.Part of this paper was presented at the 46th Annual Meeting of the Japan Wood Research Society, Tokyo, April 1995