METAL MATRIX PARTICULATE COMPOSITES BY SPRAYING CODEPOSITION

The spraying codeposition process is used to produce metal matrix paniculate composites, whose technical procedure and main processing parameters are analyzed. The microstructure of the composites is examined and the properties are tested. The solidification characteristics in the spraying deposition and solidification process are discussed. The results indicate that several problems involved in conventional methods can be overcome with this technique to preduce metal matrix paniculate composites. The reinforce particles are dispersed in the matrix homogeneously without solidification segregation. Compared with the matrix alloy,the composite proves to be harder and has excellent wear resistance.     

THE MECHANICAL MODEL ON IMPACT SYSTEM AND ITS PARAMETER IDENTIFICATION

A new mechanical model on impact system with non-linear element is presented and the practical method for measuring and identifying the parameters is also studied. The results of the experimental analysis and theoretical calculations are satistactory. And we hope to provide more acurate theorecical model for the study and design of impact dampers.     

TRUST REGION METHOD FOR UNCONSTRAINED OPTIMIZATION

A new trust region algorithm is proposed for solving unconstrained optimization problems. According to the quadratic approximate model of the original optimization problem,the trust region algorithm uses directions,a convex combination of the quasi-newton direction and the steepest descent direction. This algorithm with new strategy is analyzed and the global and local quadratic convergent theorems are proved. At last,the implementation and computational results of the algorithm are demonstrated.     

A Study on the Practical Algorithm for One Dimensional Equal Stock Cutting Problem

Based on alalysing the mathematical models for one dimensional equal stock cutting problem,a knapsack column generation algorithm has been constructed,which is a successive approximate algorithm for the practical engineering.In the end of this paper,some computational examples have been presented,which show that the convergence and optimum results of the algorithm are quite good.     

节节麦与野燕麦8倍体杂种核型分析

节节麦(Aegilops tauschii(Coss.)Sch.2n=2x=14)与通北野燕麦(Avena fatua L.2n=6x=42)杂交,F_1自然加倍成8倍体,8倍体播成的F_2代,遗传性基本一致,PMC镜检表明,染色体数为2n=28Ⅱ。用F_2所结的种子进行根尖细胞核型分析,结果发现8倍体中包含有全套的节节麦和野燕麦的染色体。节节麦中有1对随体染色体.2对近中部着丝点染色体,4对中部着丝点染色体。野燕麦有3对随体染色体,5对近端着丝点染色体,8对近中部着丝点染色体,5对中部着丝点染色体。而节节麦与野燕麦8倍体杂种,有4对随体染色体,5对近端着丝点染色体.10对近中部着丝点染色体,9对中部着丝点染色体。核型分析结果表明,节节麦与野燕麦杂交合成的8倍体,是节节麦与野燕麦的双二倍体。     

人工合成甘蓝型油菜高频率再生研究初报

资源材料保存在作物遗传资源的研究与利用中起到非常重要的作用。该实验以不同来源的人工合成甘蓝型油菜KH106，KH109，KH111D为材料，以花序轴，子房，果柄为外植体研究其再生情况，结果表明，由芥蓝和小白菜人工合成的甘蓝型油菜KH106的再生频率极显著高于由羽衣甘蓝和白菜型油菜人工合成的甘蓝型油菜KH109和KH111；与花序轴和子房为外植体再生频率相比，以果柄为外植体平均再生频率最高，差异达到极显著水平；利用不同预处理培养基处理不同时间，结果显示不经过预处理直接接种到分化培养基上再生频率最高。     

不同生态环境马铃薯维生素C含量分析

对马铃薯参试品种在西北地区不同生态条件下的维生素C含量变化进行方差分析和稳定性分析。结果表明：试点间、品种间以及试点和品种的互作间都存在着极显著差异，6个品种平均维生素C含量为15．04mg／100g，陇薯3号最高，为18．68mg／100g，90-2-10最低。为12．23mg／100g；7个地点平均维生素C含量为15．04mg／100g，青海西宁最高，为16．75mg／100g，青海海南最低，为12．93mg／100g。中薯36这个品种的回归系数〈1，是稳定性较好的品种。     

贵阳地区水稻中甲胺磷农药残留研究

甲胺磷（methamidophos）具有内吸、触杀和胃毒杀作用，防治抗性蚜、蟥和水稻叶蝉、悦虱等药效较好，但残留期较长，有时会影响作物的品质。通过对贵阳地区水稻中甲胺磷农药残留分析，得到贵阳地区的大米中甲胺磷未检出。样品以丙酮提取，经过盐析、再经二氯甲烷萃取后进行气相色谱分析（最低检测浓度为0.03μg/g），本方法的结果符合农药残留分析的要求，因此说明贵阳地区的大米中甲胺磷没有超标，为贵阳地区绿色食品的开发提供理论依据。     

不同农艺措施对旱地谷子水分利用效率的影响

１９８８￣１９９０年在山西省屯留试点进行了不同农艺措施对旱地谷子水分利用效率影响的研究，结果表明，肥料是影响旱地农田水分利用效率的主要因子，其次是品种、密度和播期。     

猕猴桃溃疡病生防芽孢杆菌B2的鉴定及应用

猕猴桃溃疡病是一种毁灭性细菌病害,该病发展迅速,防治难度大,严重制约了猕猴桃产业的发展。为找到一种有效防治该病的方法,针对化学防治易产生抗药性、污染环境、杀伤天敌等特点,从猕猴桃根际土壤中分离共获得25株芽孢杆菌,采用点菌法筛选出4株对猕猴桃溃疡病菌(Pseudomonas syringae pv.actinidiae)具有拮抗效果的菌株(抑菌圈直径达到5 mm以上),其中B2拮抗作用最强。根据菌落(体)形态特征、生理生化鉴定以及16S r DNA序列分析,初步鉴定B2为蜡样芽孢杆菌(Bacillus cereus)。将B2的发酵原液稀释成1×109cfu/m L的发酵液,并在此基础上依次配制50、100、500、1000、2000倍的稀释液,用于盆栽试验。盆栽试验采用喷雾法,30天后的防治效果分别达到了90.45%、86.52%、80.90%、67.98%、47.19%、15.73%,60天后尽管病斑有少量增加,旧病斑有所增大,但与对照相比,病斑增长速度明显减缓。大田试验结果证明,该菌具有较好的生防潜力,喷雾法选择B2发酵液的50倍稀释液,涂抹法选择B2发酵液的100倍稀释液,可有效降低猕猴桃溃疡病的危害。