Zirconium-Modified Activated Sludge as a Low-Cost Adsorbent for Phosphate Removal in Aqueous Solution

A highly effective zirconium-modified activated sludge (Zr(IV)-AS) adsorbent was prepared from activated sludge and applied to remove phosphate from aqueous solutions by batch and column experiments. Characterized results revealed that zirconium was successfully loaded onto the activated sludge (AS), and the specific surface area and pore volume were substantially improved after zirconium loading on the AS. Zr(IV)-AS exhibited a high adsorption affinity for phosphate and the maximum adsorption amount was 27.55 mg P·g^?1 at 25 °C. Adsorption isotherms of phosphate could be described by the Langmuir model, and the adsorption kinetics were well described by the pseudo-second-order model. Phosphate adsorption on Zr(IV)-AS increased monotonically with decreasing solution pH. The presence of SO₄^2? in water resulted in slightly decreased phosphate adsorption on the adsorbent even at a high concentration (25 mmol/L), and a greater influence of HCO₃^? on adsorption could be ascribed to the increased solution pH with the addition of the HCO₃^?. Column adsorption experimental results showed that the adsorbent has excellent phosphate adsorption properties and that the effluent can meet the requirement of phosphorus in the national wastewater discharge standard of China. Phosphate-saturated Zr(IV)-AS can be effectively desorbed in 0.1 mol L^?1 NaOH solution, and the regenerated adsorbent still possessed the high capacity. The adsorption between the adsorbent and the phosphate is due to the electrostatic interaction and anionic exchange at the surface of the Zr(IV)-AS. Furthermore, this approach provides a possibility of treating wastewater with waste and has the potential for industrial applications for the removal of phosphate from wastewater.     

Evaluation of palygorskite for remediation of Cd-polluted soil with different water conditions

Purpose

The study aimed at comparing the effects of different water managements on soil Cd immobilization using palygorskite, which was significant for the selection of reasonable water condition.

Materials and methods

Field experiment was taken to discuss the in situ remediation effects of palygorskite on Cd-polluted paddy soils, under different water managements, using a series of variables, including pH and extractable Cd in soils, plant Cd, enzyme activity, and microorganism number in soils.

Results and discussion

In control group, the pH in continuous flooding was the highest under three water conditions, and compared to conventional irrigation, continuous flooding reduced brown rice Cd by 37.9%, and brown rice Cd in wetting irrigation increased by 31.0%. In palygorskite treated soils, at concentrations of 5, 10, and 15 g kg^?1, brown rice Cd reduced by 16.7, 44.4, and 55.6%; 13.8, 34.5, and 44.8%; and 13.1, 36.8, and 47.3% under continuous flooding, conventional irrigation, and wetting irrigation (p < 0.05), respectively. The enzyme activity and microbial number increased after applying palygorskite to paddy soils.

Conclusions

Continuous flooding was a good candidate as water management for soil Cd stabilization using palygorskite. Rise in soil enzyme activity and microbial number proved that ecological function regained after palygorskite application.

     

Soil nitrogen availability alters rhizodeposition carbon flux into the soil microbial community

Purpose

Soil microorganisms are important in the cycling of plant nutrients. Soil microbial biomass, community structure, and activity are mainly affected by carbon substrate and nutrient availability. The objective was to test if both the overall soil microbial community structure and the community-utilizing plant-derived carbon entering the soil as rhizodeposition were affected by soil carbon (C) and nitrogen (N) availability.

Materials and methods

A ¹³C-CO₂ steady-state labeling experiment was conducted in a ryegrass system. Four soil treatments were established: control, amendment with carboxymethyl cellulose (CMC), amendment with ammonium nitrate (NF), combined CMC and NF. Soil phospholipid fatty acid (PLFA) and ¹³C labeling PLFA were extracted and detected by isotope ratio mass spectrometer.

Results and discussion

The combined CMC and NF treatment with appropriate C/N ratio (20) significantly enhanced soil microbial biomass C and N, but resulted in lower soil inorganic N concentrations. There was no significant difference in soil PLFA profile pattern between different treatments. In contrast, most of the ¹³C was distributed into PLFAs 18:2ω6,9c, 18:1ω7c, and 18:1ω9c, indicative of fungi and gram-negative bacteria. The inorganic-only treatment was distinct in ¹³C PLFA pattern from the other treatments in the first period of labeling. Factor loadings of individual PLFAs confirmed that gram-positive bacteria had relatively greater plant-derived C contents in the inorganic-only treatment, but fungi were more enriched in the other treatments.

Conclusions

Amendments with CMC can improve N transformation processes, and the ryegrass rhizodeposition carbon flux into the soil microbial community is strongly modified by soil N availability.

     

Effects of temperature on soil organic carbon fractions contents,aggregate stability and structural characteristics of humic substances in a Mollisol

Purpose

Under a global warming scenario, understanding the response of soil organic carbon fractions and aggregate stability to temperature increases is important not only for better understanding and maintaining relevant ecosystem services like soil fertility and crop productivity, but also for understanding key environmental processes intimately related with the maintenance of other regulatory ecosystem services like global climate change mitigation through carbon sequestration. An increase in temperature would accelerate the mineralization of soil organic carbon. However, the properties of organic carbon remained in soil after mineralization is not well known.

Materials and methods

Mollisol was collected at 0–20-cm depth from maize (Zea mays L.) field in Northeast China. A 180-day incubation experiment was conducted at three different temperatures (10, 30, and 50 °C) under constant soil moisture (60 % water holding capacity). Soil samples were assayed for total organic carbon (TOC), water-soluble organic carbon (WSOC), easily oxidizable organic carbon (EOC), humic fractions carbon, aggregate-associated carbon, and water stability of aggregates. Elemental analysis and solid-state ¹³C nuclear magnetic resonance spectroscopy were used to characterize humic acid and humin fractions.

Results and discussion

The contents of soil TOC, EOC, humic fractions carbon, and aggregate-associated carbon decreased with the increase in temperature. The proportion of 2–0.25-mm macroaggregate and the mean weight diameter (MWD) of aggregates also decreased. The C, H, N, S, alkyl C, and O-alkyl C contents of humic acid and humin decreased, whereas the O, aromatic C, and carbonyl C contents increased. The H/C, aliphatic C/aromatic C, and O-alkyl C/aromatic C ratios in humic acid and humin fractions decreased.

Conclusions

The increase in temperature has a negative impact on soil organic carbon content, soil aggregation, and aggregate stability. Moreover, humic acid and humin molecules become less aliphatic and more decomposed with the increase in temperature.

     

Atmospheric Mercury Fluxes in a Southern Boreal Forest and Wetland

Total gaseous mercury (TGM) fluxes from the forest floor and a boreal wetland were measured by a flux chamber technique coupled with an automatic mercury vapour analyser. The fluxes were measured at three sampling sites in southern Finland, 61°14′ N, 25°04′ E in summer 2007, with additionally in situ TGM concentrations in the air at one of the sites and mercury bulk deposition at another. Most of the flux data were collected during the daytime. At one of the sites, diurnal flux behaviour was studied, and a clear cycle with an afternoon maximum and a night minimum was observed. The highest emissions (up to 3.5 ng m⁻² h⁻¹) were observed at the forest floor site having a moss and grass cover. At the wetland and litter-rich forest floor sites, the emissions were below 1 ng m⁻² h⁻¹ and sometimes negative (down to −1.0 ng m⁻² h⁻¹), indicating mercury uptake. The measured average fluxes in August were 0.9 ± 1.1 and 0.2 ± 0.3 ng m⁻² h⁻¹ for the forest floor sites and wetland sites, respectively. The flux data were compared with the mercury bulk deposition, which proved to be of the same magnitude, but opposite in sign. At the mossy forest floor site, the extrapolated TGM emissions were 130% of the Hg deposition in August 2007. Comparison with other studies showed that the fluxes in background areas are relatively uniform, regardless of measurement site location and method used. Airborne TGM remained at the background level during the study, with an average value of 1.3 ± 0.2 ng m⁻³; it frequently showed a diurnal cycle pattern.     

Interactive effects of Cd and PAHs on contaminants removal from co-contaminated soil planted with hyperaccumulator plant <Emphasis Type="Italic">Sedum alfredii</Emphasis>

Purpose  

Soil contamination by multiple organic and inorganic contaminants is common but its remediation by hyperaccumulator plants is rarely reported. The growth of a cadmium (Cd) hyperaccumulator Sedum alfredii and removal of contaminants from Cd and polycyclic aromatic hydrocarbons (PAHs) co-contaminated soil were reported in this study.     

Performance and Kinetic Study on Bioremediation of Diazo Dye (Reactive Black 5) in Wastewater Using Spent GAC–Biofilm Sequencing Batch Reactor

Combinations of sequential anaerobic and aerobic process enhance the treatment of textile wastewater. The aim of this study was to investigate the treatment of diazo dye Reactive Black 5 (RB5)-containing wastewater using granular activated carbon (GAC)–biofilm sequencing batch reactor (SBR) as an integration of aerobic and anaerobic process in a single reactor. The GAC–biofilm SBR system demonstrated higher removal of COD, RB5 and aromatic amines. It was observed that the RB5 removal efficiency improved as the concentration of co-substrate in the influent increased. The alternative aeration introduced into the bioreactor enhanced mineralization of aromatic amines. Degradation of RB5 and co-substrate followed second-order kinetic and the constant (k ₂) values for COD and RB5 decreased from 0.002 to 0.001 and 0.004 to 0.001 l/mg h, respectively, as the RB5 concentration increased from 100 to 200 mg/l in the GAC–biofilm SBR system.     

Short-term changes in nitrogen availability, gas fluxes (CO2, NO, N2O) and microbial biomass after tillage during pasture re-establishment in Rondônia, Brazil

Anthropogenic conversion of primary forest to pasture for cattle production is still frequent in the Amazon Basin. Practices adopted by ranchers to restore productivity to degraded pasture have the potential to alter soil N availability and N gas losses from soils. We examined short-term (35 days) effects of tillage prior to pasture re-establishment on soil N availability, CO₂, NO and N₂O fluxes and microbial biomass C and N under degraded pasture at Nova Vida ranch, Rondônia, Brazilian Amazon. We collected soil samples and measured gas fluxes in tilled and control (non tilled pasture) 12 times at equally spaced intervals during October 2001 to quantify the effect of tillage. Maximum soil NH₄⁺ and NO₃⁻ pools were 13.2 and 6.3 kg N ha⁻¹ respectively after tillage compared to 0.24 and 6.3 kg N ha⁻¹ in the control. Carbon dioxide flux ranged from 118 to 181 mg C–CO₂ m² h⁻¹ in the control (non-tilled) and from 110 to 235 mg C–CO₂ m² h⁻¹ when tilled. Microbial biomass C varied from 365 to 461 μg g⁻¹ in the control and from 248 to 535 μg g⁻¹ when tilled. The values for N₂O fluxes ranged from 1.22 to 96.9 μg N m⁻² h⁻¹ in the tilled plots with a maximum 3 days after the second tilling. Variability in NO flux in the control and when tilled was consistent with previous measures of NO emissions from pasture at Nova Vida. When tilled, the NO/N₂O ratio remained <1 after the first tilling suggesting that denitrification dominated N cycling. The effects of tilling on microbial parameters were less clear, except for a decrease in qCO₂ and an increase in microbial biomass C/N immediately after tilling. Our results suggest that restoration of degraded pastures with tillage will lead to less C matter, at least initially. Further long-term research is needed.     

Maintaining Genetic Resources of Peach Palm (<Emphasis Type="Italic">Bactris gasipaes</Emphasis> Kunth): The Role of Seed Migration and Swidden-fallow Management in Northeastern Peru

Knowledge of the effects of farmer practices on population genetic parameters of peach palm (Bactris gasipaes Kunth) is relevant to the improvement and conservation of the palm’s genetic resources. Microsatellite markers were used to assess genetic diversity and population structure of peach palm in swidden-fallow agroforestry systems in northeastern Peru. The study covered eight communities, comprising two study areas 160 km apart – one occupied by indigenous Amerindians and the other by mixed race campesinos. Simultaneous analysis of an ex situ peach palm germplasm collection provided a means to compare population genetic parameters. Farmers who were surveyed on seed selection practices for peach palm reported that an average of only four palms (4.3 for campesino and 1.5 for indigenous populations) were used to provide seed for the establishment of the forest gardens sampled. As expected, inbreeding coefficients observed within communities were relatively high (f = 0.105 − 0.210), however, observed heterozygosities within communities were also high (0.625–0.741). A metapopulation approach was used to describe migration within and among regions, implying a hierarchical structure of gene flow which maintains relatively high levels of genetic diversity. Seed migration was found to occur over longer distances (≤600 km) and at a higher frequency (46% of palms sampled) in the indigenous study area, and a proportionally greater number of alleles was found (49 vs. 43 over three loci) with twice as many private alleles occurring only in the indigenous populations. The farmers’ practice of preserving remnant palms through successive swidden generations may have contributed to the maintenance of alleles by reducing the severity of founder effects. Although the campesino study area exhibited a significant (20% of the variation; p < 0.01) isolation-by-distance relationship across 35 km distance, in general, both study populations had relatively limited genetic structure (θ = 0.012–0.03), which is believed to have resulted from the exchange of seeds over long distances and periods of time.     

Primary and secondary metabolite composition of kernels from three cultivars of Portuguese chestnut (Castanea sativa Mill.) at different stages of industrial transformation

Chestnut (Castanea sativa) is an important basic food in rural diets and a major starch crop used in a similar way to potatoes. Chestnuts are a fundamental economic resource in the "chestnut regions" not only for the fruit but also for the chestnut wood. Chestnuts have become increasingly important with respect to human health, for example, as an alternative gluten-free flour source. Chestnuts are also a rich source of other beneficial compounds, but there have been few studies on the composition during processing. In this study, we analyzed the chemical composition of three Portuguese cultivars at different stages of industrial processing. The chestnut cultivars were Longal, Judia, and Martaínha. All three cultivars had high moisture contents but were low in ash, crude fat, and crude protein contents, with high starch and low fiber contents. The free amino acid contents, including various essential amino acids, varied depending on the cultivar. All three cultivars also had a significant content of polyphenolics with gallic acid; ellagic acid was predominant among hydrolyzable and condensed tannins. Many of these compounds are known to exert significant positive effects on human health. The one-way analysis of variance for fresh chestnut shows significant differences among the three cultivars for most of the studied parameters. The same statistical analysis applied to each one of the two cultivars (Judia and Longal) sampled for the four processing steps analyzed indicates a significant effect of this factor in practically all of the constituents. On the other hand, the two-way analysis of variance shows that, besides the residual, the processing step and the interaction cultivar x processing step were the factors that more contributed for the total variation observed in the constituents analyzed, while the contribution of cultivar was much less significant.