山羊卵泡卵母细胞的采集及体外成熟效果研究

为了获取高质量的卵泡卵母细胞，提高山羊体外胚胎生产的效率，采用切剖法与抽吸法采集卵泡卵母细胞，并对获得的可用卵母细胞进行了体外成熟培养。结果表明，切剖法能够获得较多的可用卵母细胞，可以明显增加用于体外成熟的卵母细胞数；卵母细胞的体外成熟率与卵泡直径密切相关，大卵泡与中卵泡的卵母细胞成熟率明显高于(P<0.05)小卵泡；山羊卵泡卵母细胞的体外成熟培养液中FCS的添加比例以10% ~ 15%为益。在一定范围内，提高FCS的浓度，并不能提高卵母细胞的成熟率。     

棉花烂铃空间格局及抽样技术研究

本文通过聚集度指标（如：Ｃ、Ｋ、Ｃ＿Ａ、Ｉ、Ｉ＿δ、）测定，以及Ｉｗａｏ’线性回归、Ｔａｙｌｏｒ’ｓＳ￣２一回归和格局纹理分析，结果表明，棉花烂铃空间格而在一切密度下都呈聚集型，且聚集强度随烂铃密度的升高而增加，其空间格局的基本成分是疏松的个体群，其大小约为２～５株棉花，平均约含２．８４个烂铃个体，且个体群内的个体呈随机分布，经μ检验和方差分析，双对角线５点式、棋盘式和平行跳跃式等３种取样方法均适用于棉花烂铃田间调查，尤以双对角线５点式为佳，用双对角线５点式应样法调查的最适抽样数：一般病情普查至少１０个样方（每样方系５株棉花），系统测报和科研调查为２０～３０个样方。最后给出了棉花烂铃平均密度的零频率简易估计模型。     

Modeling soil water dynamics in a drip-irrigated intercropping field under plastic mulch

Intercropping, drip irrigation, and the use of plastic mulch are important management practices, which can, when utilized simultaneously, increase crop production and save irrigation water. Investigating soil water dynamics in the root zone of the intercropping field under such conditions is essential in order to understand the combined effects of these practices and to promote their wider use. However, not much work has been done to investigate soil water dynamics in the root zone of drip-irrigated, strip intercropping fields under plastic mulch. Three field experiments with different irrigation treatments (high T1, moderate T2, and low T3) were conducted to evaluate soil water contents (SWC) at different locations, for different irrigation treatments, and with respect to dripper lines and plants (corn and tomatoes). Experimental data were then used to calibrate the HYDRUS (2D/3D) model. Comparison between experimental data and model simulations showed that HYDRUS (2D/3D) described different irrigation events and SWC in the root zone well, with average relative errors of 10.8, 9.5, and 11.6 % for irrigation treatments T1, T2, and T3, respectively, and with corresponding root mean square errors of 0.043, 0.035, and 0.040 cm³ cm^?3, respectively. The results showed that the SWC in the shallow root zone (0–40 cm) was lower under non-mulched locations than under mulched locations, irrespective of the irrigation treatment, while no significant differences in the SWC were observed in the deeper root zone (40–100 cm). The SWC in the shallow root zone was significantly higher for the high irrigation treatment (T1) than for the low irrigation treatment, while, again, no differences were observed in the deeper root zone. Simulations of two-dimensional SWC distributions revealed that the low irrigation treatment (T3) produced serious severe water stress (with SWCs near the wilting point) in the 30–40 cm part of the root zone, and that using separate drip emitter lines for each crop is well suited for producing the optimal soil water distribution pattern in the root zone of the intercropping field. The results of this study can be very useful in designing an optimal irrigation plan for intercropped fields.     

玉米收获机拉茎辊的改进设计

针对摘穗板-拉茎辊组合式摘穗装置在玉米收获过程中存在的问题,对拉茎辊进行改进设计。改进后的拉茎辊叶片轴采用无缝钢管经模具拉伸成型,整个叶片轴是一体的,叶片棱面为圆弧结构,并且将叶片轴后端与销轴连接的卡槽尺寸加大,加装金属耐磨套。该改进方案解决了传统拉茎辊易开焊、振动大、寿命短等问题。利用Solid Works软件对改进后拉茎辊进行有限元分析得知:应力和最大应变主要分布在拉茎辊后端的U型槽内,最大位移分布在叶片棱上,都在材料的变化范围内,改进方案合理。     

汽车仪表总成终检台系统开发

针对“汽车仪表总成终检台”系统的开发,,论述了系统设计的背景、设计原理和设计思想:该系统应用于汽车仪表总成出厂前的各项性能测试,并把实测的各项指标存放于数据库中,使得产品的可追溯性得以实现,它对国产汽车仪表总成的各项性能检测趋于科学化、规范化、批量化,使其能达到国际汽车工业的同等水平。     

内燃机燃烧模型的发展现状

利用CFD技术对内燃机燃烧过程进行数值模拟已成为内燃机研究的重要工具。选用恰当的燃烧模型对准确预测内燃机燃烧过程具有重要意义。内燃机CFD燃烧模型主要针对自燃、预混燃烧和非预混燃烧3种燃烧模式，其中有些模型可以同时模拟2种模式或3种模式。内燃机新的燃烧系统的不断出现促进了燃烧模型的发展。本文以STAR—CD和FIRE软件为出发点，介绍了内燃机燃烧模型的发展现状。     

电动助力转向系统转向性能的客观评价

针对电动助力转向的结构特点，分析了电动助力转向对汽车转向性能的影响，提出从转向轻便性、转向回正性、转向盘中间位置区域性能、转向盘振动、随动灵敏度和助力特性等方面进行电动助力转向系统转向性能的客观评价，并探讨了相应的评价指标，对电动助力转向助力控制规律、基本设计参数以及相关试验标准的确定有指导意义。     

物料状态对圆筒式短茎秆清理装置性能的影响

以喂入量和含杂率为试验因素，研究了圆筒式短茎秆清理装置的分离性能，分析了该装置沿长度方向的分离规律，给出了使用中的长度确定原则。     

液压悬挂试验的加载误差及其补偿

通过对下支点固定式油缸加载工况下拖拉机液压悬挂装置的受力分析，推导出这种国内外常用试验台设计方案的加载误差，并给出试验数据的修正方法以补偿该项误差的影响。     

弧型齿残膜捡拾滚筒捡膜的机理

对弧型齿残膜清理滚筒捡膜齿的轴向排列、滚筒转速、捡膜齿运动轨迹和各相关参数进行分析研究,初步找出弧型捡膜齿满足要求的排列布置、滚筒转速和合理的入土深度,确定了残膜回收机具的运动参数λ范围,为残膜清理滚筒的设计提供了理论依据。试验表明,所设计的残膜回收机具运动参数是合理的,在保证膜土分离效果好和较高残膜捡拾率的前提下可显著提高工作效率。