Comparative Performance of Copper and Silver Coated Stretchable Fabrics

The present work described the development of multifunctional, electrically conductive and durable fabrics by coating of silver and copper particles using a dipping-drying method. The particles were directly grown on fabric structure to form electrically conductive fibers. Particles were found to fill the spaces between the microfibers, and were stacked together to form networks with high electrical conductivity. The electrically conductive fabrics showed low resistance with high stretch ability. The utility of conductive fabrics was analyzed for electromagnetic shielding ability over frequency range of 30 MHz to 1.5 GHz. The EMI shielding was found to increase with increase in concentration of copper and silver particles. Furthermore, the heating performance of the copper and silver coated fabric was studied through measuring the change in temperature at the surface of the fabric while applying a voltage difference across the fabric. The maximum temperature (119°C for silver and 112°C for copper) were obtained when the applied voltage was 10 V. Moreover, the role of deposited particles on antibacterial properties was examined against pathogenic bacteria such as Staphylococcus aureus and Escherichia coli. At the end, the durability of coated fabrics was examined against several washing cycles. The fabrics showed good retention of the particles, proved by small loss in the conductivity of the material after washing.     

Real-time controlled direct injection system for precision farming

Real-time controlled pesticide application requires a fast reacting system, enabling continuous variation of pesticide type and concentration based on a control signal. Direct injection systems meet the requirements for such application; however there are significant differences in the response time and quality of single system designs. This article discusses the complex of problems in direct injection systems in connexion with real-time control and proposes optimisations of system parts in order to reduce the response time and improve the quality of the process. The system response time was reduced to 160 ms for 1% output concentration by optimization of the control process, injection assembly and mixing chamber design.     

Influence of noncellulosic contents on nano scale refinement of waste jute fibers for reinforcement in polylactic acid films

In the present study, nanofibrils of cellulose are extracted from waste jute fibers using high energy planetary ball milling process in wet condition. The rate of refinement of untreated fibers having non-cellulosic contents was found slower than treated fibers due to strong holding of fiber bundles by non-cellulosic contents. At the end of three hours of wet milling, untreated fibers were refined to the size of 850 nm and treated fibers were refined to the size of 443 nm. In the subsequent stage, composite films of poly lactic acid (PLA) were prepared by solvent casting with 3 wt% loading of untreated jute nanofibrils, treated jute nanofibrils and microcrystalline cellulose. The influence of non-cellulosic contents on mechanical properties of PLA films are investigated based on results of tensile test, dynamic mechanical analysis and differential scanning calorimetry. The maximum improvement was observed in case of treated jute nanofibril/PLA composite film where initial modulus and tensile strength increased by 207.69 % and 168.67 %, respectively as compared to neat PLA film. These improvements are attributed to the increased interaction of treated jute nanofibrils with PLA matrix due to their higher precentage of cellulosic contents and mechanically activated surface.     

Mechanical,thermal and interfacial properties of green composites from basalt and hybrid woven fabrics

Composites based on pure Basalt and Basalt/Jute fabrics were fabricated. The mechanical properties of the composites such as flexural modulus, tensile modulus and impact strength were measured depending upon weave, fiber contents and resin. Dynamic mechanical analysis of all composites were done. From the results it is found that pure basalt fiber combination maintains higher values in all mechanical tests. Thermo-gravimetric (TG/DTG) composites showed that thermal degradation temperatures of composites shifted to higher temperature regions compared to pure jute fabrics. Addition of basalt fiber improved the thermal stability of the composite considerably. Scanning electron microscopic images of tensile fractured composite samples illustrated that better fiber-matrix interfacial interaction occurred in hybrid composites. The thermal conductivity of composites are also investigated and thermal model is used to check their correlation.     

Increased expression of GAPDH protein is not indicative of nitrosative stress or apoptosis in liver of starved rainbow trout (Oncorhynchus mykiss)

Short-term starvation has been linked to in vivo protein degradation in liver of rainbow trout (Oncorhynchus mykiss). However, it is unclear whether this proposed increase in protein degradation is followed by programmed cell death (apoptosis) in liver of starved trout. A preliminary study in our laboratory revealed an isoform of glyceraldehyde-3-phosphate dehydrogenase (GAPDH) protein that increased 4.5-fold in liver of starved trout. GAPDH is a glycolytic enzyme involved in other cellular functions, including apoptosis. Increased intracellular nitric oxide (NO) promotes nuclear translocation of GAPDH that is associated with increased apoptosis in mammals. If GAPDH protein is associated with apoptosis in rainbow trout, it could potentially be used as a biomarker of cellular stress in liver of teleost fish species. The purpose of this study was to determine whether increased GAPDH protein expression in liver of starved rainbow trout is associated with NO-induced apoptosis. Targeted proteomic analysis using multiple reaction monitoring (MRM) was used to determine the level of GAPDH in nuclear and cytoplasmic fractions and inducible nitric oxide synthase (iNOS) in cell lysates. Dot blot and DNA fragmentation analyses were conducted to evaluate protein S-nitrosylation and apoptosis, respectively. Results showed that cytoplasmic GAPDH was 3.4-fold higher in liver of starved versus fed rainbow trout but could not be detected in nuclear fractions. Starvation significantly reduced hepato-somatic index but had no effect on iNOS protein expression, protein S-nitrosylation, or apoptosis. Our results indicate that starvation promoted significant reduction in liver mass that was not associated with increased apoptosis or NO-induced stress and that greater GAPDH concentration in liver of starved rainbow trout was located primarily in the cytoplasm.     

Changes in the nutritional parameters of muscles of the common carp (Cyprinus carpio) and the silver carp (Hypophthalmichthys molitrix) following environmental exposure to cyanobacterial water bloom

The present study evaluated the effect of naturally developing cyanobacteria on the composition of muscles of two commercially important freshwater fish species. Fish were exposed to cyanobacterial biomass including Microcystis aeruginosa and Microcystis ichthyoblabe for 4 weeks. Then, they were transferred to dechlorinated potable water without any cyanobacteria for another 4-week period, thus modelling their preparation for consumers. Samples of muscles were collected every week during exposure and subsequent stay in dechlorinated potable water. The cyanobacterial water bloom of 3.9–6 × 10⁵ cells mL⁻¹ (133–383 μg g⁻¹ of total MC DW) induced statistically significant effects only in the content of fatty acids ( P <0.05; P <0.01) in the common carp ( Cyprinus carpio ), while all studied parameters including the content of dry matter and fat ( P <0.01), proteins ( P <0.05), fatty acid composition ( P <0.05; P <0.01) and some amino acids ( P <0.05) were affected in the silver carp ( Hypophthalmichthys molitrix ). This study has shown that cyanobacteria in the environment of commercially produced fish may decrease the dietetic value of fish muscles.     

Targeted identification of genomic regions using TAGdb

Background

The introduction of second generation sequencing technology has enabled the cost effective sequencing of genomes and the identification of large numbers of genes and gene promoters. However, the assembly of DNA sequences to create a representation of the complete genome sequence remains costly, especially for the larger and more complex plant genomes.

Results

We have developed an online database, TAGdb, that enables researchers to identify paired read sequences that share identity with a submitted query sequence. These tags can be used to design oligonucleotide primers for the PCR amplification of the region in the target genome.

Conclusions

The ability to produce large numbers of paired read genome tags using second generation sequencing provides a cost effective method for the identification of genes and promoters in large, complex or orphan species without the need for whole genome assembly.     

桔梗种子成熟与主要气象要素的关系

在桔梗开花期,计算桔梗开花后每5 d的千粒质量和成熟度的增长量,分析桔梗种子成熟度与主要气象要素之间的关系。结果表明:在吉林省桔梗种子要完全成熟,开花后需要55 d以上的时间;种子成熟与主要气象要素之间没有显著的相关性,种子成熟主要受桔梗本身发育规律支配。     

Kinematic Viscosity and Shear Stress of Used Engine Oil

The goal of this paper describes kinematic viscosity and shear stress of two used engine oils, which have been taken from two different passenger cars. Kinematic viscosity and shear stress are two of the most important physical behaviours of fluids, especially lubricating fluids. In this paper the authors have focused on engine oil. Knowledge of these properties of engine oil is very important due to its lifetime. The experiments have been done using digital rotary rheometer Anton Paar DV-3 P with use of TR8 spindle and special adapter for a small amount of sample （20 mL）. Two different engine oils have been observed--first from passenger car Renault Scenic with petrol engine （engine capacity 1.6 dm3） and the second from passenger car Skoda Roomster with diesel engine （engine capacity 1.4 dm3）. Castrol Magnatec 10W-40 engine oil has been taken from Renault car and Shell Helix Ultra Extra 5W-30 engine oil has been taken from ~koda car. Service interval of change oil has been set to 15,000 km and samples of used engine oils have been taken after 1,500 km. Only first samples of used engine oils have been taken after raid of 20 km. All samples of used engine oils have been compared with new （unused） engine oils same specification. The measured values of kinematic viscosity and shear stress have been modeled using linear function. The coefficients of correlation R have been achieved high values （0.88-0.96）. The obtained models can be used to prediction of engine oil flow behaviour.