Effect of dietary phosphorus supplementation on utilization of algae in the grow‐out diet of Nile tilapia Oreochromis niloticus

This research involved testing the replacement of corn gluten protein concentrate in the diet of 1.5 g Nile tilapia with biofuel algae‐based or algae supplemented with phosphorus diets. Experimental diets were formulated to replace 50% of the gluten meal protein in the control diet with biofuel algae protein (Alga50) or Spirulina (Spirulina50) protein. In addition, dicalcium phosphate (P) was added to the Alga50 at a concentration of 3.8% or 7.74% to mitigate aluminium (Al) toxicity and designated as Alga50 + P, and Alga50 + PP respectively. After 9 weeks of the feeding experiment, fish fed diets supplemented with P, Alga50 + P and Alga50 + PP differed significantly (P < 0.05) with respect to the feed conversion and protein deposition from the control. The mineral composition of the fish body showed a decrease in levels of Al and iron (Fe) due to the P supplements. The mineral composition of the faeces indicated that Al and Fe were excreted in the faeces and were not accumulated in the fish body. The effect of dicalcium P supplementation on the neutralization of Al in the diet resulted in improved fish growth and histological integrity of the gastrointestinal tract.     

Optimum rate of nitrogen fertilization for drip-irrigated wheat under semi-arid conditions

Limited water availability in arid and semi-arid wheat production systems increases the need of applying efficient drip irrigation systems. However, there is little information available about the optimum level of nitrogen (N) fertilization for drip-irrigated wheat. A two-years field study in the semi-arid region of Upper Egypt was carried out in a randomized complete block design to investigate the response of drip-irrigated wheat to three levels of N fertilization (N₁₂₀ = 120, N₁₈₀ = 180, and N₂₄₀ = 240 kg ha^?1). N₂₄₀ increased the uptake of N, P, and K by 66.3, 48.6, and 43.5%, respectively, as compared to N₁₂₀. The application of N₂₄₀ increased the grain yield by 28.4 and 40.4% and water use efficiency by 27.6 and 41.8% the first and second season, respectively, as compared to N₁₂₀. Based on the obtained results, it is recommended to fertilize drip-irrigated wheat by 240 kg ha^?1.     

Agro-morphological characterisation and selection of sorghum landraces

Sorghum [Sorghum bicolor (L.) Moench] grown under rain-fed conditions is frequently affected by drought stress at different stages, resulting in reduced grain and biomass yield. The aim of this study was to characterise sorghum landraces and to select farmer-preferred medium-maturing genotypes under rainfed and irrigated conditions. Hundred and ninety-six sorghum accessions were evaluated at Kobo site of the Sirinka Agricultural Research Center in 2014/2015 in Ethiopia. Data collected from 14 traits were subjected to analysis of variance, cluster analysis, Pearson’s correlation coefficient analysis, path coefficient analysis and principal component analysis (PCA). Significant genotypic differences (p?<?0.05) were observed. Medium-maturing and drought tolerant sorghum genotypes including E-72457, E-72438, E-72435, E-206214, E-72449, E-75460 and E-75458 with superior agronomic performance were recommend for large-scale production or for further breeding. The genotypes evaluated under rain-fed and irrigated conditions were grouped into five and six clusters, respectively, representing varied different heterotic groups. Grain yield had significant and positive correlation with yield-related traits assessed under the two test conditions. Further, path coefficient analysis revealed that days to maturity under rainfed condition and harvest index under irrigated condition had the highest positive direct effects on grain yield, therefore can be targets for direct selection. Overall, there was marked genetic diversity among the tested genotypes. Suitable medium-maturing farmers-preferred accessions selected from the study will be useful for effective breeding for drought tolerance and medium-maturity.     

Technology generation to dissemination: lessons learned from the tef improvement project

Indigenous crops also known as orphan crops are key contributors to food security, which is becoming increasingly vulnerable with the current trend of population growth and climate change. They have the major advantage that they fit well into the general socio-economic and ecological context of developing world agriculture. However, most indigenous crops did not benefit from the Green Revolution, which dramatically increased the yield of major crops such as wheat and rice. Here, we describe the Tef Improvement Project, which employs both conventional- and molecular-breeding techniques to improve tef—an orphan crop important to the food security in the Horn of Africa, a region of the world with recurring devastating famines. We have established an efficient pipeline to bring improved tef lines from the laboratory to the farmers of Ethiopia. Of critical importance to the long-term success of this project is the cooperation among participants in Ethiopia and Switzerland, including donors, policy makers, research institutions, and farmers. Together, European and African scientists have developed a pipeline using breeding and genomic tools to improve the orphan crop tef and bring new cultivars to the farmers in Ethiopia. We highlight a new variety, Tesfa, developed in this pipeline and possessing a novel and desirable combination of traits. Tesfa’s recent approval for release illustrates the success of the project and marks a milestone as it is the first variety (of many in the pipeline) to be released.     

Characterization and Leachability Propensity of Bottom Ash from Medical Waste Incineration

The leachability of bottom medical waste ash from a Jordanian incinerator was studied in this work. The ash was characterized in terms of particle size distribution, chemical and mineralogical composition followed by leaching of several size fractions at different conditions (leaching time, temperature, initial pH, particle size, and solid liquid ratio). The major elements found in the ash were Ca, Si, Al, Cl, Na, Fe, Ti, S, Mg, Ba, and K, while the main mineral phases found in the ash were calcite, halite, sylvite, anhydrite, hematite, hydrochlorborite, cristobalite, melanterite, and chlormayenite. Leaching data indicates that as leaching time and S/L increased, the concentration of metals increased in the leachate. The highest leaching level was at a S/L ratio of 60 mg/ml. As the particles sizes decreased, the concentration of the majority of metals studied increased. Meanwhile, the effect of particle size on other metals was not regular due to the fact that sieving resulted in more concentrated metals in certain particle size fractions. Leachability results also indicate that variation in the initial pH has a slight effect on the degree of leaching. The concentration of some metal ions increased with temperature, while others increased initially but subsequently decreased. The extracted quantities of all the heavy metals were less than the limits set by EPA.     

Quantitative trait loci of acid detergent fiber and grain chemical composition in hulled × hull-less barley population

Cultivated barley is the major livestock feed grain in the Northern Plains and Northwestern United States due to the fact that its short growing season and limited rainfall limit the planting and production of corn. Starch and fiber content play a significant role in feedlot performance of animals raised on barley feed. To study the underlying genetic locations and mechanisms for these traits, a recombinant inbred line population was derived from a cross between the hulled barley cultivar Valier and a hull-less Swiss landrace line, PI370970. Valier has a high acid detergent fiber content (ADF) and low starch and protein while PI370970 contains low ADF and high starch and protein content. To detect associated QTLs, data were collected and analyzed from irrigated and rain-fed environments. A total of 30 main effect QTLs and four epistatic QTLs were identified which conditioned ADF, starch and protein content under rain-fed, irrigated and combined analyses. These QTLs were located on chromosomes 2H, 3H, 5H, 6H and 7H. Major ADF and starch QTL were identified on chromosome 7H near the nud locus (the locus controlling hulled vs. hull-less caryopsis). High heritability estimates for both ADF and starch content suggest that early selection for these traits during breeding would be productive. Low ADF-QTL were independently verified in a second population in a different genetic background.     

Quantitative trait loci for dry matter digestibility and particle size traits in two-rowed × six-rowed barley population

More than half of the barley grown in the USA is used for livestock feed, with the remaining stocks diverted for human food and malting purposes. The use of barley grain as a major source of cattle feed has been criticized because of its rapid digestion in the rumen, which can result in digestive disorders in cattle. In sacco dry matter digestibility (ISDMD) and particle size (PS) after dry rolling have been found to play a role in the feedlot performance of barley as a feed grain. Reducing the rate of ISDMD is predicted to result in significantly improved animal health and average daily gain. A recombinant inbred line population derived from a cross between a high ISDMD, two-rowed barley cultivar (Valier) and a six-rowed Swiss landrace line (PI370970) exhibiting far slower ISDMD has been developed for studying the underlying genetic locations and mechanisms of these traits. To detect associated quantitative trait loci (QTLs), we collected and analyzed data from irrigated and rain-fed environments. A significant negative correlation was observed between ISDMD and PS. High heritability estimates for ISDMD and PS suggest that early selection for these traits during breeding would be achievable. Four QTLs were identified on chromosomes 2H, 6H, and 7H, explaining 73–85% of ISDMD phenotypic variation, while three QTLs on 2H and 7H were associated with variation in PS and explained 58–77% of its variation. A major QTL on chromosome 2H tightly linked to the morphology-modifying gene vrs1 was found to dramatically control 35–62% of the phenotypic variation of ISDMD and 26–53% of that of PS. The impact of the vrs1 locus on ISDMD was validated in two populations representing different genetic backgrounds. Our results suggest that it may also be advantageous to simultaneously overlap these QTLs around the vrs1 locus.     

Breeding rice for rice yellow mottle virus resistance in Sub-Saharan Africa: a review

Rice is the world’s second most produced staple cereal crop after wheat. Currently, rice production and consumption have steadily increased in Sub-Saharan Africa (SSA). To date, rice is the largest imported commodity crop in the region. The low productivity is due to a number of biotic and abiotic stresses, and socio-economic constraints. Among the biotic constraints, rice yellow mottle virus (RYMV) is the most important constraint to rice in SSA. In SSA, RYMV causes yield losses ranging from 20% to 100%. Various control strategies (host resistance, cultural practices and chemicals) have been recommended to manage RYMV epidemics. RYMV disease management through generic crop protection chemicals is not economic nor is it successful due to the presence of a large number of vector species disseminating the virus. In addition, cultural practices are ineffective against RYMV because the virus is spread by several agents, including insect vectors. The use of RYMV resistant cultivars remains the most effective, economic and environmentally friendly method for resource poor farmers. However, RYMV resistant varieties have not yet been developed and deployed in SSA. The aim of this review was to present the main components in the development of rice cultivars with RYMV disease resistance. The paper provides a comprehensive review on the genetic variability of the RYMV, its epidemiology and control measures, and the gene action responsible for RYMV resistance.

The review also summarises complementary genomic tools useful in RYMV disease resistance breeding.

Successful breeding of rice for RYMV resistance depends on the availability of genes for stable resistance, knowledge of the genetics of the host and, the availability of efficient phenotyping and pathotyping methods, and understanding of the genes involved and their pattern of inheritance. Information presented in the review can serve as a reference guide for rice breeding emphasising RYMV resistance, high yields and farmers-preferred traits.     

Preliminary investigation of the effect of ethyl 4'fluorooxanilate as a male gametocide of sweet stem sorghum

An effective male sterility system enables targeted crosses between parent plants with desired and complementary characteristics. The use of chemical hybridising agents (CHAs) to induce male sterility is quicker and more efficient than manual emasculation. This study investigated the concentration, stage of application and frequency of application of ethyl 4'fluorooxanilate (E₄FO) for inducing male sterility of sweet stem sorghum without affecting female fertility. In Trial 1, the dose rate of E₄FO was determined to optimise male sterility. In this experiment three genotypes were tested at E₄FO dose rates. In Trial 2 the frequency of application of E₄FO was determined using three sweet stem sorghum genotypes, three E₄FO doses, and six frequencies of application. Data on sterility was inferred based on seed set and seed count from the treated plants. Male sterility was achieved when E₄FO was applied during heading stage using the following rates: 1?g l^?1, 1.5?g l^?1 and 2?g l^?1, with more than one application. Applying E₄FO twice during the heading stage at a rate of 2?g l^?1 would induce male sterility in the tested sweet stem sorghum genotypes, a result that could be useful in hybrid breeding programmes.     

Groundnut (Arachis hypogaea L.) improvement in sub-Saharan Africa: a review

Groundnut (Arachis hypogaea L.) is a multi-purpose legume crop widely cultivated in sub-Saharan Africa (SSA). However, yield levels of the crop has remained relatively low in SSA owing to a range of biotic, abiotic and socio-economic constraints. A dedicated groundnut improvement programme integrating new tools and methodologies to breed varieties suitable for current and emerging agro-ecologies and market needs is essential for enhanced and sustainable groundnut production in SSA. The objective of this review is to highlight breeding progress, opportunities and challenges on groundnut improvement with regard to cultivar development and deployment in SSA in order to guide future improvement of the crop. The review analysed the role of new tools in breeding such as, high-throughput and automated phenotyping techniques, rapid generation advancement, single seed descent approach, marker-assisted selection, genomic selection, next-generation sequencing, genetic engineering and genome editing for accelerated breeding and cultivar development of groundnut.